You searched for: Disposable Garments

Supplier: Ansell

The critical areas to the front of the garment (including the hood, arms and legs) are made from the MICROGARD® 2000 STANDARD fabric (PE laminate with non woven inner layer), offering a high level of liquid and particle protection with a low level of water vapour resistance. The back panel is made from breathable MICROGARD® 1500 PLUS fabric (SMS) which is air and water vapour permeable.

Supplier: KIMBERLY CLARK

Kimtech™ A5 sterile cleanroom apparel with CLEAN-DON™ technology is made of SMS (Spunbond Melt-blown Spunbond) material. It features built-in snaps that gather up legs and arms to aid aseptic gowning. Garments have a thumb loop that prevents the sleeve from rolling back and exposing arm or wrist when in use.

Supplier: 3M

These disposable overalls are made of lightweight, breathable PP with flame resistance. Designed to be worn over primary FR garments, they provide protection against dusts and light liquid splashes.

Supplier: 3M

These disposable overalls are made of a laminated microporous material consisting of polyethylene and polyester. The garments provide an excellent barrier against hazardous dusts (type 5) and certain light liquid splashes (type 6). Certified to also protect against radioactive particles and biological agents and reduce build up of static charge.

Supplier: LAKELAND CLEANMAX APPAREL

Cleanroom garments are constructed and packaged to offer premium protection for your cleanroom and controlled environments.

Supplier: HONEYWELL SAFETY

Anti-static properties inside and out allow this garment to be worn even for activities subject to very stringent requirements (cleanroom production, micro-electronics, hygiene measures). The fleece with its special membrane makes the overall extremely water-repellent.

Supplier: VWR Collection

Disposable non-woven hood is made of 20 gsm SPP fabric, and features a small open face hole.

Supplier: VWR Collection

Sweat absorbing, user-friendly, disposable, and hygienic solution.

Supplier: VWR Collection

VWR® Basic SPP frocks are manufactured from a strong, lightweight and breathable, spunbonded polypropylene (SPP) fabric, which protects against dirt, grime and certain dry particulates in non hazardous environments.

Supplier: VWR Collection

Disposable, anti-static overall made of a microporous film, with a nylon scrim between film and substrate, that gives the material additional strength.

Supplier: VWR Collection

Fluid-impervious lab coats are the cleanest and most durable within the entire VWR® Protection line of apparel.

Supplier: VWR Collection

These poypropylene head and face covers are designed to protect users from potential environmental contaminations.

Supplier: VWR Collection

VWR® Basic SPP beard covers are manufactured from a strong, lightweight and breathable, spunbonded polypropylene (SPP) fabric, which protects against dirt, grime, and certain dry particulates, in non hazardous environments.

Supplier: DuPont

These caps are made of Tyvek® which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash.

Supplier: DuPont

These hooded overalls are made of Easysafe fabric, an optimised non woven PE fabric from DuPont. It is softer and with a more open structure than Tyvek®. It is therefore less protective than Tyvek® (L1431N), but offers adequate Type 5 and 6 barrier protection and remains both air and moisture vapour permeable.

Supplier: VWR Collection

VWR® Basic SPP overalls are manufactured from a strong, lightweight and breathable, spunbonded polypropylene (SPP) fabric, which protects against dirt, grime, and certain dry particulates, in non hazardous environments.

Supplier: VWR Collection

VWR® Basic bouffant caps are manufactured from a strong, lightweight and breathable, spunbonded polypropylene (SPP) fabric, which protects against dirt, grime, and certain dry particulates, in non hazardous environments.

Supplier: DuPont

Air-Fed coverall with attached non-dssipative undergloves and integrated dissipative socks.

Supplier: VWR Collection

VWR® Basic SPP lab coats are manufactured from a strong, lightweight and breathable spunbonded polypropylene (SPP) fabric, which protects against dirt, grime, and certain dry particulates in non hazardous environments.

Supplier: DuPont

ProShield® Proper overalls are made of a proprietary DuPont non woven PE fabric (55 g/m²) that makes them incredibly tough, lightweight and resistant to tears and punctures.

Supplier: DuPont

DuPont™ Tychem® 6000 F Apron model PA30L0. Shin-length apron with neck and waist ties. Available in grey and in one size.

Supplier: DuPont

Shin-length gown with wrap-over rear closure, hook and loop neck closure, and waist ties.

Supplier: VWR Collection

VWR® Basic SPP frocks are manufactured from a strong, lightweight and breathable, spunbonded polypropylene (SPP) fabric, which protects against dirt, grime, and certain dry particulates, in non hazardous environments.

Supplier: DuPont

These collared overalls feature Tyvek® at the front and a large breathable spunbound polypropylene back panel. Ideal for use in environments where comfort is important and exposure risk is limited to the front.

Supplier: DuPont

These Tyvek® overalls are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: VWR Collection

These robust yet lightweight overalls are made from an optimised non woven PE fabric. Its softer feel and open structure still offers adequate Type 5 and 6 barrier protection and remains permeable to both air and moisture vapour.

Supplier: DuPont

These sterile overboots are made of Tyvek®. This fabric is composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort.

Supplier: DuPont

These gowns are made of Tyvek® which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort.

Supplier: DuPont

This hood is not clean-processed and not sterilised made of Tyvek®, a flash spun high density polyethylene. The fabric is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size) and is ultra-low linting.

Supplier: DuPont

These sleeves are made of Tyvek® which is a fabric composed of flash spun high density PE, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).