You searched for: Elektroforézis reagensek

Supplier: Thermo Fisher Scientific

QuantaBlu™ Fluorogenic peroxidase substrate kit is a three-component kit containing proprietary fluorescent substrate, peroxide and stop solutions for stopped (endpoint) or non-stopped assays.

Supplier: Thermo Fisher Scientific

SuperSignal™ West Pico PLUS Chemiluminescent Substrate is an enhanced chemiluminescent (ECL) horseradish peroxidase (HRP) substrate that enables picogram- to high femtogram-level protein detection by Western blot analysis.

Supplier: Thermo Fisher Scientific

Miser™ Antibody Extender Solution NC is a post-transfer nitrocellulose membrane-treatment reagent that enables Western blot detection with much less primary antibody.

Supplier: Thermo Fisher Scientific

SuperSignal® ELISA Femto maximum sensitivity substrate utilises the SuperSignal® system with an enhancer formulation for superior protein detection and low-end linearity in ELISA applications. Ideal for automated high-throughput screening applications.

Supplier: Thermo Fisher Scientific

LightShift™ Chemiluminescent RNA EMSA Kit provides a non-radioactive solution for studying RNA-protein interactions using an electrophoretic mobility-shift assay (EMSA).

Supplier: Thermo Fisher Scientific

The Pierce™ ECL Plus Western Blotting Substrate is an acridan-based chemiluminescent and chemifluorescent HRP substrate for Western blot detection using X-ray film or CCD- or laser-based imagers.

Supplier: Thermo Fisher Scientific

Pierce™ Firefly Signal Enhancer (100X) is designed to complement the Firefly Luciferase Flash and Glow assay and is recommended when maximum sensitivity is desired.

Supplier: Thermo Fisher Scientific

These kits include SuperSignal™ West Pico Substrate that is a highly sensitive enhanced chemiluminescent substrate for detecting horseradish peroxidase (HRP) on immunoblots. The kits also contain reagents for the specific detection of biotinylated antibodies, rabbit IgG or mouse IgG. The substrate’s intense signal output enables detection of picogram amounts of antigen. The sensitivity, intensity and duration of the signal allow for easy detection of HRP using photographic or other imaging methods. Blots can be repeatedly exposed to film to obtain optimal results or stripped of the immunodetection reagents and reprobed.

Supplier: Thermo Fisher Scientific

OPD (o-phenylenediamine dihydrochloride) is a water-soluble substrate for horseradish peroxidase (HRP) that produces a yellow-orange product detectable at 492 nm by ELISA plate readers.

Supplier: G-Biosciences

DNAmark™ 1 kb Plus ladder contains 15 DNA bands ranging from 100 bp to 10 kb. The 500 bp and 3000 bp fragment are present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 500 bp and 3000 bp are 40 ng. The 500 bp and 3000 bp fragment are 100 ng.

Supplier: LONZA

DNA marker is for rapid size estimation of PCR products and restriction fragments. DNA can be visualised by ethidium bromide staining or kinased with radiolabelled ³²P for detection by autoradiography.

Supplier: Biotium

A visible three- colour protein marker for SDS-PAGE or western blotting, with 12 bands ranging from 8 to 245 kDa.

Supplier: Thermo Fisher Scientific

This wide range molecular weight marker contains 60 ng/μl of 21 fragments from 100 bp to 12000 bp. The bands appear in 100 bp increments from 100 to 1000 bp and in 1000 bp increments from 1 to 12 kb. Bands at 1 kb and 5 kb stain brighter to aid identification.

Supplier: PanReac AppliChem

This DNA ladder is ideal for determining the size of double-stranded DNA ranging from 100 to 1,000 base pairs. The ladder consists of ten fragments that range in size from 100 to 1,000 bp in 100 bp increments. The 500 bp fragment is present at increased intensity to allow easy identification. All fragments are blunt-ended.

Supplier: LONZA

QuantLadders are prepared from five highly purified DNA fragments that provide visual quantitation of DNA within ±1% accuracy. The DNA QuantLadder provides each DNA fragment in perfect relative mass equivalence at 100 ng, 70 ng, 50 ng, 20 ng and 10 ng. The reverse QuantLadder simply reverses the mass equivalence order of the QuantLadder.

