You searched for: Valves

Supplier: Avantor Fluid Handling

No maintenance required!

Supplier: Avantor Fluid Handling

Offer outstanding potential for precision control in liquid and gas analysis.

Supplier: Bohlender

Two-way valve with straight bore and two connections with GL thread completely made of PTFE.

Supplier: Bohlender

Valve body made of PP with connection (thread UNF ¼" 28G) suitable for b.safe caps. Lid with aeration opening and Luerlock connector, integrated non-return valve with upstream porous PTFE membrane (1 μm), including clip-on service life indicator.

Supplier: Avantor Fluid Handling

Prevent leaks with the emergency shutdown design.

Supplier: Avantor Fluid Handling

Precision machined and tested to ensure leak-free connections.

Supplier: ENTEGRIS

Corrosion-resistant Galtek® check valves reduce contamination potential in your high-purity chemical applications and provide clean delivery of sophisticated chemicals.

Supplier: Avantor Fluid Handling

Don’t worry about leaks.

Supplier: Avantor Fluid Handling

Specifically designed for Masterflex® pump tubing.

Supplier: Bohlender

Body made of PTFE with two connections with female thread UNF 1/4" 28 G. Valve made of PPS with set screw and lock nut for adjusting and fixing pressure between 0,1 and 5 bar.

Supplier: Bohlender

Valve body made of PP with connection (thread UNF ¹/₄" 28G) suitable for b.safe Caps.

Supplier: Avantor Fluid Handling

Excellent in applications where fast action and full bore pumping are needed.

Supplier: Avantor Fluid Handling

Nonmetallic wetted parts ideal for water and mild aqueous solutions.

Supplier: Trajan Scientific and Medical

Micro control valves provide precision metering and on-off control of gas flows. They are designed specifically for chromatography applications and used at elevated temperatures from high vacuum to medium pressure.

Supplier: Avantor Fluid Handling

Pressure rating up to 1050 psi.

Supplier: Bohlender

Body made of PTFE with 2 connections and nuts made of glass-fibre reinforced PTFE for connecting tubing or tube.

Supplier: Bohlender

Valve made from PPS with flow body made from PTFE. Can be used as a pressure relief valve with adjustable control of pressure or as a valve to prevent a fall in pressure during the filling process. Flow body with 2 GL 18 threaded connectors and valve with toggle for manual venting by tightening, set screw and lock nut to adjust and fix the application pressure in the range from 0,1 to 10 bar (factory setting 1,5 bar).

Supplier: ENTEGRIS

This 3-way valve (patent-pending) has an all-PFA valve body and high purity fluoropolymer wetted components providing a noncontaminating fluid stream and chemically compatible construction. Compliant to SEMI Standard F57-0301, the specification for polymer components used in ultrapure water and liquid chemical distribution systems.

Supplier: ENTEGRIS

O-ring free design, ¹/₂ or ¹/₄" orifice.

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. Allows continuous flow through parallel ports. When actuated, the sample port opens allowing fluid to flow out or in. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosive chemical handling applications.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosive chemical handling applications.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. Higher performance with greater back (outlet) pressure capability. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosive chemical handling applications.

Supplier: ENTEGRIS

This 3-way valve (patent-pending) has an all-PFA valve body and high purity fluoropolymer wetted components providing a noncontaminating fluid stream and chemically compatible construction. Compliant to SEMI Standard F57-0301, the specification for polymer components used in ultrapure water and liquid chemical distribution systems.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. Three-ported directional valve enables simplification of piping system design while minimising its footprint. All PFA wetted surfaces for ultrapure and corrosion resistant performance.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. Three and one-half complete turns fully opens or closes the valve for more precise control than a ¹/₄-turn valve. Slower actuation reduces water hammer affect on fluid stream. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosion chemical handling applications.

Supplier: ENTEGRIS

These components are constructed of high purity PFA and PTFE materials for wetted parts and PVDF, PEEK™ and PTFE u-cup with Viton® energizer for non wetted parts.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosive chemical handling applications.

Supplier: Avantor Fluid Handling

Exceptional durability.

Supplier: Bohlender

Pressure compensation sets consisting of screw cap made of PPS for GL thread, PTFE/silicone gasket and exchangeable filtering membrane made of PTFE. Filtering membranes (2 µm) made of PTFE.