You searched for: Cleanroom Wipes

Supplier: Texwipe

Alpha® 1 Microfibre cleanroom wipes are made from a 80% polyester/20% nylon material with a sealed edge, and are cleanroom manufactured.

Supplier: Texwipe

Vertex® wipes are the cleanest, most consistent, and most rigorously quality tested cleanroom wipes.

Supplier: Texwipe

Absorbent, single ply, 100% continuous filament polyester wipes, feature enhanced sorbency.

Supplier: Texwipe

Revolve™ wipes, sustainable wipes made for the cleanroom industry, are made from 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

This soft 100% melt-blown PP wipe is pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionised water solution.

Supplier: Texwipe

ThermaSeal™ wipes are hot cut polyester wipes for all-purpose cleaning in critical environments. Ideal for cleaning medical devices, displays and products in the semiconductor and microelectronics area.

Supplier: Texwipe

This non woven 55% cellulose/45% polyester blend wipe is an excellent general-purpose sterile wipe in areas where economy and cleanliness are of critical importance.

Supplier: Texwipe

ThermaSat™ 60 wipes are made from 100% polyester with a sealed edge, and cleanroom laundered.

Supplier: Texwipe

TechniCloth® wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe.

Supplier: Texwipe

These wipes are primarily intended for the usage as flat mop covers for cleaning and decontaminating floors. Made of non-woven polyester, they are especially suitable for cleaning and removing residues.

Supplier: Texwipe

These pre-wetted wipes are made of a fabric blend of 55% non woven hydroentangled cellulose and 45% polyester.

Supplier: Texwipe

This 100% polyester double knit microdenier wipe made on Texwipe's Vertex process is ideal for wiping surfaces that are most susceptible to scratching.

Supplier: Texwipe

MiracleWipe® is made from 100% continuous-filament nylon. The double-knit construction, texture and body of the nylon filament give the wipes excellent softness and superior strength.

Supplier: Texwipe

This wipe made of 55% non woven cellulose and 45% polyester fibre is pre-saturated with 6% IPA.

Supplier: Texwipe

These hot-cut polyester wipes are suitable for all-purpose cleaning in critical cleanroom environments.

Supplier: Texwipe

This wipe is constructed from a non woven blend of 55% cellulose and 45% polyester that offers both durability and absorbency. The blue tint indicates exposure to liquid which makes the wipe ideal for alerting the user to the exposure of liquids and/or dangerous spills.

Supplier: Texwipe

These 100% polyester wipes are made by a hydroentanglement process using jets of water to mechanically entangle the fibres, eliminating the need for chemical binders.

Supplier: Texwipe

Cut-edge polyester single ply wipe that is ideal for floor cleaning and for applying cleaning solutions and disinfectants on floors.

Supplier: Texwipe

TechniScrub™ dry wipes are made from a 50% polyester/50% cellulose non woven material with a cut edge. They are cleanroom manufactured.

Supplier: Texwipe

SterileWipe™ LP 10 is a 100% continuous-filament polyester wipe with thermally sealed borders that have been designed to control particle and fiber contamination. The wipe is suitable for cleaning sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

Supplier: Texwipe

These single-ply, heavyweight polyester sealed-border wipes offer the same capacity sorption as a two-ply wipe. They are suitable for all general purposes as well as for applying and removing large volumes of cleaning solutions and disinfectants.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

VersaWipe® is made from 45% polyester / 55% cellulose non woven material with a cut edge. Ideal for spill control, cleaning, and solution application.

Supplier: Texwipe

Sterile TexTra™ is a single-ply, double-knit, 100% continuousfilament polyester wipe that offers high-capacity sorption in a heavyweight, large surface area wipe. It is an economical alternative to two-ply polyester wipes and ideal for spill control as well as for cleaning pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, and microbiological laboratories.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Brand

Fleece wipes for impregnation with universal or disinfecting detergents.

Supplier: Texwipe

These lightweight, high quality wipes are constructed from 100% continuous-filament polyester.

Supplier: Texwipe

These 100% continuous filament, polyester knit fabric wipes are made in the USA from virgin stock and processed on Texwipe’s hands-free Vertex® manufacturing system. They are pre-wetted to optimal levels with 70% USP-Grade IPA/30% DIW. Ideal for cleaning delicate surfaces.

Supplier: Texwipe

These FoamWipe™ wipes are made from open-cell, 100 pore-per-inch polyurethane foam.

Supplier: Texwipe

These highly sorbent wipes are made from 100% continuous filament polyester in a double-knit, 'no run' interlock pattern. The wipes are pre-wetted with 70% IPA and 30% deionised water.