Ön a következőre keresett: Inkubátorok

Supplier: Thermo Scientific

CO₂ incubators offer precise direct-heat temperature control with choice of TC (thermal conductivity) or IR (infrared) sensor and convenient high-temperature decontamination cycle.

Supplier: DWK Life Sciences

WHEATON® CO₂ Incubators with an IR CO₂ sensor are ideal for everyday cell culture work and designed to be used with the WHEATON® Roller Apparatus.

Supplier: Lovibond

The TC series of thermostatically controlled cabinets is used for continuous temperature control over a range of 2 to 40 °C. This makes them ideal for a wide range of different applications in industrial and research laboratories. In particular they are ideal for the temperature controlled storage of samples or BOD determination in effluent analysis work. Devices such as magnetic stirrers, which require a power supply, can be connected to sockets incorporated in the interior of the cabinet. Improved, robust, insulated housing and highly efficient components provide maximum energy efficiency.

Supplier: DWK Life Sciences

WHEATON® standard incubators are ideal for general growth and incubation requirements. Designed specifically for use with WHEATON® Roller Apparatus.

Supplier: MEMMERT

The ICO series of CO₂ incubators has seamlessly welded, corrosion-resistant stainless steel chambers with rounded edges and no further installations, ensuring easy and thorough cleaning. Models have TwinDISPLAY with a USB port for uploading programs, reading out logs or protecting appliances via the user ID function, and an Ethernet interface as well as a data logger with a 10 year storage capacity. All parameters can be set directly in the ControlCOCKPIT or the AtmoCONTROL software, which uses drag and drop symbols to input values. Battery-buffered ControlCOCKPIT (optional): Operating display, logging and CO₂ control are fully functional even during a power failure.

Supplier: MEMMERT

Sets eco standards for cultivation below room temperature: Unmatched energy efficiency, excellent heat-up, cool-down and recovery times.

Supplier: Thermo Scientific

CO₂ Incubator

Supplier: Thermo Scientific

Heracell Vios CR cleanroom compatible CO₂ incubators are third party-certified, suitable for use in ISO Class 5 and GMP Grade A/B environments.

Supplier: Thermo Scientific

The Midi 40 CO₂ incubator is designed specifically for people who require a compact culturing workspace to handle small workloads, perform personal use applications, or have limited workspace. The unit has the same performance and capabilities as full sized incubators and is a good solution to avoid shared-use environments that can present potential contamination risk through unnecessary sample handling and repeated door openings.

Supplier: Thermo Scientific

Thermo Scientific™ Forma™ Series II Water-Jacketed CO2 Incubators provide precise CO₂ control, unsurpassed temperature stability and superior parameter recovery characteristics, with continuous contamination control technology. They provide an environment for the growth of microbiological samples or mammalian cells for research (FDA Class 1), and IVF and other regulated cell therapy applications (FDA Class 2).

Supplier: MEMMERT

The ICOmed series of CO₂ incubators has seamlessly welded, corrosion-resistant stainless steel chambers with rounded edges and no further installations, ensuring easy and thorough cleaning. Models have TwinDISPLAY with a USB port for uploading programs, reading out logs or protecting appliances via the user ID function, and an Ethernet interface as well as a data logger with a ten year storage capacity. All parameters can be set directly in the ControlCOCKPIT or the AtmoCONTROL software, which uses drag and drop symbols to input values. Battery-buffered ControlCOCKPIT (optional): Operating display, logging and CO₂ control are fully functional even during a power failure.

Supplier: Thermo Scientific

Specifically designed to deliver the performance reliability, ease of operation and value required to support a range of culturing needs from basic research to demanding leading-edge applications. Specifically designed to deliver the performance reliability, ease of operation and value required to support a range of culturing needs from basic research to demanding leading-edge applications.

Supplier: Thermo Scientific

These CO₂ incubators embody an innovative generation of equipment offering optimum protection from contaminants. They guarantee optimum repeatability of results. Thanks to their outstanding performance features the BBD 6220 and the Cytoperm®2 are predestined for all sectors making stringent demands on protection, safety and quality of work: in microbiological laboratories and with in vitro fertilisation as well as in cancer research or tissue engineering. Each incubator is characterised by reliability, safety and practical application characteristics complying with highest levels of quality.

Supplier: VELP SCIENTIFIC

These cooled incubators have a refrigerated thermostat with 120 and 200 L capacity that ensures excellent connectivity, high performance in temperature control thanks to the innovative auto tuning.

