You searched for: Fittings and Connectors

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, UH-427 VHP tee for 1/16" OD tubing, 10-32 coned threads, 0,50 mm thru-hole, 0,57 µl swept volume, stainless steel, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: UPCHURCH SCIENTIFIC

PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.

Supplier: VICI JOUR RESEARCH

VICI Stainless Steel Unions are made for joining two pieces of ¹/₁₆" Ø tubing, or an ¹/₈" tube. They are precision machined with a focus on the concentricity of the bore as well as on the finish of the surfaces to give an absolute leak-free connection. These Unions have internal threads, which we recommend for most applications. Internal threads make stronger connections and internal fitting details provide the lowest dead volume for high performance instrumentation.

Supplier: RADIONICS

RS Pro, stainless steel threaded fittings, are suitable for applications requiring a secure and reliable pipe connection. Heavily used within the plumbing industry, water and gas will flow through in a tightly sealed construction. These fittings are made from a durable 316 stainless steel and incorporate a hexagon nipple to ensure a simple and secure connection for pipe and hose work. All models are highly reliable and excellent quality.

Supplier: OMNIFIT

Connector, 1/16" (1.6 mm) pipe

Supplier: SEMADENI

Connectors for easy installation on any plastic containers by means of counter screw.

Supplier: SEMADENI

PP, natural

Supplier: SEMADENI

Made of PP.

Supplier: Thermo Fisher Scientific

Use these connector kits, sleeves, and tees with EASY-Column™ capillary columns.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing cross, stainless steel, 130 mm, DN 40/25, Stainless steel

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1592 Adapter, 1-16 female to 1-8 flat-bottom, female, 1 mm thru-hole, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, C-235, nut, stainless steel, 1/4-28 coned port, for 1/8" OD tubing, 4500 psi, Stainless steel

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Quick-connect coupling and plug connection, made of acetal (POM) for a complete connection.

Supplier: UPCHURCH SCIENTIFIC

Made of stainless steel or PEEK.

Supplier: VICI JOUR RESEARCH

Peek one-piece hex-head fittings, with their integrated ferrule, are easy to use with the valve-tool and the colour-it colour-coded finger-tight adapters. PEEK one-piece hex-head fittings are available in short and long versions.

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: UPCHURCH SCIENTIFIC

PEEK Zero Dead Volume unions: Zero Dead Volume (ZDV) unions come complete with two F-300 fingertight fittings for ¹/₁₆" Ext.Ø tubing and are pressure rated to 5000 psi (344 bar).

Supplier: WATERS

Replacement frit assembly - 2 µm

Supplier: MARKET SOURCE PART PROCESS

Manufactured from 316L pharmaceutical grade stainless steel, Pharma Hygiene Products’ concentric reducers provide the perfect solution for connecting existing Tri-Clamp connections to newer or changing ones.

Supplier: MARKET SOURCE PART PROCESS

Manufactured from 316L pharmaceutical grade stainless steel, Pharma Hygiene Products’ Tri-Clamp Blank Caps are designed to blank off Ferrule Ends, when used with Tri-Clamp gaskets and clamps.

Supplier: Roth Carl

Tubing connectors made of PBT with EPDM flat seal. Ideal for fast, safe and leakproof connections of tubing to glass hose connectors and glass threads.