You searched for: Environmental Test Kits

Supplier: WTW

A wide choice of tests is available, for routine quantitative analysis in different applications, designed for use with WTW spectrophotometers and photometers. The test is automatically recognised by the laboratory instruments (via a barcoding system) and results are displayed in the appropriate units. Due to the different photometer optics, one test may yield different measuring ranges in different instruments; LED photometers may have smaller measuring ranges for the same test.

Supplier: WTW

Chemicals Alyza IQ PO4.

Supplier: Lovibond

The Silt Density Index (SDI) is a measure of the solids or particulate content of water and is of specific importance when commissioning reverse osmosis plant.

Supplier: NPS

Strips simultaneously test for acid/base, oxidiser, fluoride, petroleum product/organic solvent, and iodine/bromine/chlorine risks.

Supplier: Palintest

The Chlorometer Duo range of photometers are portable handheld instruments ideal for dual range chlorine analysis for routine water monitoring and other applications. It is used to test the potability of drinking water either by DPA method or by measuring higher levels of chlorine concentration in the water samples.

Supplier: Palintest

Test kit, Total Phosphorus, 0 - 12 mg/L P

Supplier: Hanna

Test kit, Ammonia high range, Range: 0,0 - 50,0 mg/l

Supplier: Lovibond

Test kit, Sulphate tablet, Range: 5 - 100 mg/l SO₄, For unit: MD600, MD610, MultiDirect and Spectrodirect

Supplier: Palintest

Comparator tablet reagents are designed for use with the contour comparator, standard comparator and other visual test platforms.

Supplier: CHEMetrics

Test kits for boiler waters and applications requiring trace levels of D.O.

Supplier: Lovibond

Test kit, Hydrogen peroxide LR tablet, Range: 0,01 - 3 mg/l, For unit: MD600, MultiDirect and Spectrodirect

Supplier: Lovibond

Indicator for pH range 5,2 to 6,8.

Supplier: Lovibond

Test kit, Copper/Zinc LR tablet, Range: 0,05 - 4 mg/l

Supplier: EUTECH

Test kit, Free chlorine (DPD) reagent kit, For unit: C401

Supplier: Thermo Orion

Orion™ AQUAfast™ Auto-Test Ampoule Reagents can be used with the Orion™ AQUAfast™ AQ4000 colorimeter to simplify sample preparation and tests.

Supplier: Thermo Orion

Two-step direct measurement of total alkalinity and pH using a pH electrode.

Supplier: Thermo Orion

Orion™ AQUAfast tablet reagents perform colorimetric measurements of common water parameters with convenient, rapidly dissolving tablets.

Supplier: Lovibond

Test kit, PHMB photometer tablet, Range: 2 - 60 mg/l PHMB, For unit: MD600, MD610

Supplier: Heyl GmbH & Co, Gebr.

Test kit, Water hardness reagent, Testomat®, 500 ml, Range: 4,48  -  44,8 mg/l CaCO₃

Supplier: Lovibond

Indicator for pH range 6,0 to 7,6.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Palintest

Photometer tablet reagents are ideal format for the testing of drinking water, natural water, wastewater and other process applications.

Supplier: CHEMetrics

Hydrogen Peroxide CHEMets® used to to monitor sterilisation solutions in the packaging and sanitising processes. Hydrogen peroxide is a strong oxidising agent used for treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging.

Supplier: Lovibond

MD 600 photometer is for precise and accurate measurements with a small footprint.

Supplier: Thermo Orion

Kit provides fast, accurate pH results in high purity and low ionic strength waters.

Supplier: Lovibond

Test kit, DPD Glycine tablet (for CI separation), Range: 0,01 - 0,2 mg/l ClO₂, For unit: MD100, MD600 MultiDirect and Spectrodirect

Supplier: Thermo Orion

Orion™ AQUAfast Powder Pack reagents perform colorimetric measurements of common water parameters with powders that dissolve quickly and mix easily.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Palintest

Aluminium reacts with Eriochrome Cyanine R indicator in slightly acid solution to produce a pink-red coloured complex.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.