Supplier: MEMMERT

IFbw blanket warmer are suitable for warming non-sterile blankets and cloths, these are preheated to a precise temperature so they are readily available to help keep patients warm. This minimises the risk of complications such as wound infections, cardiovascular disorders, cardiac arrhythmia or vascular disorders. Thanks to the stainless steel chamber and outside surfaces, the units are easy to clean. Built-in safety features.

Supplier: VELP SCIENTIFIC

These BOD incubators have been designed to keep any product at a constant temperature, where accurate and precise temperature control is required. For applications where monitoring the sample is extremely important, the I models are ideal. The controlled heating and cooling thermoregulation system enables the user to select an operating temperature between 3 and 50 °C. The E models have wireless connection for TEMPSoft™. The I models have an internal transparent door and wireless connection for TEMPSoft™ and an auto tuning system which provides constant control of the internal temperature, by continuously comparing the detected and set values and aligning them via a precise and rapid adjustment system. All models have two internal sockets.

Supplier: UVP ULTRA VIOLET PRODUCTS

This benchtop UV Incubator with stainless steel interior is designed to provide precise temperature control and uniformity throughout the chamber. Used for incubation of biological assays, fungal, bacterial cultures, eggs and other biological samples.

Supplier: Lovibond

The DI 10 incubator is designed for reliable incubation of bacteriological slides, on-site, in a laboratory or even while mobile in a car or van.

Supplier: Thermo Fisher Scientific

Heratherm® Compact incubator features forced convection providing excellent temperature uniformity and stability, and fast recovery times after opening the door. This unit is recommended for use as a personal work space on the benchtop, and for BOD/water pollution testing. The unit is made of corrosion-free, easy to clean moulded polymer with rounded corners. An internal light and window in door facilitate sample observation.

Supplier: Thermo Fisher Scientific

Heratherm refrigerated incubators feature Peltier technology which maintains sample integrity at temperatures from 5 to 70 °C, very low energy consumption and they never need defrosting. Peltier technology ensures temperature uniformity and stability with minimal disruption due to vibrations. The compact units have a stainless steel interior, large clear vacuum fluorescent display and an internal glass door for viewing samples safely.

Supplier: Thermo Fisher Scientific

Heratherm™ cooled incubators offer exceptional environmental control in a hassle-free chamber that is easy to program and use.

Supplier: Cole Parmer

Clear acrylic construction offers full visibility of samples.

Supplier: Cole Parmer

Specially designed for use with microplates and Petri dishes.

Supplier: PHC Corporation

These incubators offer quality in performance, maximise cell culture productivity and provide optimum results and reproducibility.

Supplier: PHC Corporation

These units are designed for critical applications in pharmaceutical, biotechnology and clinical investigation. They can be used for culturing high volumes of patient samples, performing short-term studies, and working with large volume cell culture apparatus. The InCu saFe® copper-enriched stainless steel interior surfaces assure constant germicidal protection. The cross-shelf horizontal air flow system promotes optimum temperature uniformity throughout the incubator and contributes to rapid recovery after door openings.

Supplier: witeg Labortechnik

Low temperature BOD incubator with superior temperature uniformity by forced convection.

Supplier: PHC Corporation

These units are designed for demanding and regulated applications in the biomedical, pharmaceutical, medical research and clinical laboratory. They offer outstanding performance and advanced, multi-level contamination control to provide the ideal solution for cell culture protocols. The patented SafeCell™ UV treats interior airflow to destroy airborne and humidity pan contaminants and inCu saFe copper-enriched stainless steel interior surfaces assure constant germicidal protection. When total chamber decontamination with verification is required, the unique H₂O₂ decontamination option limits downtime to less than three hours.

Supplier: PHC Corporation

Spacers for double stacking, Dla: MIR-154

Supplier: REVCO TECHNOLOGIES

These 8000 WJ Series CO₂ incubators constructed with a triple wall and with a large volume of water provide unsurpassed temperature stability and protection against heat loss. The water jacket technology holds the temperature for extended periods of time, which is critical during power failures.

Supplier: REVCO TECHNOLOGIES

With precise temperature control and stability of all culture parameters, the Series 8000 direct-heat CO₂ incubators offer dependable flexibility for growing cells. The automatic high-temperature decontamination cycle is ideal for overnight sterilisation and ensures consistent sterilisation time after time. Units are light weight and easy to move with accessory roller base, there is a choice of TC or IR CO₂ sensor.