Samplers

Supplier: VWR Collection

All sample dippers are made of blue PP and consist of a bottle with snap handle.

Supplier: VWR Collection

These sample dippers feature a basic container with a screw-in PTFE encapsulated steel shaft.

Supplier: VWR Collection

White PTFE ladle.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: VWR Collection

The SAS instrument control unit is placed outside and connected to the aspirating head using a simple electrical connection. All possible typical contamination sources from the vacuum sampling system are avoided using the SAS Super Isolator. An interesting application is that several heads can be controlled by a single SAS control unit, providing a practical and economical solution.

Supplier: VWR Collection

Piston sampler, made from chromium plated brass, sterilisable. The end of the tube is sharp for puncturing boxes, bales or bags containing soft pasty material.

Supplier: VWR Collection

Multi-sectored samplers for sampling powders, pellets and friable materials, which may become non homogeneous in bags at various levels. The models with separate sections are mainly used for chemical or physical analysis; models with communicating sections are used for microbiological analysis.

Supplier: VWR Collection

Cylindrical probe for aseptic sampling of ice cream and similar products. The probe is completed with a special PYREX® test tube for transport of the sample to the laboratory for the food industry, also ice cream producers and health authorities.

Supplier: VWR Collection

Cylindrical probe for the proper sampling of frozen products packed in bulk - to be used with electrical drill - suitable for collecting frozen goods. Ideal to use in the food industry and for health authorities. Method of use: Probe is fixed to an electric drill. The drill is activated and then pushed against the frozen surface to be sampled. The sampling is made easy by the anti-clockwise rotation of the drill. The 'carrot' is extracted from the probe with a rod and pushed into the sampling container. All these operations are aseptically performed in case of microbiological analysis.

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: Avantor

Cycle-Tap sampler is a device for sampling small quantities of solvent.

Supplier: VWR Collection

SAS Super Pinocchio CR is a compact microbial impaction sampler designed to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and a flow meter to regulate and achieve the required flow rate.

Supplier: VWR Collection

Environmental monitoring in cleanrooms is important and a critical part of the production chain for a manufacturing company.

Supplier: Avantor Fluid Handling

WFI Samplers are an easy and convenient solution for obtaining perfect fluid samples from a WFI water drop.

Supplier: VWR Collection

SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.