You searched for: Vials

Supplier: VWR Collection

These general-purpose vials with screw cap are made from borosilicate glass. They are available in either a short form or capsule style. The cap on the vial is the same diameter as the body, fitting flush to the shoulder.

Supplier: METROHM

General use vial, 6,00 ml, Glass, Clear, Ø×H: 22×38 mm, Non sterile, Cap included: No

Supplier: MURRAY S

These vials without closure are made from neutral glass.

Supplier: PerkinElmer

This screw top waste and wash vial is manufactured from type I borosilicate glass.

Supplier: STERILIN

Vial insert, 6,00 ml, PP, Ø×H: 14,5×58 mm, Flat bottom, Non sterile, Cap included: Yes

Supplier: MURRAY S

Vials made from neutral glass with PE plug stoppers. Suitable for a wide variety of uses in the laboratory, production, more.

Supplier: SEMADENI

These scintillation vials are made of high quality material and good solvent resistance with good stability.

Supplier: VWR Collection

Type I clear borosilicate glass vials are for use in various analyses and in specimen, extract and standards storage. They are prepared in a solvent-free facility to prevent possible volatile contamination. Vials are available with PP solid-top or open-top caps. Solid-top caps feature fluoropolymer resin liners. Open-top caps feature ultrasonically bonded 3,1 mm fluoropolymer resin/silicone septa and are for volatile organic analyses.

Supplier: BIOCISION

TruCool® leak-proof cryogenic vials feature a screw cap with a thermally-fused gasket to ensure a tight seal. The gasket is a co-molded thermoplastic elastomer (TPE) layer, which prevents leaking, slipping and risk of contamination. The gasket is 95 kPa certified to provide a leak-proof seal. These vials are sterile and individually barcoded with a unique identifier which can be read with common barcode readers. Ideal for use in CoolRack® CF cryogenic vial modules and CoolCell® alcohol-free cell freezing containers. Recommended for use in vapor phase LN₂ only.

Supplier: DELTALAB

Tubes and caps made of autoclavable PP. Designed for the storage of biological material at temperatures as low as –196 °C (only in the gas state if stored in liquid nitrogen).

Supplier: WATERS

Chromatography vial, Screw neck, external thread, 2,00 ml, Glass, Clear, Ø×H: 12×32 mm, Non sterile, Cap included: Yes

Supplier: WATERS

Vial insert, 0,15 ml, Glass, Ø×H: 8×40 mm, Non sterile, Cap included: No

Supplier: WATERS

Vial insert, 0,30 ml, Glass, Conical bottom, Non sterile, Cap included: No

Supplier: SARSTEDT

Sample vials for Coulter Counter with enclosed caps. Vials are made from PS, caps from LDPE.

Supplier: SARSTEDT

These sample vials are made from HDPE.

Supplier: WATERS

General use vial, Snap neck, 1,00 ml, Borosilicate glass, Clear, Ø×H: 8×40 mm, Non sterile, Cap included: Yes