You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Ferrules for Agilent 5890, 6890 and 6850 instruments
Supplier: Thermo Fisher Scientific
Replacement SilTite™ ferrules for use with all SilTite™ connectors, SilTite™, Hole Ø: 0,32 mm
Expand 22 Items
Small flanges with hose nozzle
Supplier: VACUUBRAND
These flanges are made from aluminium or plastic.
Expand 13 Items
Small flanges with thread
Supplier: VACUUBRAND
These small flanges with thread made of stainless steel.
Expand 6 Items
Capillary column end caps
Supplier: Thermo Fisher Scientific
These capillary column end caps are universal and fit any capillary column.
Expand 1 Items
Hose connectors, Nalgene™
Supplier: Thermo Fisher Scientific
PP, white.
Expand 2 Items
Reducing pieces with small flanges KF
Supplier: VACUUBRAND
Reducing pieces with small flanges KF made of aluminium or stainless steel.
Expand 10 Items
GC capillary column connectors, Finger Tite
Supplier: Thermo Fisher Scientific
Metal-to-metal seal eliminates contamination and gives lower air/water background noise. No need to retighten ferrules, as they expand and contract with the fitting over GC operating temperatures.
Expand 6 Items
Reducing tee, stainless steel, type KF
Supplier: Welch by Gardner Denver
Reducing tees, type KF made of stainless steel.
Expand 1 Items
Adapters, swivelling screw fittings for GL threads, BOLA
Supplier: Bohlender
Screw cap made from PPS, inner section made from PTFE.
Expand 4 Items
SilTite™ µ-Union GC Capillary Column Connectors
Supplier: Thermo Fisher Scientific
The SilTite µ-Union is a connector for GC capillary columns, giving zero dead volume. It has low thermal mass, is only 9 mm in length and has a mass <0,5 g.
Expand 12 Items
Small flanges KF, screw-on
Supplier: VACUUBRAND
Small flanges made of stainless steel with sealing ring made of NBR.
Expand 3 Items
Tubing connectors, L-shaped, Bayonet type
Supplier: COWIE
L-shaped right angle connectors, made of PTFE, for tubings.
Expand 7 Items
Adapters, tubing, KA, KECK™, DURAN®
Supplier: DWK Life Sciences
KECK™ adapters are made up of glass-fibre reinforced, thermoplastic polyester (PBT) for glass hose couplings KA.
Expand 4 Items
Blind small flanges
Supplier: VACUUBRAND
Blind small flanges KF made of aluminium or stainless steel.
Expand 8 Items
Elbows, type KF
Supplier: Welch by Gardner Denver
Elbows, type KF, DN 25, Stainless steel
Expand 3 Items
Blank flanges, type KF
Supplier: Welch by Gardner Denver
Blank flanges KF made of nickel-plated aluminium or stainless steel.
Expand 4 Items
T-pieces with small flanges
Supplier: VACUUBRAND
T-pieces with small flanges KF made of aluminium or stainless steel.
Expand 8 Items
Flanges with tubulation, type KF
Supplier: Welch by Gardner Denver
Flanges with short tubulation, type KF, DN16, Stainless steel
Expand 4 Items
Screwthread joints for VACUU.LAN®
Supplier: VACUUBRAND
Adapters for VACUU.LAN® local area vacuum network components.
Expand 13 Items
Fittings, RheFlex®, Rheodyne®
Supplier: IDEX RHEODYNE
RheFlex® tube fittings provide inert, non-metal connections, and can be used with all Rheodyne injectors, valves and sample loops.
Expand 28 Items
Elbow pieces with small flanges KF
Supplier: VACUUBRAND
These elbow pieces with small flanges are made of aluminium or stainless steel.
Expand 8 Items
Small flanges with weld stub short
Supplier: VACUUBRAND
These small flanges with weld stub short are made of stainless steel.
Expand 5 Items
Metal bellows with small flanges KF
Supplier: VACUUBRAND
Metal bellows with small flanges made of stainless steel.
Expand 4 Items
Reducing cross pieces with small flanges
Supplier: VACUUBRAND
Reducing cross pieces with small flanges KF made of aluminium or stainless steel.
Expand 4 Items
Adapters, type KF
Supplier: Welch by Gardner Denver
Adapters, stainless steel, type KF, DN 25, Stainless steel, Width: 60 mm
Expand 6 Items
Adapters, extension
Supplier: COWIE
NPT extension adapters are manufactured in glass filled PTFE for improved mechanical strength.
Expand 7 Items
Taper fittings for standard glass joints
Supplier: COWIE
Compression fittings are manufactured from pure PTFE with a PEEK olive to give a secure grip.
Expand 91 Items
Cole-Parmer® Cleanroom Hose Barb Fitting
Supplier: Cole Parmer
This is used in cleanroom to minimise contamination by pollutants.
Expand 1 Items
Supplier: EPPENDORF
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: Integra
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: TESTO
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio