You searched for: Evaporators

Supplier: LABCONCO

An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Supplier: LABCONCO

These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Supplier: Heidolph Instruments GmbH & Co.KG

Hei-VAP industrial - performance plus package.

Supplier: VWR Collection

This is a basic chemical laboratory instrument suitable for evaporation, distillation and separation of chemicals. It can be used as a multifunctional system in combination with a vacuum pump, vacuum controller and refrigerated circulator to provide excellent distillation solutions in many laboratory applications.

Supplier: Heidolph Instruments GmbH & Co.KG

Hei-VAP Industrial - All-round Package.

Supplier: LABCONCO

This system uses nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once.

Supplier: Heidolph Instruments GmbH & Co.KG

Hei-VAP Industrial large scale rotary evaporators for enhanced vacuum control standards and for maximum safety.

Supplier: VWR Collection

This is an essential instrument for use in chemical laboratories for efficient and gentle removal of solvents from samples by evaporation. It offers an excellent distilling solution in a wide range of applications.

Supplier: LABCONCO

This evaporator speeds evaporation of up to 50 samples at the same time using dry heat and nitrogen blow down. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination.

Supplier: LABCONCO

The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Supplier: LABCONCO

The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).

Supplier: Heidolph Instruments GmbH & Co.KG

These evaporators are equipped with proven smart details such as Easy-Clip, patented clamping sleeve, lift stop to limit immersion depth and universal 5 L heating bath.

Supplier: Heidolph Instruments GmbH & Co.KG

Large scale evaporators up to 20 L.

Supplier: Heidolph Instruments GmbH & Co.KG

Adds numerous smart features to the Hei-VAP Ultimate, as well as an overview of all parameters and the current process.

Supplier: Heidolph Instruments GmbH & Co.KG

Precise setting of rotation speed and heating bath temperature on the digital touch display or for quick access during an active process directly via the knobs on the operating panel.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Supplier: Heidolph Instruments GmbH & Co.KG

The Hei-VAP ultimate, precise setting of rotation speed and heating bath temperature on the digital touch display or for quick access during an active process directly via the knobs on the operating panel.

Supplier: Heidolph Instruments GmbH & Co.KG

Hei-VAP Expert Control rotary evaporators allow central control of all process parameters: Vacuum, cooling temperature, rotation and heating bath temperature. The units have separate knobs for quick access: Right for direct vacuum control, the left one for rotation has a lock function to prevent accidental adjustment

Supplier: Heidolph Instruments GmbH & Co.KG

Universal heating bath accommodates water or other bath fluids allowing for temperature settings up to 180 °C. Receiver cassettes protect against threat of glassware breakage.

Supplier: LABCONCO

This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Supplier: IKA

The RV 10 auto pro V-C Complete package is the complete solution for your rotary evaporator set-up. In addition to the rotary evaporator RV 10 auto, the package includes the four litres HB digital heating bath, the VACSTAR digital vacuum pump and the RC 2 lite recirculating chiller.

Supplier: IKA

Rotary evaporators with integrated heating bath, safe and simple operation via ergonomic controls situated at the front.

Supplier: IKA

These entry-level evaporators are ideal for all standard evaporation applications in universities and research laboratories. The functions of the RV10 control have been extended and improved to enable fully automatic distillation: With automatic boiling point determination, an integrated solvent library and the option to connect a speed-controlled vacuum pump.

Supplier: THERMO SAVANT

The Thermo Scientific™ Savant™ SpeedVac™ SPD210 vacuum concentrator is a large-capacity vacuum concentrator with a modular design, ideal for drying aqueous and organic solvents.

Supplier: IKA

The RV 3 rotary evaporator is the ideal entry-level model from the IKA rotary evaporator portfolio. It is suitable for a multitude of uses in the chemical, pharmaceutical, and biotechnology industries, in research and development, in manufacturing or quality assurance, in laboratories, and in plant construction. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface and is space saving.

Supplier: IKA

Rotary evaporators with integrated heating bath and vacuum controller; units feature USB interface, central display for automatic distillation and ramp programming. A motorised lift with 140 mm stroke with 'safety stop' function - if the power cuts out the evaporator flask is automatically lifted out of the heating bath.

Supplier: IKA

Rotary evaporators with integrated heating bath, features include an innovative control concept with a bright, high-contrast, TFT, colour-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards.

Supplier: DWK Life Sciences

This unit is designed for the concentration of trace amounts of analytes in an organic solvent prior to analysis.

Supplier: EPPENDORF

This ergonomic, intuitive concentrator provides quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. The coated lid provides superior chemical resistance against aggressive acids and organic solvents (e.g. TFA, DMSO).