You searched for: Retort Stands
Retort stands to hold burettes, flasks, and other labware during procedures are available at Avantor. Sets include both stainless steel rod and base, constructed of your choice of plastic or cast iron. A polypropylene retort stand is offered for severe corrosive conditions. Bases of cast iron coated with enamel are featured in rectangular, tripod, U-shaped and A-shaped options. Different rod lengths for the support of different diameters of labware are also supplied through Avantor, as well as retort rings and clamps.
Retort stands
Supplier: USBECK Laborgeräte
Stainless steel. Can be used for a wide range of equipment, e.g. stirrers, hotplates etc.
Expand 2 Items
Tripod stands
Supplier: USBECK Laborgeräte
Retort stand base in tripod shape made from powder-coated steel.
Expand 2 Items
Stands for SCOTTY® cylinders
Supplier: Merck
These stands ensure that your cylinder will be stable on a benchtop or other flat surface.
Expand 1 Items
Retort stand, Azlon®
Supplier: SciLabware
Weighted retort stand made from white PE.
Expand 1 Items
VWR®, Curved Base Stand
Supplier: VWR Collection
PU coated cast iron stand, high grade steel rod 500×12 mm.
Expand 1 Items
VWR® Stand with Holder for Funnels
Supplier: VWR Collection
PU coated, cast iron stand (200×450 mm), steel rod (500×12 mm), bosshead and holder for four funnels.
Expand 1 Items
Stand for b.safe canister, S50
Supplier: Bohlender
Space saving stainless steel stand for two S50 canisters.
Expand 1 Items
VWR® Stand with Holder for Separating Funnels
Supplier: VWR Collection
PU coated cast iron stand 200×450 mm, steel rod 500×12 mm, bosshead and holder for two funnels.
Expand 1 Items
Drum holder for placing filling containers, V2A
Supplier: BURKLE
The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. This prevents the danger of the liquid splashing while being poured from a high height – for example if the filling container is standing on the floor.
Expand 1 Items
VWR®, Large H Stands (B)
Supplier: VWR Collection
H-shaped stands with nickel-coated steel rod and 420×400 mm grey marbled cast iron baseplate.
Expand 2 Items
Base with clamps, flexible
Supplier: USBECK Laborgeräte
Foot made of die-cast zinc with flexible 300 mm long three-finger clamp, nickel plated brass.
Expand 1 Items
VWR®, Levelling Platform with Bubble Level
Supplier: VWR Collection
The use of levelling platforms in electrophoresis can be a big help in maintaining a uniform gel thickness and therefore a uniform and quality sample separation.
Expand 2 Items
VWR®, Support Stand, Rectangular Base, Cast Iron
Supplier: VWR Collection
Cast iron support stand bases are constructed with black enamel finish for chemical resistance and durability.
Expand 1 Items
VWR®, Laboratory Stands
Supplier: VWR Collection
Tripod stands (A): Cast iron tripod stand, painted with hammer finish, steel support rod, nickel plated.
Expand 9 Items
Stand plates
Supplier: USBECK Laborgeräte
Steel, powder coated. Firm, non slip stand. For a wide variety of uses. With M10 threaded hole on face side.
Expand 5 Items
Clamp base, flexible
Supplier: USBECK Laborgeräte
Zinc die-casting and brass, nickel plated.
Expand 1 Items
Stand bases, tripod
Supplier: USBECK Laborgeräte
Powder-coated steel, thickness 10 mm.
Expand 2 Items
Plastic bases and safety rings for measuring cylinders
Supplier: HIRSCHMANN
Stand, retort, Base and safety ring for 500 ml measuring cylinders
Expand 7 Items
Stand for burettes
Supplier: Brand
PP (baseplate) and stainless steel (support rod).
Expand 1 Items
Retort stands, with M10 thread
Supplier: RSG
Retort stand bases made of stainless steel (Remanit 4301). With off-centre M10 thread.
Expand 2 Items
Retort stand bases, with M10 thread
Supplier: RSG
Retort stand bases made of stainless steel (Remanit 4301). With off-centre M10 thread and four adjustable feet.
Expand 6 Items
VWR® Labomeca®, Feet for rods
Supplier: VWR Collection
Mounting brackets for Labomeca® assemblies.
Expand 2 Items
Stands, with or without glass ceramic plate
Supplier: USBECK Laborgeräte
These stainless steel stands with four feet are available with or without glass ceramic plate. They have the optimum height for use with Usbeck laboratory burners.
Expand 9 Items
Base frames
Supplier: BOCHEM
These tube base frames made from stainless steel 18/10 are available in "V" and "H" shape.
Expand 2 Items
Roller Bar Platforms for VWR® Standard and Advanced Shakers
Supplier: VWR Collection
Glassware platforms with four clamping bars and rubber mat.
Expand 2 Items
Retort stand, SP Bel-Art
Supplier: Bel-Art Products, a Part of SP
PP base, stainless steel mounting rod. This non corrosive, molded support stand is an excellent alternative to metal stands.
Expand 1 Items
Foot for rods, 60 mm
Supplier: BOCHEM
Foot for rods, made from stainless steel 18/10. With anti-slip rubber protection.
Expand 1 Items
Stand bases
Supplier: BOCHEM
Stand bases made of stainless steel 18/10 with expanded, flat and heavy feet for stability.
Expand 4 Items
: Integra
: EPPENDORF
: OZ BIOSCIENCES
: VWR Collection
: SenseAnywhere
: NANOENTEK
: VWR Collection
: Sartorius
: Quantabio