88036 Results for: "Ore Sample Bags"

Supplier: DAKLAPACK

These stand-up pouches are suitable for products which need special requirements for packaging such as food, drink or pharmaceutical products. They can be used for the packaging of samples, substances and preparations.

Supplier: Sampling Systems

The SteriWare Ultra range is the premium range from Sampling Systems. These powder funnels are double bagged and are made from high quality USP class VI HDPE. A box liner is also used giving a third layer of protection.

Supplier: Sampling Systems

Sack clips are designed for the easy closing and sealing of bags.

Supplier: GERHARDT

For rapid determination in accordance with Weender, Van Soeste et al. Use fine mesh bags to weigh the sample. A glass diffuser is then placed inside the bag, allowing the reagents to diffuse freely. Six samples can be processed simultaneously: clean, boil in sulphuric acid, rinse, boil in KOH, rinse again and dry.

Supplier: MERCK LIFE SCIENCE

RT/RTplus contact plates are the ideal choice for sampling dry, sanitised surfaces in less critical areas. They are single-bagged and non irradiated.

Supplier: 3M Food Safety

The 3M™ Dry-Sponge is a biocide-free cellulose sponge that comes with a printed sample bag.

Supplier: Sampling Systems

The SteriWare Ultra range is the premium range from Sampling Systems. These premium sterile scoops are double bagged and are made from high quality USP class VI HDPE. A box liner is also used giving a third layer of protection.

Supplier: Sampling Systems

Quick clip provides an instant seal for bags.

Supplier: INTERSCIENCE

BagPage® single use bags with filter membrane reduce analysis time thanks to their wide opening and markings showing where to introduce the pipette. Ideal for pasty products, cheese, flour and cakes. To use: Place the sample in the opened compartment (Fig. 1). Mix and then add reagents into the specially designed compartment (Fig. 2).

Supplier: Corning

These storage boxes are the ideal solution to store samples over an extended period of time. Engineered to simplify sample identity as its polypropylene structure is meant to last.

Supplier: Sampling Systems

The slot sampler is perfect for taking large volume, cross sectional samples from containers, big bags, bins and so on.

Supplier: Corning

PP, translucent.

Supplier: PerkinElmer

Translucent polypropylene tubes are designed to provide excellent chemical resistance.

Supplier: SARSTEDT

PS, clear or PP, translucent.

Supplier: G-Biosciences

The concentrator is a high molecular weight polymer which will not migrate across the dialysis membrane. The concentrator is placed against the dialysis membrane of the Tube-O-DIALYZER™, where it rapidly absorbs water from the sample and reduces the sample volume. The concentrator can be used with dialysis bags and other dialysis devices.

Supplier: Grade Products

High grade polymer mixture, ideal for any food laboratory sample blenders.

Supplier: Sampling Systems

These single use knives are made from food grade plastic (100% virgin HDPE). Ideal for sample preparation and general laboratory use.

Supplier: ProAmpac

114 micron high barrier, crystal clear, three side seal, heat sealable polyester pouches.

Supplier: Sampling Systems

SteriWare® Single use long handled spoons are ideal for reaching into large containers or difficult to reach places. It can be used straight from the bag and manufactured under cleanroom conditions so they can be used without costly cleaning.

Supplier: Sampling Systems

Lockable sampler case with metal hinges (870×285×116 mm)

Supplier: Sampling Systems

These labels are made from a clear PP film. They are ideal for sealing bags and sacks.

Supplier: Bel-Art Products, a Part of SP

Ideal for multi-zone cleanrooms, these one-piece double-bagged Sterileware® sampling scoops are the perfect shape and size for taking samples, especially from wide mouth containers.

Supplier: IKA

Combustion bags, PE, with known calorific value, to fill in samples with a low calorific value, powdery and with low specific gravity, 70×40 mm, C 12 A

Supplier: BOETTGER PAUL

Made of PP, translucent. Mailing containers for medical and biohazard samples.

Supplier: LABCON

ViewPoint™ tubes are designed to help track the real-time temperature of samples when doing bench work or transferring samples to storage. ViewPoint™ centrifuge tubes visibly signal the temperature of the tube and contents, shifting to dark blue when the temperature of tube contents is below 0 °C.

Supplier: Sampling Systems

ID tape helps to prevent handling errors by allowing containers, pallets, bags and so on to be easily labelled with highly visible messaging. Operators can quickly identify the status of a container to prevent it from being used in error.

Supplier: VWR Collection

−20 °C mini labtop cooler PC, non toxic gel: The −20 °C mini labtop cooler holds 12×0,5 or 1,5 ml microcentrifuge tubes at below −20 °C for over one hour. Ideal for bench top use or transport. Filled with non toxic gel. Prior to use, place in −25 °C freezer for at least 24 hours, store at −25 °C between use.

Supplier: EPPENDORF

Eppendorf® Conical Tubes with SnapTec® caps offer secure sample containment for diverse applications. The innovative SnapTec® Cap ensures easy, secure sealing, making them ideal for molecular biology, genomics, and more. The conical design aids optimal sample recovery, enhancing efficiency and reliability in the lab.

Supplier: Sampling Systems

Single use, disposable liquid funnels ideal for laboratories and manufacturing areas. Designed to use straight from bags.

Supplier: DELTALAB

These filter tips avoid aerosols and prevent pipette and / or sample contamination.