1182 Results for: "Bohlender"

Supplier: Bohlender

Clear, polycarbonate. Each compartment has one door with snap fit closing and integrated gasket ensuring easy opening and tight closure. Temperature resistant from −35 to +70 °C, suitable for use under normal pressure.

Supplier: Bohlender

Screw caps, made of PP, with handy knurl.

Supplier: Bohlender

Straight fitting made of PP, with two hose connectors for elastic tubing.

Supplier: Bohlender

Valve body made of PP with connection (thread UNF ¼" 28G) suitable for b.safe caps. Lid with aeration opening and Luerlock connector, integrated non-return valve with upstream porous PTFE membrane (1 μm), including clip-on service life indicator.

Supplier: Bohlender

Silicone with PTFE washers.

Supplier: Bohlender

Ideal for cutting plastic and rubber tubing with and without textile reinforcement.

Supplier: Bohlender

GL 14 and GL 18 hose connectors, made of PFA, GL 25 and GL 32 hose connectors, made of PTFE, with elastic sealing lip and FPM O-ring and nut made of PPS.

Supplier: Bohlender

Protection sheets made from PTFE or FEP.

Supplier: Bohlender

This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on vessels and round flasks with ground joint.

Supplier: Bohlender

Boiling stones, made of PTFE, white, prevent chemical splashes and production of big bubbles when boiling the medium. Grain size: 4 mm. Packed in resealable bag. FDA conformity.

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: Bohlender

PP screw cap, green, distributor body and tubing connectors made from PP

Supplier: Bohlender

For use as a table pad, slideway or for insulation.

Supplier: Bohlender

Combination of borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made
of polyphenylene sulphide.

Supplier: Bohlender

Canister with S60/61 thread (DIN60/61) for the collection of liquid waste.

Supplier: Bohlender

Canister with thread GL 45 (DIN 45) for the collection of liquid waste.

Supplier: Bohlender

Filter body made of PP with connector (thread GL 14) for b.safe waste caps. Lid with aeration openings and service life indicator with additional label field to monitor service life. Filling made of activated carbon for adsorption of solvents.

Supplier: Bohlender

Standard magnetic stirring bar with PTFE-encapsulated magnetic core (Alnico 5).

Supplier: Bohlender

Adaptors, made of PTFE, white, allow the use of BOLA multiple distributors for bottles with female thread GL 45 also on bottles with GL 32, GL 40 and S 40 threads.

Supplier: Bohlender

PPS (polyphenylsiloxane) screw cap, black with joint insert made from PTFE.

Supplier: Bohlender

Screw cap and clamping ring made from PPS, sealing ring and tapered ring (ferrule) made from PTFE.

Supplier: Bohlender

Precast tweezers made of PTFE.

Supplier: Bohlender

Reusable clamps with PTFE-encapsulated steel spring core for connecting ground joint parts.

Supplier: Bohlender

Green screw cap, made of glass-fibre reinforced PP, and distributor body made of PP.

Supplier: Bohlender

Screw caps, made of PPS, with handy knurl and integrated PTFE membrane gasket.

Supplier: Bohlender

b.safe caps together with fittings, tubing and an air valve form a perfect unit for solvent extraction from laboratory flasks.

Supplier: Bohlender

Made of PFA to close unused connections (thread UNF ¹/₄" 28G) on b.safe caps and b.safe waste caps.

Supplier: Bohlender

Screw cap made of PPS for GL 45 thread / PP for GLS 80 thread, free movable insert made of PP with 4 lateral connectors (GL 45) suitable for b.safe Caps GL 45 and 3 centric capillary connectors (UNF ¹/₄"). Version and scope of delivery as per below chart.

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

Adapter with screw fitting made from PPS, cone joint body made from PTFE.