Supplier: Avantor Fluid Handling

Ensure a tight seal in your sanitary fluid line.

Supplier: Cytiva (Formerly Pall Lab)

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Cap mat for incubation, Cap mat for incubation

Supplier: Avantor

Suitable to use with J.T.Baker® Plate Round Well 43001-0010, 43001-0016 or 43001-0116.

Supplier: VWR Collection

These films are 240 µm thick white vinyl with adhesive, for use with white microplates. Light reflective properties of the film, when used to seal clear bottom plates, maximise the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. White films have also been used as a backing matrix for microscopy of punch-out samples from filter plates.

Supplier: VWR Collection

Easier to apply and remove as compared to standard moulded PCR strip caps.

Supplier: Thermo Fisher Scientific

These heat-shrink bands can be used to ensure the integrity of bottle contents. Simply apply the recommended application torque for Thermo Scientific Nalgene® closures and slide the heat-shrink band over the closure and bottle neck. Heat the band to shrink and secure contents with a tamper-resistant seal.

Supplier: Avantor Fluid Handling

Ensure a better process seal with outstanding chemical resistance.

Supplier: VWR Collection

Polyester film, acrylic adhesive. These 49,5 µm thick polyester films minimise evaporation and prevent spillage and contamination between wells.

Supplier: Thermo Fisher Scientific

Effective sealing of all microplate formats. For storage, PCR, microscopy, culture and protection.

Supplier: Lenz Laborglas GmbH & CO.KG

PTFE, white.

Supplier: Lenz Laborglas GmbH & CO.KG

Silicone rubber sealing rings with PTFE washers.

Supplier: Thermo Fisher Scientific

VersiCap™ mats are designed to seal VersiPlate 96-well PCR strip tubes, but can be used will all Thermo Scientific strip tubes and 96-well plates.

Supplier: Thermo Fisher Scientific

Clear polyester film, aluminium foil. Recommended for use in PCR in conjunction with a thermal cycler that has a screw-down or clip-down lid.

Supplier: Thermo Fisher Scientific

Round or square capped mats for sealing 96-well storage plates.

Supplier: VWR Collection

With a polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy piercing sealing film allows direct sample recovery with single- or multi-channel pipettes and robotic probes.

Supplier: VWR Collection

Polyester 2×8 strip films are identical to polyester films in material and adhesive, but designed for sealing only one or two 8-well rows at a time on either strip-well plates or standard plates whenever rows must be selectively protected or accessed. Sterile product is packed in tamper-evident bags of 50/bag.

Supplier: VWR Collection

VWR®, PCR tubes, Cap strip, Single sheet/mat/strip, Optically clear 8-cap strips for Real-Time PCR plates, PP

Supplier: Thermo Fisher Scientific

These flat cap strips provide an extremely tight seal in UTW (ultra-thin walled) PCR plates. They are an ideal choice for low volume reactions where it is important to minimize vapor loss.

Supplier: THERMO MATRIX TECHNOLOGIES

Matrix CapMats and CapStrips are engineered to maintain a strong seal at all times on tubes, microplates, and deepwell blocks. CapMats effectively seal down to –80 °C, while cap strips give the flexibility to seal individual caps or rows.

Supplier: 3M

Gel ear cushions for use on a wide variety of 3M™ PELTOR™ Headsets. These gel sealing rings features a super-thin polyurethane skin with a double-hump top face design and a silicon gel-filled bladder with a Confor™ foam backing.

Supplier: Thermo Fisher Scientific

Sealing gaskets, For: 83B

Supplier: THERMO MATRIX TECHNOLOGIES

Strips of eight caps for sealing storage plates and racked cluster tubes. The strips are compatible with Thermo Scientific microplates, 0,8 ml storage plates, 1,2 ml round well storage plates and 1,2 ml cluster tubes ranges.

Supplier: Lenz Laborglas GmbH & CO.KG

Silicone or Silicone PTFE-coated.

Supplier: VWR Collection

These heat resistant 74,9 µm thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications, where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For real-time PCR applications, where maximum optical clarity is required, use optically-clear polyester films.

Supplier: Thermo Fisher Scientific

Clear, 24-well format Piko® PCR/qPCR film seal allows high transmission of fluorescence across the range of commonly used fluorophores. When used with a Piko® thermal cycler or PikoReal® Real-Time PCR system, sample volumes as low as 5 µl can be used with minimal evaporative loss.

Supplier: HEATHROW

Parafilm® M is a semi-transparent, flexible, thermoplastic film with two-way stretch. This odourless and colourless film provides a tight, moisture-proof seal.

Supplier: VWR Collection

These films are 240 µm thick black vinyl with adhesive for use with 96-well, 384-well and 1536-well black microplates. They fit within the edges of raised rim plates and may be applied to either the plate top or bottom. The light blocking and absorbing properties of these films make them ideal for reducing stray light and crosstalk in fluorescence applications and for protecting light-sensitive samples in storage.

Supplier: CPC COLDER

O-Ring with Silicone, platinum-cured sealing options.

Supplier: THERMO MATRIX TECHNOLOGIES

Individual storage plate caps are designed for sealing storage plates and cluster tubes.

Supplier: Avantor Fluid Handling

Ensure a tight seal.