You searched for: Presaturated Cleanroom Wipes

Supplier: VWR Collection

These non woven wipes, made from 45% polyester and 55% cellulose, are designed for cleaning laminar flow benches, cleanroom surfaces and general process equipment. The wipe is pre-saturated with semiconductor grade solvent (70% IPA/30% DIW) for safe storage, mixing and dispensing.

Supplier: CONTEC

100% nonwoven polyester wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

These low endotoxin wipes are made from 100% knitted polyester and pre-saturated with a blend of 70% USP-Grade IPA and 30% water for injection (WFI).

Supplier: CONTEC

Presaturated with IPA/DI water.

Supplier: CONTEC

Presaturated wipes can offer many benefits over bottled alcohol and dry wipes for cleanroom use. Contec’s sterile SATWIPES Theta with 70% denatured ethanol consist of a perforated roll of presaturated wipes which are dispensed through a convenient centre pull canister.

Supplier: CONTEC

This non woven, meltblown PP wipe is pre-saturated with 91% isopropanol and 9% deionised water.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes, providing a sustainability story in a single-use world.

Supplier: CONTEC

Slide 'n seal bag is a resealable bag that allows easy dispensing of PROSAT® polywipe-C pre-saturated wipes. The plastic piece glides across the top of the bag ensuring a tight seal every time the bag is closed. No adhesives are used to keep the bag closed.

Supplier: CONTEC

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester presaturated with IPA and DI water.

Supplier: CONTEC

These PROSAT® polynit heatseal wipes are presaturated with 10% semi-grade IPA/90% DI water.

Supplier: CONTEC

Pre-saturated knitted polyester wipes made with Polynit Heatseal material. The wipes are pre-saturated with 70% IPA and 30% DI Water. They are therefore ideal for cleanroom applications, surface preparation and critical manufacturing processes.

Supplier: CONTEC

Hydroentangled split microfibre wipes pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Meltblown polypropylene wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

These wipes consist of 50% polyester and 50% rayon (non woven) that is hydraulically entangled creating a soft, durable, and clean wipe. The saturation of 70% alcohol and 30% deionized water provides a safe and mild cleaning solution.

Supplier: CONTEC

Contec HydroPure is a blend of 6% hydrogen peroxide and purified water. Contec HydroPure is BPR authorised at EU level and efficacious against bacteria, fungi, moulds, and yeasts.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

These non woven PP wipes are saturated with 70% denatured ethyl alcohol and 30% deionised water.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water

Supplier: CONTEC

Presaturated with 70% USP grade IPA and 30% DI water.

Supplier: CONTEC

These PROSAT® Sterile™ Theta™ wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

These meltblown PP wipes are saturated with a 70% isopropyl alcohol/30% deionised water blend and are sterilised by gamma irradiation.

Supplier: CONTEC

These non woven wipes are made from meltblown polypropylene pre-saturated with 70% semiconductor grade isopropanol and 30% deionised water.

Supplier: CONTEC

These wipes are made of 100% knitted polyester pre-saturated with 100% semiconductor grade Isopropyl Alcohol (IPA).

Supplier: CONTEC

These heat seal wipes are made from filament polyester that is laser cut to bond the fibres at the edges of the wipes. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. The wipes are saturated with 70% USP grade IPA, 30% DI water.

Supplier: CONTEC

These PROSAT® Sterile wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% denatured ethanol and 30% purified water.

Supplier: CONTEC

Non woven wipes pre-saturated with acetone or isopropanol.

Supplier: CONTEC

The melt blown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments.

Supplier: CONTEC

This wipe is made from filament polyester that is laser cut to bond the fibres at the edges of the wipe. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. Pre-saturated with 5% semi grade IPA and 95% DIW.