1261 Results for: "Cole Parmer"

Supplier: Cole Parmer

Battery operated, ideal for use almost anywhere.

Supplier: Cole Parmer

Shaker, Rocking/Rotating Shaker, stuart®

Supplier: Cole Parmer

The SHM1 is a powerful, variable speed, handheld homogeniser. The high-speed, high-torque motor makes the unit ideal for most homogenising applications. During operation the rotor shaft, which is directly coupled to the motor, spins at up to 35000 rpm. The tube assembly that fits around the shaft remains static and as the rotor shaft spins, within the tube assembly, it creates a pumping action drawing the sample into the open end of the tube, or probe, and forcing it through the windows at the bottom of the tube assembly. This shearing action reduces the particle size of the sample.

Supplier: Cole Parmer

Electronic temperature controller for CC162 and SC162 magnetic hotplate stirrers.

Supplier: Cole Parmer

The all glass construction and silica sheathed heating element ensure exceptionally high quality pyrogen-free distillate (although distillate should be tested). Fitted with two independent thermostats to prevent overheating in the event of cooling water supply failure; one is mounted in the condenser vent tube to quickly detect water supply failure and the second is mounted inside the boiler. Either will turn off the heater if the water supply becomes too Low. The second thermostat also acts as a backup to the first for extra security. As there is no metal in contact with the water, the Distinction D4000 eliminates the risk of metal ions Leeching out into the water causing contamination to the distillate. The unit is also fitted with a Level control device that will automatically turn off the heater when the reservoir is full. This allows the still to run unattended without risk of the reservoir overflowing.

Supplier: Cole Parmer

Stainless steel.

Supplier: Cole Parmer

Shaker, Rocking/Rotating Shaker

Supplier: Cole Parmer

Shaker, Vortex Mixer, stuart®, Accessory kit (only for SA8), containing 1× plastic cradle for standard microtitre plate, 1× circular foam insert for beakers and flasks up to 500 ml, 1× rectangular foam insert (holds 8×0.2 ml, 8×0.5 ml and 16×1.5/2.0 ml microcentrifuge tubes) and 1× solid rectangular foam insert for custom drilling.

Supplier: Cole Parmer

Save money by conserving reagents.

Supplier: Cole Parmer

Recirculation valve, stuart®, For: Pressmatic® R bottle top dispensers

Supplier: Cole Parmer

Mini vortex mixer with a vigorous mixing action is ideal for re-suspension of cells and pellets. It is a simple device, commonly used in laboratories to mix small vials of liquid, such as reagents of an assay.

Supplier: Cole Parmer

Range of quiet running overhead stirrers to meet all laboratory requirements.

Supplier: Cole Parmer

Shaker, Rocking/Rotating Shaker, stuart®

Supplier: Cole Parmer

No more reading glass thermometers.

Supplier: Cole Parmer

Samples in a capillary tube with sealed end are positioned in the heating block. The heating rate is adjusted manually. The instrument will rapidly heat up at a rate of 20 °C per minute to the set melt temperature and up to a maximum temperature of 250 °C. Accurate readings to within 1 °C of the melt temperature can be achieved by using a slower heating rate of between 1 and 10 °C per minute. Samples are illuminated by a bright white LED and viewed via a magnifying lens, which can be easily cleaned.

Supplier: Cole Parmer

Reduce drying time and contain spilled liquids with this chemical resistant containment tray. Holds one ¹/₄ L of spilled liquid. Easy to clean simply lift off the white grid and empty.

Supplier: Cole Parmer

Stand holder for probe

Supplier: Cole Parmer

A fast and convenient way of concentrating multiple samples in a block heater at once, it utilises a simple gas delivery system where gas is passed over the sample surface via stainless steel or PTFE coated needles. The gas delivery needles are inserted into a silicon membrane, in virtually any configuration. The height of the gas reservoir is located on an adjustable stand for accurate height control, making the sample concentrator compatible with any combination of block heater sample vessels.

Supplier: Cole Parmer

Analogue block heaters for precise heating of test tubes, microcentrifuge tubes, cuvettes and microtitre plates, units provide uniform and stable temperatures.

Supplier: Cole Parmer

The 'hot' warning light will flash whenever the plate temperature is above 50 °C and will operate even when the hotplate is turned off if the unit is still connected to the mains. Powerful magnets and motor give stirring speed up to 1500 min⁻¹ and volumes up to 15 L. Model SB302 has a robust aluminium/silicon alloy top plate that will withstand the knocks of everyday use, the 600 W element and good heat transmission of this material gives rapid heating and ensures even temperature distribution across the whole of the plate. Model CB302 has an easy to clean glass ceramic top with excellent chemical and temperature resistance, which allows very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. With fitting for retort rod.

Supplier: Cole Parmer

Lid for 15 l bath, stuart®, For: SW15D

Supplier: Cole Parmer

These stainless steel tongs with wide jaws (25 mm) firmly grip beakers from 100 to 1500 ml.

Supplier: Cole Parmer

Enhance your digital colony counter.

Supplier: Cole Parmer

Get accurate surface temperature in real time.

Supplier: Cole Parmer

Mixer designed for reliability and durability.

Supplier: Cole Parmer

Support rod, length 305 mm, steel, Cole-Parmer®

Supplier: Cole Parmer

Made from anodised aluminium, all blocks except 460-0017 and 460-0014 have W×D×H of 75×95×50 mm, so they can be used in any combination.

Supplier: Cole Parmer

Orbital Shaker, Cradle system with 4 securing bars

Supplier: Cole Parmer

This drum consists of a four segment Perspex® cradle. Each segment is fitted with a fully adjustable Velcro strap.

Supplier: Cole Parmer

The recirculating coolers offer powerful cooling for an external device. By accurately controlling the temperature of your cooling medium down to -20°C, efficiency of operations such as condensing can be greatly improved. A recirculating cooler is not only much more powerful than conventional water cooling, but is also an ideal alternative when water consumption is an issue for economical, environmental or practical reasons. The SRC5 provides a powerful cooler with a compact footprint suitable for mounting on or under a bench. The LED digital display clearly shows the current temperature of the cooling medium to ±2°C, while the set temperature is revealed by a one button press. The unit has a dedicated drain for easy emptying and cleaning. It also incorporates a built in safety alarm to indicate an overload relay for the refrigeration unit. A dust filter is incorporated and can be accessed without tools via the removable front panel. With all the features of the SRC5 the SRC14 is ideal where larger volumes are required, or when extra cooling capacity is needed, electron microscopes for example. The unit is floor standing with lockable easy roll castors to ensure excellent mobility.