You searched for: Tubes
Fulfill a wide and varied range of tests and procedures with the tubes available in our extensive catalogue. Tubes are made of glass or hard plastics to accommodate extreme temperatures in either direction, as well as providing superior chemical inertness and durable longevity. Disposable and reusable models exist for certain functions, with all tubes capable of holding up to the sometimes strenuous conditions placed upon them in laboratory procedures.
Eggertz tubes for comparators
Supplier: witeg Labortechnik
Eggertz tubes, 20 ml with 0,1 ml division for comparators
Expand 2 Items
Disposable round bottom culture tubes, screw cap style, bulk pack, PYREX®
Supplier: Corning
A round bottom tube without marking spot. Tubes are made of borosilicate glass and are sold without caps.
Expand 5 Items
Well plate tubes for Bond Elut Plexa PCX plates
Supplier: VARIAN
Tubes, Versaplate-Plexa PCX 60 mg
Expand 1 Items
Well plate tubes for Bond Elut Plexa plates
Supplier: VARIAN
VersaPlate™, VersaPlate well plate tubes, Plexa, 30 mg
Expand 1 Items
Well plate tubes for Bond Elut CBA plates
Supplier: VARIAN
VersaPlate well plate tubes, CBA, 100 mg
Expand 1 Items
Bond Elut alumina tubes
Supplier: VARIAN
Bond Elut Alumina is an extremely polar sorbent, with high extraction efficiency even at low bed masses. Alumina is available in acidic, basic, and neutral formats.
Expand 2 Items
Specimen tubes
Supplier: MURRAY S
Soda-lime glass. Straight sided tubes, with beaded rim and push in PE closure.
Expand 14 Items
Well plate tubes for Bond Elut Plexa PAX plates
Supplier: VARIAN
Bond Elut Plexa PAX 30 mg tubes for VersaPlate
Expand 1 Items
Well plate tubes for Bond Elut NEXUS and Bond Elut NEXUS WCX plates
Supplier: VARIAN
VersaPlate well plate tubes, NEXUS, 30 mg
Expand 3 Items
Graphite contact cylinders
Supplier: PerkinElmer
The graphite contact cylinders are engineered for a precise fit so that variations in electrical contact, which might affect the analytical performance, are reduced to a minimum.
Expand 4 Items
Well plate tubes for Bond Elut C18 OH plates
Supplier: VARIAN
VersaPlate™, VersaPlate well plate tubes, C18 OH, 100 mg
Expand 1 Items
Microtubes, 1,1 ml
Supplier: Thermo Fisher Scientific
Microtube racke system consists of 1,1 ml-tall microtubes supplied pre-racked in boxes to match a standard 96-well microplate footprint.
Expand 1 Items
Well plate tubes for Bond Elut Certify II plates
Supplier: VARIAN
VersaPlate well plate tubes, Certify II, 100 mg
Expand 1 Items
Bond Elut Diol (2OH) tubes
Supplier: VARIAN
Bond Elut diol (2OH) resembles unbonded silica in its tendency for strong hydrogen bonding with analytes, but can also be employed in the non-polar mode.
Expand 1 Items
NMR sample tube washer
Supplier: witeg Labortechnik
Complete with 2 PTFE-adapters to fir 5 cuvets or NMR tubes of 5 and 10 mm diameter in different lengths. Vacuum operated washers allowing the individual washing of 1 to 5 tube, complete with caps and FEPcappilaries (box 1 pce.).
Expand 2 Items
Centrifuge Tubes with Conical Bottom
Supplier: witeg Labortechnik
Centrifuge Tubes with Conical Bottom
Expand 2 Items
Drying tubes, bend
Supplier: witeg Labortechnik
Borosilicate glass 3.3. Angled at 75° with ground joint cone.
Expand 2 Items
Centrifuge tubes, conical bottom
Supplier: SciLabware
Tubes, manufactured from chemically inert Pyrex® glass for contamination-free performance.
Expand 1 Items
Dreyers agglutination tubes
Supplier: MURRAY S
Neutral resistance glass with funnel top.
Expand 2 Items
Test tubes with rim, medium wall
Supplier: SciLabware
PYREX®, borosilicate glass.
Expand 10 Items
Centrifuge tubes, pear shape, ASTM, PYREX®
Supplier: SciLabware
Centrifuge tube is used for the determination of water and sediment in petroleum products.
Expand 1 Items
Test tubes without rim, Durham
Supplier: MURRAY S
Soda-lime glass test tubes are suitable for general mixing and simple laboratory work, and will withstand moderate warming (water bath). They should not be placed directly into naked flames.
Expand 7 Items
Test tubes with rim, light wall
Supplier: MURRAY S
Soda-lime glass test tubes are suitable for general mixing and simple laboratory work, and will withstand moderate warming (water bath).
Expand 11 Items
Test tubes, with rim, heavy wall
Supplier: MURRAY S
Borosilicate test tubes are suitable for all usual laboratory applications. They will withstand temperature change up to and including boiling of samples. They are also highly chemically resistant.
Expand 7 Items
Centrifuge tubes
Supplier: MURRAY S
Glass, non-graduated, round bottom, without rim, without cap.
Expand 1 Items
Test tubes, PS, with screw caps
Supplier: witeg Labortechnik
PS, clear, with screw cap.
Expand 1 Items
Test tubes, with rim, medium wall
Supplier: MURRAY S
Borosilicate test tubes are suitable for all usual laboratory applications. They will withstand temperature change up to and including boiling of samples. They are also highly chemically resistant.
Expand 9 Items
Test tubes without rim, heavy wall
Supplier: SciLabware
PYREX®, borosilicate glass.
Expand 11 Items
Centrifuge tubes, conical, ASTM
Supplier: SciLabware
PYREX®, borosilicate glass.
Expand 1 Items
PPL Tubes, Bond Elut™
Supplier: VARIAN
Bond Elut PPL (Priority PolLutant) is a modified styrene-divinylbenzene polymer that retains polar analytes, including phenols, for excellent absolute recoveries.