Supplier: G-Biosciences

DNAmark™ 100 bp Plus ladder consists of 14 DNA fragments ranging in size from 100 to 3000 base pairs (bp). The 500 bp and 1200 bp fragment are present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 500 bp and 1200 bp are 40 ng. The 500 bp and 1200 bp fragment are 100 ng.

Supplier: G-Biosciences

DNAmark™ 100 bp ladder consists of 11 fragments ranging from 100 to 1500 base pairs (bp). The 500 bp fragment is present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 500 bp are 40 ng. The 500 bp fragment is 100 ng.

Supplier: G-Biosciences

DNAmark™ 500 bp ladder consists of 10 DNA fragments ranging from 500 bp to 5000 bp. The 2000 bp fragment is present at increased intensity to allow easy identification. All fragments are precisely quantified and mixed during the production. For 5 µl loading, all fragments except 2000 bp are 40 ng. The 2000 bp fragment is 100 ng.

Supplier: PanReac AppliChem

The main applications for prestained protein markers are the monitoring of protein migration during SDS-PAGE, verification of Western transfer efficiency on membranes, and estimation of protein sizes on SDS-polyacrylamide gels and Western blots.

Supplier: LONZA

Thse DNA ladders provides rapid and easy size determination of the DNA samples. Each band has an ideal 50 % G-C content for precise sizing and sharp resolution. It is free from contaminating plasmid DNA with minimal background.

Supplier: LONZA

ProSieve™ Color protein marker have been labelled with three different fluorescent dyes. These markers are supplied as a lyophilised solid containing the buffer salts and detergent found in the typical Laemmli buffer system. It contains nine proteins with approximate masses of 10, 15, 20, 25, 40, 50, 80, 125, and 190 kDa.

Supplier: Biotium

A visible three-colour protein marker for SDS-PAGE or western blotting, with 10 bands ranging from 10 to 180 kDa.

Supplier: Thermo Fisher Scientific

DNA ladders are used in gel electrophoresis to determine the size and quantity of testing DNA fragments of genomic, plasmid, and PCR DNA. They are commonly used in the studies of plasmid DNA and PCR products.

Supplier: Thermo Fisher Scientific

From 250 to 5000 base pairs: 5 bands from 125 to 1000 bp; four bands from 1500 to 5000 bp. Recommended load volume 20 µl.

Supplier: G-Biosciences

Many lysis buffers and reagents used in sample preparation are incompatible with routinely used electrophoretic analysis. The presence of contaminants, or interfering agents, such as salts, acids, bases and detergents, result in band distortion and poor protein resolution. As a result, SDS-PAGE gels are hard to analyse and lack reproducibility. PAGE-Perfect™ is a simple, two-step method for concentrating, cleaning and preparing protein solutions for running publication quality gels.

Supplier: Thermo Fisher Scientific

The Pierce™ Fast Western Blot Kit, SuperSignal™ West Femto Substrate contains optimised reagents that shorten the time to perform a typical Western blot from 4 hours to ~60 minutes.

Supplier: Thermo Fisher Scientific

Saponin permeating solution, is used as a cell permeabilising agent.

Supplier: G-Biosciences

Perfect-FOCUS™ is based on quantitative precipitation and concentration of protein solutions using UPPA™ (Universal Protein Precipitation Agent) and has been specifically developed for preparing lower conductivity protein samples for iso-electric focusing gels. Perfect-FOCUS™ is designed to clean and remove interfering agents from protein samples and concentrate protein solutions that give poor protein spot resolution during 2D electrophoresis.

Supplier: Rockland Immunochemicals

TrueBlot® Western blot kits contain the critical supporting reagents, buffers, and substrates for immunoprecipitation and Western blotting of samples using TrueBlot® second step immunoblotting reagents in conjunction with the user's own primary IP antibody and primary (mouse, goat or rabbit IgG) Western blotting antibody.

Supplier: Thermo Fisher Scientific

SSC solution is commonly used in nucleic acid hybridization techniques at concentrations ranging from 0,1X to 20X depending on the application. It is used to facilitate transfer of nucleic acids to membranes in Southern and Northern blotting, dot blotting, and colony and plaque lifts.