Supplier: Thermo Fisher Scientific

Choose Thermo Scientific™ SureSTART™ 1,7 ml high recovery glass screw top microvials, performance Level 3, when you need to maximise the injection volume for <2 ml samples.

Supplier: CHROMACOL

These wide opening screw neck, crimp top and snap top vials are designed exclusively for use with the Virtuoso™ vial identification system. They are made of superior quality 33 expansion borosilicate clear Type 1, Class A.

Supplier: CHROMACOL

Level 100 EPA vials: These are processed and packaged under a strict registered ISO Quality Management System in the same manner as Level 300 products. Level 100 products are not certified or pre-cleaned. Every case of product is labelled with its production number and is custody sealed to ensure reliable chain-of-custody. These convenience kits are recommended for discrete water sampling under EPA 40 CFR 136 'Guidelines for Establishing Test Procedures for the Analysis of Pollutants" and EPA 40 CFR 141 "National Interim Primary Drinking Water Regulations: Control of Trihalomethanes in Drinking Water'.

Supplier: CHROMACOL

* Ideal for micro sampling. Should be used with S-10 (10 mm steel support spring).

Supplier: DWK Life Sciences

Screw thread micro-vials are manufactured from 33 expansion, low extractable borosilicate glass with attached closures.

Supplier: DWK Life Sciences

Vials are manufactured from 33 expansion, low extractable borosilicate glass. These glass Solvent-Saver™ vials are dimensionally smaller than conventional scintillation vials, permitting a reduction in the amount of solvent required.

Supplier: Thermo Fisher Scientific

Choose Thermo Scientific™ SureSTART™ glass snap top microvials, performance level 3, to maximise the injection volume when analysing <2 ml samples.

Supplier: MICROSOLV

These vial inserts are made from borosilicate glass.

Supplier: GLASWARENFABRIK KARL HECHT

Soda-lime glass, amber.

Supplier: DWK Life Sciences

Omni-Vial® vials are made of PP and can be used for a wide variety of lab application.

Supplier: DWK Life Sciences

These plastic autosampler vials combine thermoplastic polymer outer vial shells with type I borosilicate glass inserts.

Supplier: MACHEREY-NAGEL

Vial insert, 0,25 ml, Glass, Clear, Ø×H: 5×31 mm, Flat bottom, Non sterile, Cap included: No

Supplier: MACHEREY-NAGEL

This crimp neck vial has a usable volume of 2 ml.

Supplier: MACHEREY-NAGEL

These shell vials for HPLC analyses have the advantage of an easy handling.

Supplier: MACHEREY-NAGEL

Vial insert, 0,30 ml, Glass, Clear, Ø×H: 6×31 mm, Flat bottom, Non sterile, Cap included: No

Supplier: RATIOLAB

Vial insert, 5,00 ml, HDPE, Ø×H: 14×56 mm, Non sterile, Cap included: Yes

Supplier: DWK Life Sciences

Expansion borosilicate glass vials with attached black phenolic caps and PTFE-faced white rubber liners.

Supplier: RATIOLAB

Scintillation vials made of polyethylene (PE-LD).

Supplier: MACHEREY-NAGEL

These crimp neck vials are suitable for micro sampling.

Supplier: DWK Life Sciences

These vials are made of durable PP and can be used in standard gas and liquid chromatography autosamplers.

Supplier: EPPENDORF

CryoStorage vials for storage at −80 °C are labeled with a SafeCode barcode for safe sample identification. Different volumes are available.

Supplier: MACHEREY-NAGEL

These screw neck vials are characterized by a wide opening and a short thread.

Supplier: MACHEREY-NAGEL

Vial insert, 0,30 ml, Glass, Clear, Ø×H: 6×40 mm, Conical bottom, Non sterile, Cap included: No

Supplier: MACHEREY-NAGEL

These snap ring vials with quick, convenient sealing method can be used on all common HPLC autosamplers.

Supplier: MACHEREY-NAGEL

These screw neck vials are characterised by a small opening and 8-425 thread.

Supplier: MACHEREY-NAGEL

These vials are used for storage of liquid samples.

Supplier: STERILIN

Sterilin® Scintillation vials are ideal for use in liquid scintillation counting, beta/gamma counting and for sample storage. Vials are made of PP and caps are PE. The quarter-turn cap ensures reliable sample storage.

Supplier: DWK Life Sciences

CryoELITE® cryogenic vials are made from low binding, cryogenic grade virgin PP. They offer an unrivaled cap seal for the shipping and storage of precious biosamples. The patented cap seal exceeds DOT and IATA regulations ensuring ultimate protection of samples during transportation and demanding freeze-thaw handling.

Supplier: DWK Life Sciences

Converted from Type I borosilicate glass, amber colour.

Supplier: MACHEREY-NAGEL

These vials are used for storage of liquid samples.