You searched for: Electrophoresis Systems

Supplier: Agilent

CEP coated capillaries contain a permanently bonded polymer coating. This CEP coating shields the silanol functionality of the capillary surface and helps prevent sample adsorption. Additionally, EOF is nearly eliminated, making the capillary ideal for applications such as DNA separations with sieving polymer buffers.

Supplier: Agilent

These fused silica capillaries are designed to analyte mixtures are separated and the components detected via UV-Vis absorption, allowing preliminary identification based on peak elution time and UV-Vis spectra or both, when compared to a standard.

Supplier: Agilent

Agilent Technologies extended light path capillaries ('bubble' cell capillaries) can be used to improve sensitivity 3- to 5-fold over standard capillaries. With extended light path capillaries, the inner diameter is increased only at the detection window, offering the sensitivity of a wide inner diameter capillary and the low current generation of a narrow one.

Supplier: Agilent

Pre-aligned fused-silica capillaries from Agilent Technologies are designed and optimised for ease of use and reliability. All capillary ends are cut to a smooth, mirror-like finish. In addition, the polyimide outer coating is removed from the ends. These processes ensure minimal sample adsorption and help maintain sharp peak shapes. All capillaries have a pre-made detection 'window' and a built-in alignment stopper that allows rapid and precise insertion in the alignment interface.

Supplier: Agilent

PVA coated capillaries contain a permanently adsorbed layer of polyvinyl alcohol. This coating minimises hydrophobic and electrostatic solute/wall interactions and eliminates electroosmotic flow (EOF). Using a proprietary deposition process, the PVA coating is stable over a wide pHrange, even under basic conditions from 2,5 to 9,5. This stability allows the use of many common CE buffers. Because the silica surface is covered, many proteins and amines can be analysed without the peak tailing found with uncoated capillaries. In addition, since EOF is eliminated, cumbersome washing procedures are unnecessary and migration time reproducibility may be improved.

Supplier: CLEAVER SCIENTIFIC

The multiSUB midi is designed for routine horizontal gel electrophoresis. Simply with the extended width it allows more samples to be resolved per gel than the multiSUB mini, without a significant increase in buffer or gel volumes. Two tray options are available: 70×100 mm and 100×100 mm, and combs ranging from preparative up to 16 samples.

Supplier: Alpha Laboratories

A large selection of combs are available for all of our Clarit-E electrophoresis gel tanks. Selecting the right comb or combination of combs enables you to tailor the system to your precise requirements.

Supplier: CLEAVER SCIENTIFIC

The multiSUB mini is designed for low to medium numbers of samples. The small gel size maximises run economy but does not compromise versatility as two tray options are available – 70×70 mm and 70×100 mm – and combs ranging from preparative up to 16 samples. Simply by altering the gel tray or comb, this compact unit is capable of resolving up to 64 different samples, prepping 1 ml of sample or separating sample bands over a distance of 9 cm.

Supplier: CLEAVER SCIENTIFIC

By combining both functionality and ease of use, the OmniPAGE CVS10 systems provide complete flexibility for individual research needs. They can accommodate up to 4 handcast gels and 2 commercial precast gels and the sliding clamp technology within the PAGE insert facilitates fast, intuitive leak-free casting.

Supplier: CLEAVER SCIENTIFIC

The multiSUB maxi is designed for resolution of high numbers of samples, such as from cloning and PCR. Tray sizes correspond to standard blotter sizes allows easy sample transfer onto a membrane for further analysis. Two tray options are available: 200×200 mm and 200×250 mm.

Supplier: CLEAVER SCIENTIFIC

The ideal tank for standard membrane and gel cellulose acetate techniques, the cellas electrophoresis system is designed and built to high quality standards to address both routine clinical and research requirements. Two adjustable supports, which can be positioned anywhere within the tank, readily accommodate different lengths of dry cellulose acetate membrane.

Supplier: CLEAVER SCIENTIFIC

omniPAGE mini wide vertical gel unit with an active gel width of 18 cm effectively allows double the number of samples to be resolved as the omniPAGE mini unit. This allows consistency of sample comparison on a single gel and is designed for those with greater than 20 samples to compare and resolve.

Supplier: CLEAVER SCIENTIFIC

omniPAGE maxi combines convenient ease of use features with high resolution separations. Simple set up using ultra soft silicone seals guarantees trouble free glass plate loading and gel casting. Dual gaskets on the gel running insert along with notched and plain glass plates ensure leak proof gel running. Rapid set up cooling retains resolution in extended separations and also saves on buffer volume without affecting run quality. Glass plates reduce breakage and have bonded spacers for added convenience.

Supplier: CLEAVER SCIENTIFIC

Gradient mixer is ideal for caesium, sucrose and gel gradients.

Supplier: CLEAVER SCIENTIFIC

The multiSUB Choice offers a wide degree of versatility. Three tray options are available – 150×70 mm, 150×100 mm and 150×150 mm – allowing the choice of one, two or all three gel length options at the time of purchase. Maximising comb and tray options allow up to 210 samples to be resolved per gel. The 150 mm total run length allows restriction fragment or other close MW sample bands to be easily separated and identified. Speed loading is accomplished using 10-, 14-, 18-, 28- or 30-sample multi-channel pipette compatible combs. Fabricated multiSUB Choice Stretch units are available with optional 150×200 mm and 150×250 mm gel trays and four 28-sample combs for those researchers wanting to perform higher resolution separation of more samples over a longer distance. multiSUB Choice Trio includes all 3 tray sizes for optimum versatility and value.

Supplier: Roth Carl

Vertical gel electrophoresis system, Vertical dual plate electrophoresis, Maxi vertical dual plate, Standard, 285×275 mm, Capacity: 48 gels

Supplier: Roth Carl

Vertical gel electrophoresis system, Vertical dual plate electrophoresis, Mini vertical dual plate, Coolable, 200×140 mm, Capacity: 20 gels