You searched for: Electrophoresis Reagents

Supplier: Thermo Fisher Scientific

SuperSignal™ Western Blot Enhancer is a membrane treatment and a primary antibody diluent that has been shown to increase intensity of a target protein band on a Western blot and to enable detection of a target analyte at a level at which it could not be detected without enhancement.

Supplier: Thermo Fisher Scientific

The Pierce™ S-Nitrosylation Western Blot Kit enables sensitive detection of protein S-nitrosocysteine post-translational modifications.

Supplier: ENZO LIFE SCIENCES

AMPIGENE® DNA ladder contains DNA fragments ranging from 50 bp to 1500 bp that can be used as molecular weight standards for agarose gel electrophoresis. The bands are evenly spaced and are intensified at 200 bp, 500 bp and 1500 bpto serve as easily identifiable reference bands. The approximate mass of DNA in each of the bands is provided, assuming 5 µl load, for determining the approximate mass of DNA in samples with comparable intensity and sizes.

Supplier: Thermo Fisher Scientific

Some antibodies are difficult to remove from Western blots and require Longer incubation times or incubation temperatures greater than 22 °C. Restore™ PLUS Western Blot Stripping Buffer was developed to reduce incubation times while keeping incubations at room temperature. High-affinity antibodies can be quickly and effectively stripped from Western blots without removing transferred proteins, thereby allowing multiple reprobes of the target.

Supplier: Thermo Fisher Scientific

SuperSignal™ West Femto maximum sensitivity substrate enables detection of low-femtogram amounts of protein deposited on nitrocellulose or PVDF membrane and probed with appropriate primary and secondary antibodies.

Supplier: Thermo Fisher Scientific

NBT (nitro-blue tetrazolium chloride) yields a blue-purple, water-insoluble product upon reduction of the tetrazolium salt. The product of reduction is NBT-formazan. This substrate is widely used for immunochemistry applications because the color is linear and stable. NBT is used as the substrate for both glucose oxidase and alkaline phosphatase systems.

Supplier: Thermo Fisher Scientific

The Fast Western Blot Kit, ECL Substrate contains optimised reagents that shorten the time which is required to perform a typical chemiluminescent Western blot from 4 hours down to approximately 55 minutes.

Supplier: Thermo Fisher Scientific

Guardian™ Peroxidase conjugate stabiliser/diluent preserves the functional integrity and activity of horseradish peroxidase conjugated antibodies and other proteins at very dilute concentrations for long term storage.

Supplier: Rockland Immunochemicals

Lambda phage consists of a virus particle including a head (also known as a capsid), a tail and tail fibres. The head contains the phage's double-stranded circular DNA genome. The phage particle recognises and binds to its host E.coli causing DNA in the head of the phage to be ejected through the tail into the cytoplasm of the bacterial cell. Lambda phage DNA is commonly used as a DNA molecular weight marker. Digestion of the lambda phage genome with HindIII produces a set of 8 fragments consisting of 125, 560, 2000, 2300, 4300, 9400, and 23000 base pairs.

Supplier: Thermo Fisher Scientific

FastRuler ultra low range DNA ladder is specifically designed for fast sizing and approximate quantification of double-stranded DNA in 48 well (or 96-well) high throughput gels, as well as in conventional agarose gels. The ladder is a mixture of five blunt-ended chromatography-purified individual DNA fragments that are easily resolved in a short separation distance (10 to 20 mm) after an 8 to 14 minutes run on the appropriate agarose gel.

Supplier: Thermo Fisher Scientific

MassRuler Low Range DNA Ladder, ready to use, 80 to 1031 bp, is specially designed for accurate quantification and sizing of DNA fragments by agarose gel electrophoresis.

Supplier: Thermo Fisher Scientific

RiboRuler™ high range RNA ladder allows precise sizing of RNA molecules in denaturing agarose gels and Northern blotting.

Supplier: Biotium

Ready to use DNA ladders are supplied in 1X loading buffer at an optimal concentration for loading GelRed™ and GelGreen™ precast gels.

Supplier: Thermo Fisher Scientific

HisProbe™-HRP is a nickel (Ni²⁺)-activated derivative of horseradish peroxidase (HRP) that enables direct, IMAC-based detection of His-tagged proteins and other histidine-rich proteins in Western blots and microplates.

Supplier: Thermo Fisher Scientific

DAB (3,3'-diaminodbenzidine) is a sensitive colorimetric substrate used with horseradish peroxidase (HRP) in immunohistochemistry and immunoblotting applications. HRP catalyses hydrogen peroxide oxidation of substrates such as DAB. Electrons are transferred by HRP from the DAB to the peroxide to yield an insoluble brown product.

Supplier: Thermo Fisher Scientific

North2South™ Biotin Random Prime DNA Labeling Kit uses random heptanucleotides, Klenow fragment and biotin-nucleotides to produce biotinylated DNA templates for DNA hybridisation and detection methods.

Supplier: Thermo Fisher Scientific

Pierce™ Horseradish peroxidase (HRP) is purified horseradish peroxidase enzyme for use in activity assays and conjugation to antibodies for ELISA, Western blot and immunohistochemistry applications.

