1219 Results for: "LABCONCO"

Supplier: LABCONCO

XPert weigh boxes have inlet and outlet HEPA filters and provide a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

Supplier: LABCONCO

Telescoping base stands with fixed feet, nominal width of 76,2 mm, 914×737 mm, 43 kg, For: —

Supplier: LABCONCO

This Kjeldahl digestion/distillation apparatus combines macro digestion and distillation processes for nitrogen determination of samples up to five grams into one space-saving unit.

Supplier: LABCONCO

Desiccator cabinet, Vacuum tubing kit, with tubing inner Ø 6,35 mm and 12,7 mm, each 1219 mm long, tubing clamps, barbed reducer

Supplier: LABCONCO

CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).

Supplier: LABCONCO

XPert™ filtered balance stations are vented balance enclosures designed to protect the user during powder weighing operations. The built-in HEPA filter, mounted in the upper plenum, removes particulates, so that clean air is exhausted to the atmosphere. XPert® filtered balance station is 'stationary' because ducting to an outside blower or house exhaust system is required. Powder weighing applications found in pharmaceutical research and other industries are ideal for these enclosures. Interior dimensions accommodate large micro and analytical balances and containment-enhancing features ensure personnel safety.

Supplier: LABCONCO

This evaporator speeds evaporation of up to 50 samples at the same time using dry heat and nitrogen blow down. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination.

Supplier: LABCONCO

These Biosafety cabinets provide personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. Cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research.

Supplier: LABCONCO

Handy cart stores lab supplies and may be moved easily to within reach of the user working at a bench, fume hood or biological safety cabinet. Three right side compartments accommodate pipettes and other supplies. Top left side compartment with front panel cutouts accommodates boxes of wipes and gloves. The hinged panel may be pivoted down for loading. Drawer holds a variety of miscellaneous small instruments and supplies. Open storage area in bottom holds larger equipment and supplies. Work surface and bottom are constructed of corrosion-resistant white high density polyethylene that is easy to clean. Remaining components are constructed of corrosion-resistant white ABS.

Supplier: LABCONCO

This glove box is designed to create controlled oxygen and moisture atmospheres for working with products that are easily oxidized. The glove box features a one-piece moulded fibreglass liner, two 25 W fluorescent lights, and an optional pressure control module.

Supplier: LABCONCO

Watertight pan cart with durable 18-gauge welded steel frame has a glacier white epoxy-coated rust-resistant finish. Ideal for transporting cellware, cages, glassware, and more.

Supplier: LABCONCO

This glove box provides a leak-tight environment for work with contamination-sensitive materials.

Supplier: LABCONCO

This system uses nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once.

Supplier: LABCONCO

PVC exhaust duct is type one, unplasticised, schedule 40, lightweight, and corrosion-resistant.

Supplier: LABCONCO

Use the Sash-glider to clean both sides of a biological safety cabinet's sash while it remains closed, to avoid contamination risks.

Supplier: LABCONCO

Versatile and efficient glassware washers designed for efficient and consistent washing of narrow-neck glassware and general labware in critical washing environments.

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: LABCONCO

It offers a choice to protect materials that do not generate harmful aerosols or vapors. Its been designed with 99,99% efficient HEPA filter, the air from this minimizes cross contamination in the work area and provides a particulate free work environment. It has wide range of applications including plant tissue culture research, media preparation, electronic part inspection, syringe filling, medical device assembly and non hazardous parenteral drug formulation. These benches should never be used in conjunction with biohazardous material, toxins or radionuclides.

Supplier: LABCONCO

This mobile equipment table may be used to transport heavy equipment and to provide auxiliary bench space. With height adjustments from 28,75 to 35,75", it may be raised to the same height as most laboratory benchtops. Solid epoxy work surface, powder-coated square tubular steel frame.

Supplier: LABCONCO

Purifier Logic+ Class II Type A2 Biosafety Cabinets are suitable for work with agents that require Biosafety Level 1, 2 or 3 containment.

Supplier: LABCONCO

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: LABCONCO

Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Supplier: LABCONCO

Produce up to 350 liters per minute of pure nitrogen.

Supplier: LABCONCO

Heated product shelf chambers with valves.

Supplier: LABCONCO

Kjeldahl distillation units are designed with mounting on a base cabinet or table. One-piece borosilicate glass connecting bulbs separate liquid from vapors prior to the vapors entering the condenser and effectively traps caustic mist that may carry over to the recovery solution and One-piece borosilicate glass delivery tubes with long necks, round bottoms and thick walls to help eliminate pressure fluctuations in the distillation phase.

Supplier: LABCONCO

Safely transports heavy instruments and bulky equipment. Holds up to 181 kg. Welded frame is constructed of rugged, 18-gauge glacier white epoxy-coated 2,5 cm square tubular steel.

Supplier: LABCONCO

Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Supplier: LABCONCO

This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: LABCONCO

Explosion-proof light fixture kit for mounting on fiberglass, includes explosion-proof incandescent light fixture, mounting hardware, 330×177 mm

Supplier: LABCONCO

The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.