You searched for: Water Purification Systems

Supplier: VWR Collection

This compact system produces EDI-based Type II water directly from tap water. Quality of Type II water meets or exceeds water quality as defined by ASTM, CAP, CLSI and ISO 3696 / BS 3997, and also complies with the purified water requirements from the European and U.S. Pharmacopoeia.

Supplier: Merck

Suitable for general, non-critical laboratory applications or as a pretreatment for ultrapure water systems, the RiOs™ 3 system provides an ideal solution for Type III laboratory grade water needs such as manual cleaning and rinsing, buffer preparation, feed water for humidifiers, autoclaves and glassware washers. Designed for users seeking a compact, easy to use solution, the RiOs™ 3 system will be highly appreciated for its intuitive operation, small footprint and ease of maintenance. For users needing access to ultrapure water, the RiOs™ 3 system is ideal as pretreatment for Synergy® or Milli-Q® water purification systems. Up to 30 L/day of high quality analytical grade water (Type III water) from tap water.

Supplier: Merck

The compact, easy to use Milli-DI® water purification system has been designed especially to meet a need for small quantities of pure water, between 3 and 5 litres per day. The water produced is suitable for use in chemical and electrochemical applications, for the production of buffers, reagents and microbiological culture media, and a multitude of other applications. Milli-DI® water can also be used as feed water for ultrapure water systems.

Supplier: Merck

The Milli-Q® SR 240 water purification system delivers pure reverse osmosis (RO) water to a mobile SQ Switch 3,5 L tank. This tank is easily transferred to the Milli-Q® SQ 200 Purification System to produce fresh ultrapure water anywhere in the lab. Thanks to the mobile SQ Switch tank, this water system adapts to any lab configuration: the RO water production unit is placed next to a potable water source, while unlimited ultrapure dispensing modules can be positioned anywhere in the lab or building with an electrical outlet. This allows for a flexible installation that can be easily adapted and scaled according to changing lab requirements.

Supplier: Merck

Super-Q® Plus System is a high-flow water system designed to provide the 'final polish' to water which has been pretreated by reverse osmosis, distillation or deionization. The systems consistently produce ultrapure water quality which exceeds Type 1 ASTM/CAP/CLSI specifications.

Supplier: Merck

This Reverse Osmosis membrane removes 95 to 99% of contaminants including ions, particulates, bacteria, and organic molecules (MW >200kDa)

Supplier: Merck

Milli-Q® IQ Element water purification and dispensing unit is designed to fit into your trace analysis workflow. The Milli-Q® IQ Element unit, combined with a Milli-Q® IQ 7 series water purification system, delivers analytical grade ultrapure water that is suitable for trace and ultra-trace elemental analyses, including ICP-MS, GF-AAS and trace IC.

Supplier: Merck

Milli-Q® EQ 7008/7016 ultrapure and reverse osmosis (RO, Type 3) water systems are designed to produce consistent ultrapure water quality [resistivity 18,2 MΩ.cm at 25 °C; total organic carbon (TOC) ≤5 ppb] direct from a tap water source. Final ultrapure water quality can be adapted to each user’s specific application requirements. Plus, a range of intelligent design features make it effortless to dispense water as needed and where needed in the lab.

Supplier: VWR Collection

This powerful and intuitive laboratory water purification system produces Type I ultrapure water from RO, distilled or deionised water. The product water quality meets or exceeds CLSI and CAP Type I water standards.

Supplier: VWR Collection

This powerful, intuitive laboratory water purification system provides superior and consistent ultrapure Type I and EDI-based Type II water from tap water. Water quality meets or exceeds ASTM, CLSI, CAP and ISO Type I water standards, respectively.

Supplier: Sartorius

The arium® advance EDI provides Type 2 water in consistently high quality. The innovative iJust makes the best use of environmental resources by automatically optimizing water consumption. Unlike conventional water purification systems, the unique display with touch functions in combination with the intuitive menu navigation ensures easy operation.

