You searched for: Lubricants

Supplier: EDWARDS HIGH VACUUM METTLER

A range of Apiezon® greases is offered for use on high vacuum systems and for many general applications in the laboratory. These high purity greases are non-toxic, are easy to apply and clean off and have long shelf lives.

Supplier: EDWARDS HIGH VACUUM METTLER

Fomblin® perfluoropolyether oil for use in oil sealed rotary vacuum pumps and are practically a direct replacement for mineral oil in terms of viscosity and vapour pressure. Also it contains Drynert fluid which contains anti-rust and anti-wear additives soluble in Fomblin®. These additives cover metallic surfaces with a protective, corrosion resistant film.

Supplier: EDWARDS HIGH VACUUM METTLER

ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.

Supplier: EDWARDS HIGH VACUUM METTLER

Gas Ballast Oil Return Kit:
Returns oil continuously to the gas ballast of the pump. The kit mechanism allows 80% fresh air to mix with 20% of returning oil, giving a gas ballast effect equivalent to gas ballast 2.

Supplier: EDWARDS HIGH VACUUM METTLER

A high vacuum grade grease, which is for use at system pressures lower than 10⁻⁶ mbar.

Supplier: GREEFF RW SILICONES LUBRICAN

Air-curing dry film lubricant in solvent.

Supplier: GREEFF RW SILICONES LUBRICAN

Molykote 111 is a valve lubricant and sealant with good resistance to most chemicals and a wide service temperature range.

Supplier: Roth Carl

Assortment of 2 × each tube containing low viscosity, medium viscosity and high viscosity silicone paste.