Disinfectants

Supplier: SCHUELKE MAYR

A two component formulation that generates active oxygen for cleaning and disinfection of surfaces and medical devices. Applications include targeted wiping disinfection and cleaning e.g. in the case of an outbreak.

Supplier: SCHUELKE MAYR

Liquid concentrate based on quaternary ammonium, aromatic alcohols, non ionic surfactants and amphoteric glycine derivative suitable for surface cleaning and disinfection.

Supplier: SCHUELKE MAYR

Alcohol-based, rapid disinfection of non-invasive medical devices and surfaces.

Supplier: ECOLAB CONTAMINATION CONTROL

Klercide™ Sporicidal Active Chlorine is an effective sporicide based on active chlorine, derived from a sterile sodium hypochlorite solution. The ready to use version is 0,2 µm filtered, filled and double bagged in a Grade C cleanroom before gamma irradiation to a validated procedure.

Supplier: VELTEK ASSOCIATES

DEC-SPORE 200 Plus is a sterilant-virucide-disinfectant-sanitizer. A peracetic acid hydrogen peroxide solution that is processed to comply with the standards required by pharmaceutical, biotechnology, medical device, and health care industries.

Supplier: ECOLAB CONTAMINATION CONTROL

Klercide Low Residue Quat Blended with WFI version is a solution with water for injection (WFI) and the pack is triple bagged. Low endotoxin levels are guaranteed.

Supplier: ECOLAB CONTAMINATION CONTROL

Sterile WFI and deionised water are supplied cleanroom processed, 0,2 µm filtered, double bagged and terminally sterilised by gamma irradiation. Suitable for the dilution of sterile biocide concentrates or the removal of residues.

Supplier: TRISTEL SOLUTIONS

A rotational liquid disinfectant containing surface active agents and a blend of quaternary ammonium compounds (QAC) and biguanide for environmental and surface disinfection.

Supplier: VELTEK ASSOCIATES

HYPO-CHLOR® Neutral Products are a ready-to-use and neutralized 0,52% and 0,25% sodium hypochlorite solutions formulated with Water for Injection (WFI).

Supplier: ECOLAB CONTAMINATION CONTROL

Contains 70% IPA or denatured ethanol (IMS) blended with deionised water, filtered to 0,2 µm, filled and double bagged in an ISO Class 7; Grade C (microbial count) cleanroom before irradiation using a validated process at no less than 25 kGy to ensure spore free alcohol.

Supplier: TRISTEL SOLUTIONS

A non foaming, chlorine based, alkaline sanitiser.

Supplier: ECOLAB CONTAMINATION CONTROL

Suitable for ISO Class 5, Grade A and B (microbial count) areas: cleanroom processed and sterile, double bagged. Blend of 6% hydrogen peroxide and deionised water, with broad spectrum activity including bacterial spores. Filtered to 0,2 µm.

Supplier: ECOLAB CONTAMINATION CONTROL

Contains 70% IPA or denatured ethanol (IMS) blended with highest specification (EP) water for injection. It is filtered to 0,2 µm, filled and triple bagged under ISO Class 5; Grade B (microbial count) laminar flow in an ISO Class 7; Grade C (microbial count) cleanroom before irradiation using a validated process at no less than 25 kGy to ensure spore free alcohol.

Supplier: STERIS

Ready-To-Use ETO sterilants for sterilisation and disinfection of environmental, hard non-porous surfaces.

Supplier: STERIS

Spor-Klenz® Ready-To-Use Sterilants are fast acting, liquid sporicides specifically formulated for sterilization and disinfection of environmental, hard non-porous surfaces. Sterilants contain the proven blend of peracetic acid, hydrogen peroxide and acetic acid, that provides fast, effective microbial control of challenging spores such as Bacillus subtilis and Bacillus cereus and fungi like Aspergillus brasiliensis.

Supplier: ECOLAB CONTAMINATION CONTROL

70% denatured ethanol, 30% deionised water solution, 0,2 µm filtered.