Baths

Supplier: THERMO ELECTRON LED

These circulating water baths are ideal when temperature uniformity and control are particularly critical, such as when working with enzymes and in serological applications.

Sale

Supplier: NICKEL ELECTRO

Digital and analogue linear shaking water baths with a stainless steel tank housed in a durable outer case. The corrosion resistant reciprocating trolley readily accepts perforated clip trays for holding flasks and test tube racks. The trolley is easily removed for cleaning purposes and a stainless steel recessed top accommodates flasks, clip trays etc prior to and after immersion. The 28 litre baths include a drain tap for convenient emptying. Digital shakers have splash proof controls featuring an advanced PID temperature controller with a LED display, allowing observation of set and actual temperature simultaneously to 0,1 °C resolution. They also feature a highly accurate PT 100 sensor with the added advantage that it is immersed in the water for accurate temperature measurement. An over-temperature alarm operates on digital baths at 4 °C above set point which switches of the heaters to protect the users work until a safe working temperature is achieved. Analogue model has an electronic temperature controller and an electronic speed control for shaking. The heater and safety device are concealed beneath the tank allowing for easy cleaning.

Supplier: NICKEL ELECTRO

Fixed temperature baths with concentric ringed lids. The steam produced provides an effective source of heat for samples that may otherwise be thermally damaged by a naked flame. Models 1020G and 1026G are gas baths, which do not have their own electrical power source, they are designed to be heated by a hotplate or gas burner.

Supplier: NICKEL ELECTRO

Two independently controlled unstirred baths are combined in one space saving unit. A painted durable steel outer case houses two corrosion resistant stainless steel tanks, each containing a perforated tray. This digital range is ideal where two different temperatures and immersion depths are routinely required, and for incubation routines requiring minimal heat loss. The heaters are mounted on the underside of each tank giving a totally clear reservoir.

Supplier: HUBER

Unstirred water bath, Polycarbonate bath, 110A-E, Polycarbonate, Capacity: 10 L, Temperature range: ≤100 °C, Bath W×D×H: 130×490×150 mm, W×D×H: 142×505×161 mm

Supplier: Cole-Parmer

Fast heat-ups and accurate temperature control to 600 °C.

Supplier: NICKEL ELECTRO

Designed for applications that require continuous boiling. Baths have a corrosion resistant stainless steel working environment, with heater and safety cut out concealed underneath, all housed in a durable, chemical resistant, powder coated paint finished outer case.

Supplier: HUBER

Visco thermostats are mainly used with capillary viscometers or densitometers for the measurement applications. These are offers the highest temperature stability for optimal temperature distribution in the thermostat bath.

Supplier: Cole Parmer

Customisethe shaking water bath to your requirements with platforms and racks

Supplier: GESTIGKEIT HARRY

Can be universally employed as either an air, fluid or sandbath for heating many of the various receptactles in laboratory use, regardless of size or material, for temperatures ranging between 60 to 600 °C.

Supplier: THERMO ELECTRON LED

The Precision™ range of waterbaths is ideal for a wide range of applications, offers the choice of working in 'water' or 'bead' mode. Designed to work at temperatures up to 100 °C, these baths have capacities from 2 up to 28 litres**. Uniformity of temperature is the same at 37 °C, for a 5 L bath, in 'water' or 'ball' mode: ± 0,2 °C.

Supplier: NICKEL ELECTRO

General purpose stirred water baths offering good temperature stability and uniformity for consistent, repeatable results. Operation below ambient is possible using an optional refrigerated dip cooler.

Supplier: SELECTA

Double skinned AISI 310 stainless steel tank with an exterior case of AISI 304 stainless steel. The heating elements embedded in INCOLOY heat and corrosion resistant stainless steel.

Supplier: SELECTA

These metal baths are made up of double external AISI 304 stainless steel skin and an AISI 310 stainless steel pressed bath interior.

Supplier: Cole-Parmer

Corrosion resistant baths with stainless steel inners for easy cleaning.

Supplier: GLASWARENFABRIK KARL HECHT

The Thermostatic waterbath, CE certified is fully electronic wear-free temperature control with digital display. Temperature control with adjustable nominal value limit and alarm circuit.