Supplier: VWR Collection

Our VWR® laboratory-grade water purification systems feature an inspiring, application-oriented design. Perform your workflows faster and more reliably, simplifying your daily lab work while ensuring cost-efficient operation over the long term. All instruments offer flexible solutions as they can be adapted to your requirements and integrated into your laboratory environment.

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Supplier: MIELE

The Aqua-Soft system provides a continual supply of soft water and is suitable for water with a hardness up to 71° dH. It operates as a level controlled two-tank system, consisting of two cartridges with ion exchange resins and a salt reservoir. The resins are enriched with sodium ions. The hard water flows over the resins in the first cartridge, where calcium and magnesium ions are exchanged for sodium ions. At this time, no water is flowing through the second cartridge. When one cartridge is exhausted, the water is routed to the second cartridge by means of a hardness level selector corresponding to the hardness of the local water, which is inserted by customer service when the device is used for the first time. At the same time, the regeneration of the resins from the exhausted container is activated. For this treatment, brine (NaCl) is drawn from the salt reservoir. The reservoir must be replenished regularly with coarse salt pellets. Fill quantity approx. 25 kg.

Supplier: MIELE

Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.

Supplier: VWR Collection

This 'two in one' lab water system produces ultrapure (Type I) and RO (Type III) water from tap water. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Supplier: VWR Collection

This compact 'plug and play' lab water system is an ideal choice for users who need up to 20 litres of ultrapure Type I water or RO water (Type III) per day. Quality of the ultrapure product water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Supplier: Sartorius

Arium® pro Type I water purification systems are designed for sophisticated users to meet all their requirements for reagent grade water, needed both for critical applications and routine analyses. Different versions are available for reliable and optimal analytical results.

Supplier: SMEG

The water purifier can be used to produce deionised water at 0,8 to 1 μS/cm, suitable for the final rinsing of instrument washers. The system uses mixed bed resins (disposable) which can also retain silica. When the resins run out, they can simply be replaced with the MI700WP kit.

Supplier: Sartorius

Arium® mini is exclusively made of high grade materials. With its intuitive guidance, closed bag system and the practical arium® aqua stop, the unit is ideal for a daily consumption of up to 10 L of ultrapure water.

Supplier: SMEG

WD4060 is a washer disinfector designed to work with two to four washing levels (up to 8 cskdin basket). The washing chamber measures 530×510×620 mm (150 litres) and has the capability of washing, chemical disinfection, thermal disinfection (up to 95 °C) and active drying with hepa filter.

Supplier: Sartorius

The arium® comfort II system supplies ASTM Type I and Type II ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® comfort II is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: Sartorius

The arium® basic system supplies ASTM Type I ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® basic is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: Sartorius

Compact Arium® Mini laboratory water systems have been designed for Type 1 ultrapure water requirements of 10 L per day and are ideal for use in preparation of buffers, media and samples, both in life sciences applications and in analytical laboratory procedures.

Supplier: Sartorius

Directly connected to your potable feed water source, this system delivers pure water (Type III) of the highest quality.

Supplier: SMEG

WD6010 is a single or double glass drop down door washer-disinfector. washing capacity of up to 12 din baskets with 65 cm width. the drop down door allows the operator to ergonomically load and unload the baskets included in the trolley without having to lift heavy weights. also available in a version with turbo cycles (WD6010T model).

Supplier: Sartorius

It is compact, environmentally friendly, reliable and easy-to-use. arium® comfort I produces ASTM Type 1 ultrapure water and Type 3 pure water. The system contains state of the art reverse osmosis technology and a unique cartridge. arium® comfort I optimizes water consumption using the integrated iJust control unit. Applied for HPLC, GC-MS, AAS, ICP-MS, Ion chromatography, TOC-Analysis, photometry and for buffer solutions.

Supplier: Cole Parmer

Get high purity water with all-glass construction.

Supplier: ELGA LabWater

Pure and ultra pure water system, PURELAB®, Pretreatment pack for PURELAB® Chorus 2 and PURELAB® Chorus 3 water purification systems

Supplier: ELGA LabWater

By choosing an ELGA water purification system, you are making an investment in quality, reliability and value.