You searched for: Disposable Garments

Supplier: DuPont

Shin-length gown with wrap-over rear closure, hook and loop neck closure, and waist ties.

Supplier: DuPont

Hooded coveralls feature Tyvek® fabric on the front of the garment and breathable SMS on the back. Tyvek® under gloves and Tyvek® socks are attached.

Supplier: DuPont

These Tyvek® overalls are made from flash spun, high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size).

Supplier: Nitritex

These disposable boot covers are made of BioClean-D™, a lightweight, low linting and hard-wearing fabric (PP laminated with a PE film) which provides maximum comfort and protects against fine sprays and particles.

Supplier: DuPont

These sterile overboots are made of Tyvek®. This fabric is composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort.

Supplier: DuPont

ProShield® Proper overalls are made of a proprietary DuPont non woven PE fabric (55 g/m²) that makes them incredibly tough, lightweight and resistant to tears and punctures.

Supplier: DuPont

These gowns are made of Tyvek® which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort.

Supplier: DuPont

These caps are made of Tyvek® which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash.

Supplier: DuPont

DuPont™ Tychem® 6000 F Apron model PA30L0. Shin-length apron with neck and waist ties. Available in grey and in one size.

Supplier: Nitritex

These disposable aprons are made of CleanTough™ fabric, a spunbonded non woven PP fabric laminated with a PE film. The elasticated cuffs are made of 100% polyester.

Supplier: Nitritex

These disposable overalls made from CleanTough™ fabric provide good protection against hazardous dusts (including nuclear particles) and limited protection against chemical splashes. Available with hood or with collar.

Supplier: Nitritex

These extra long BioClean-D™ disposable sleeve covers are made from CleanTough™ fabric, which is spunbonded non woven PP laminated with a film of PE. This fabric allows comfort and flexibility during use and protection against fine sprays and particles.

Supplier: DuPont

These sleeves are made of Tyvek® which is a fabric composed of flash spun high density PE, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: DuPont

These unhooded coveralls, model IC183BWH TS, are made of Tyvek®, a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability, and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: DuPont

Air-fed coverall with cuff elastication and integrated dissipative socks.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Extra-long sterile Tyvek sleeves are packaged in multiple layers of Tyvek peel pouches and poly bags to gain access into the aseptic area without excessive spraying and wiping with sanitisation agents. The sleeves are individually packed and specially folded for easy aseptic donning.

Supplier: DuPont

These hoods with integrated mask, model IC689BWH WS, are made of Tyvek®, which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability, and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.

Supplier: Nitritex

Sterile, disposable coverall with collar for protection against chemicals.

Supplier: DuPont

These hooded coveralls, model IC193BWH TS, are made of Tyvek®, a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: DuPont

This hood is not clean-processed and not sterilised made of Tyvek®, a flash spun high density polyethylene. The fabric is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size) and is ultra-low linting.

Supplier: DuPont

The apron is made of Tyvek®, a fabric composed of flash spun high density PE. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size). Specially designed for use with Tyvek® apparel, this apron offers enhanced protection for body parts that are more exposed to hazardous substances.

Supplier: DuPont

Air-Fed coverall with attached non-dssipative undergloves and integrated dissipative socks.

Supplier: DuPont

Accessories for Tychem® 6000 AL Ventilated Coveralls

Supplier: DESCO

Disposable conductive surgical style Booties are 'one size fits all' with elastic opening.

Supplier: Nitritex

Lightweight beard cover made of soft non woven PP. Suitable for use in a variety of environments.

Supplier: DuPont

These hooded overalls are made of Easysafe fabric, an optimised non woven PE fabric from DuPont. It is softer and with a more open structure than Tyvek®. It is therefore less protective than Tyvek® (L1431N), but offers adequate Type 5 and 6 barrier protection and remains both air and moisture vapour permeable.

Supplier: DuPont

These collared overalls feature Tyvek® at the front and a large breathable spunbound polypropylene back panel. Ideal for use in environments where comfort is important and exposure risk is limited to the front.

Supplier: DuPont

This robust yet lightweight garment benefits from the use of a specific 'impervious technology' to achieve an effective barrier against many low-concentrated water-based inorganic chemicals (even under pressure) and small-sized hazardous particulates, as well as oil repellences.

Supplier: DuPont

The Tyvek® 400 Dual garment combines Tyvek® on the front with a non woven SMS panel on the back. The Tyvek® front is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres down to 1 micron in size.

Supplier: DuPont

These hooded protective coveralls are made from a non halogenated, flame-retardant polypropylene SMS non woven fabric providing limited protection against flame spread (index 1) in addition to protection against particles and limited liquid splashes or sprays of water-based liquids. They must always be worn on top of a primary FR protection garment, such as Nomex®.