You searched for: Valves

Supplier: Bohlender

Body made of PTFE with two connections with female thread UNF 1/4" 28 G. Valve made of PPS with set screw and lock nut for adjusting and fixing pressure between 0,1 and 5 bar.

Supplier: Avantor Fluid Handling

Resist pressures up to 500 psi!

Supplier: Bohlender

Body made of PTFE with 2 connections and nuts made of glass-fibre reinforced PTFE for connecting tubing or tube.

Supplier: Bohlender

Valve body made of PP with connection (thread UNF ¹/₄" 28G) suitable for b.safe Caps.

Supplier: Bohlender

Two-way valve with straight bore and two connections with GL thread completely made of PTFE.

Supplier: Avantor Fluid Handling

Nonmetallic wetted parts ideal for water and mild aqueous solutions.

Supplier: Avantor Fluid Handling

Offer outstanding potential for precision control in liquid and gas analysis.

Supplier: Avantor Fluid Handling

Excellent in applications where fast action and full bore pumping are needed.

Supplier: Avantor Fluid Handling

Pressure rating up to 1050 psi.

Supplier: Avantor Fluid Handling

Pressure rating up to 1050 psi.

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: Avantor Fluid Handling

Exceptional durability.

Supplier: Bohlender

Pressure compensation sets consisting of screw cap made of PPS for GL thread, PTFE/silicone gasket and exchangeable filtering membrane made of PTFE. Filtering membranes (2 µm) made of PTFE.

Supplier: VACUUBRAND

VM series valves are hand operated diaphragm valves. They are used as isolation valves, air-admittance valves or manual-control valves.

Supplier: VACUUBRAND

High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on the vacuum side.

Supplier: VACUUBRAND

Gas inlet valves are small hand operated valves for admitting gases into a vacuum system.

Supplier: VACUUBRAND

These valves are compact air admittance valves with small flange. The VB valve is manually operated. On rotating the knurled screw cap the valve disc is lifted off the seating and air enters through the holes. The valve disc is rotatable. Therefore the valve seat seal is prevented against wear during opening and closing.

Supplier: VACUUBRAND

These straight-through valves with electromagnetic (solenoid) drive are used for operating cycles with short intervals and it is often used as vacuum control valves. The straightforward design provides a valve with low leakage rate.

Supplier: Welch by Gardner Denver

These ball check valves have a PTFE hollow ball and viton seals.

Supplier: Welch by Gardner Denver

These fine vacuum ball valves feature a small flange made of nickle plated aluminium.

Supplier: VACUUBRAND

The VS, VS C and VS B series valves are butterfly-type valves which offers very good conductance. The VS C series features a valve seal made of perfluorelastomer material (FFKM).

Supplier: Welch by Gardner Denver

These high vacuum angle valves feature a very long life bellows-seal made from stainless steel.

Supplier: Welch by Gardner Denver

These manually operated butterfly valves are made of stainless steel with viton seal.

Supplier: Welch by Gardner Denver

Small flange valve, open type, made of nickel-plated aluminium.

Supplier: Welch by Gardner Denver

Open/close the vacuum line and easily control flow rate.

Supplier: IDEX RHEODYNE

Combine MX Series II™ modular valves with an instrument currently in use to support complex fluid switching and sample injection needs.

Supplier: Welch by Gardner Denver

Quick opening/closing via ball valve of vacuum line plus manual vacuum control.

Supplier: HAMILTON BONADUZ

HV plug valves provide an economical and flexible method of custom-building a fluid flow control system, from a simple on/off valve to a more complex multi-valve arrangement, using a combination of loop and distribution valves.

Supplier: BROEN-LAB

Thermostatic mixing valve for eye showers designed for delivering tepid water (20 to 25 °C).

Supplier: HAMILTON BONADUZ

This MTB sampling valve is a lever-actuated on/off valve used for storing and transporting samples in any Gastight® PTFE Luer lock (TLL) or Luer tip (LT) syringe.