You searched for: Fittings and Connectors

Supplier: CADENCE SCIENCE

These tubing connectors are used in hospitals, laboratories, and biomedical instruments. The metal connectors are precision machined and are made from either nickel plated brass or 316 stainless steel.

Supplier: VARIAN

Vespel/graphite and precision graphite ferrules for chromatography applications.

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, XU-655, flangeless fittings includes nut, PEEK black and washer, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 1/4" OD tubing

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: UPCHURCH SCIENTIFIC

Specifically designed for Ismatec® pump tubings.

Supplier: VICI JOUR RESEARCH

Standard fitting kit

Supplier: VARIAN

Ferrule, 0,25 mm to 0,25 mm ID, 15% graphite/85% Vespel®

Supplier: EDWARDS HIGH VACUUM METTLER

Elbows 90°, DN 16 mm, Aluminium

Supplier: VICI JOUR RESEARCH

Low pressure adapter, PP, male luer to 1/4”-28 female, PP

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing pieces made of aluminium.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-482T-01, flanged nut, ETFE natural, for 1/16" OD tubing, ETFE

Supplier: VARIAN

PEEK fittings resists pressure up to 5000 psi and temperature of 100 °C.

Supplier: VICI JOUR RESEARCH

Adapter, connects safety exhaust filter to SCAT® waste caps and A.I.T. smart waste caps

Supplier: VICI JOUR RESEARCH

These plugs and caps are used for plugging ports and capping solvent lines.

Supplier: VARIAN

Bond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: UPCHURCH SCIENTIFIC

VacuTight™ fittings provides airtight, dependable connections under vacuum and low pressure conditions. These nuts have streamlined profiles for use in systems requiring a large number of connections in a small area, the ferrules are small size ensures sufficient nut/thread engagement, even in shallow ports. Ideal for combichem, high throughput screening, clinical diagnostic and other automated liquid handling applications.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel and PEEK polymer.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Super Flangeless™, P-258B, ferrule, ETFE, blue, ETFE

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing pieces made of stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-245, flangeless fitting for 1/16" OD tubing, PFA natural/ETFE blue, 1/4-28 flat-bottom port, standard knurl

Supplier: GILSON

The Gilson safe aspiration station Y-shaped tubing connector is for use with the Gilson safe aspiration station.

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Supplier: VARIAN

Biocompatible adapter, 1/16” to 1/8”, PEEK, with fittings, PEEK

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.