Supplier: Thermo Fisher Scientific

Clean-Blot™ IP detection kit (HRP) contains enough Clean-Blot™ IP detection reagent and accessory reagents for 25 mini-blots or 2000 cm² of membrane. Clean-Blot™ IP detection reagent is a horseradish peroxidase conjugate that is optimised for post-immunoprecipitation western blot detection of primary antibodies without interference from denatured IP antibody fragments.

Supplier: Rockland Immunochemicals

Lambda DNA fragments prepared by the digestion of purified lambda DNA with the restriction endonuclease Hind III.

Supplier: Thermo Fisher Scientific

O'RangeRuler™ DNA ladders are step ladders that consist of basic unit repeats of 10, 15, 20, 50, 100, 200, or 500 bp. The ladders have a higher density of bands at a specific DNA size range and are therefore suitable for more accurate sizing of DNA in agarose or non denaturing polyacrylamide gels.

Supplier: Thermo Fisher Scientific

Thermo Scientific Lambda DNA/HindIII Marker is recommended for sizing of linear double-stranded large DNA fragments in agarose gels. Lambda DNA is digested to completion with the appropriate restriction enzyme(s) and purified and dissolved in storage buffer. DNA fragments contain various sticky ends depending on the restriction enzyme used for preparation of the marker.

Supplier: MP Biomedicals

The EtBr Greenbag™ Disposal Kit allows rapid and trouble-free concentration of ethdium bromide from large volumes of solutions into a small 'teabag' containing activated carbon. The Greenbag™ is then conveniently disposed of along with other solid hazardous wastes.

Supplier: Thermo Fisher Scientific

The SuperSignal™ West Dura Extended Duration Substrate is a sensitive, luminol-based enhanced chemiluminescent substrate for detecting horseradish peroxidase (HRP) on immunoblots. SuperSignal West Dura Substrate enables mid-femtogram detection of antigen by oxidising luminol in the presence of HRP and peroxide. This reaction produces a prolonged chemiluminescence which can be visualised on X-ray film or an imaging system. Optimal signal intensity and duration can be attained with appropriate primary and secondary antibody dilutions.

Supplier: Thermo Fisher Scientific

LightShift™ Chemiluminescent EMSA Kit is a robust and sensitive system for performing electrophoretic mobility shift assays (EMSA) to identify and characterise protein-DNA binding interactions.

Supplier: Thermo Fisher Scientific

Chloronaphthol (4-CN) is a peroxidase substrate used for chromogenic detection of HRP in immunoblotting and immunohistochemical applications. This product is less sensitive than other precipitating substrates, but the distinct blue to blue-purple precipitate photographs well and can be useful in double-staining applications. The coloured product is soluble in alcohol and xylenes, but is not soluble in aqueous buffers. The 1-Step Chloronaphthol is supplied ready to use.

Supplier: Thermo Fisher Scientific

The Thermo Scientific 1-Step Ultra TMB-Blotting Solution is a ready-to-use, single-component horseradish peroxidase (HRP) substrate for Western blotting applications (not for use in ELISA assays or immunohistochemical applications). The high sensitivity, increased signal-to-noise ratio and low background blotting solution contains soluble TMB (3,3´,5,5´-tetramethylbenzidine), which reacts with HRP to produce an insoluble dark blue precipitate. The substrate is compatible with both nitrocellulose and PVDF membranes.

Supplier: AAT BIOQUEST

Amplite® West ECL HRP substrate is an ultra-sensitive chemiluminescent (ECL) substrate formulated for highest sensitivity and stability.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ GeneRuler™ and O'GeneRuler™ DNA ladders are mixtures of chromatography-purified individual DNA fragments. The GeneRuler™ line includes the most popular ladders, such as the 100 bp and 1 kb DNA Ladder. GeneRuler™ DNA ladders are available in two formats: Conventional (provided in TE buffer) and a ready-to-use format (premixed with 6X DNA Loading Dye which contains bromophenol blue and xylene cyanol FF). O'GeneRuler™ DNA ladders are another ready-to-use version of GeneRuler™ DNA ladders that are premixed with 6X Orange DNA Loading Dye.

Supplier: ENZO LIFE SCIENCES

AMPIGENE® DNA ladder contains DNA fragments ranging from 100 bp to 1500 bp that can be used as molecular weight standards for agarose gel electrophoresis. The bands are evenly spaced and are intensified at 500 bp and 1500 bpto serve as easily identifiable reference bands. The approximate mass of DNA in each of the bands is provided, assuming 5 µl load, for determining the approximate mass of DNA in samples with comparable intensity and sizes.

Supplier: ENZO LIFE SCIENCES

AMPIGENE® DNA ladder contains DNA fragments ranging from 100 bp to 10000 bp that can be used as molecular weight standards for agarose gel electrophoresis. The bands are evenly spaced and are intensified at 500 bp, 1500 bp and 3000 bp to serve as easily identifiable reference bands. The approximate mass of DNA in each of the bands is provided, assuming 5 µl load, for determining the approximate mass of DNA in samples with comparable intensity and sizes.