You searched for: Closures
Whether protecting the sample from outside contamination or the workplace from the bottled toxic waste, closures guarantee tight and reliable seals. With a vast cap selection for best compatibility with any container, tailoring to specific contents is possible. Temperature resistant models allow any procedure to be completed safely. Available in different finishes, any sensitive chromatography sample is protected. The caps are easy to close with one hand and come in many colors to assist with identification.
Sealing caps, Nalgene®
Supplier: Thermo Fisher Scientific
PP, autoclavable.
Expand 6 Items
Screw caps and septa for storage vials, Chromacol™
Supplier: CHROMACOL
Caps and septa are convenient and minimise contamination from handling.
Expand 3 Items
Vásárolja meg Acros & Alfa Aesar vegyszereit az Avantor®-tól, hogy optimalizálja laboratóriuma ellátását
Már bízik a Thermo Fisher kiváló minőségű vegyi anyagaiban, valamint az Avantor® kiváló szolgáltatásában és támogatásában. Nos, miért ne kombinálná a kettőt?
NMR tubes, polyethylene pressure caps
Supplier: DWK Life Sciences
Tight-fitting, polyethylene cap which stays in place even with a build-up of internal vaporisation pressures.
Expand 6 Items
Caps for autosampler vials
Supplier: MICROSOLV
Chromatography vial closure, Small caps, use with ND18 vials, 19,8×5,2 mm, Type: Polyethylene-push on
Expand 1 Items
Glass caps for culture media bottles, DURAN®
Supplier: DWK Life Sciences
DURAN®, borosilicate glass 3.3, clear.
Expand 2 Items
Closures for screw neck headspace vials, Chromacol™
Supplier: CHROMACOL
Chromacol™, Chromatography vial closure, Steel, Ø: 18 mm, Silver steel magnetic screw cap, 8 mm hole, Type: 18-MSC, Hardness: -, Septum: -, Thickness: - mm
Expand 3 Items
Closures for 13 mm screw neck vials, Chromacol™
Supplier: CHROMACOL
PP screw caps with or without seals.
Expand 5 Items
Caps for microcentrifuge tubes, SnapTwist Micrew™
Supplier: Simport Scientific
Snap caps , Cap with loop, PE, SnapTwist Micrew™, Colour: Yellow
Expand 14 Items
Multiple distributor for Jerrican, S thread with GL thread connectors, BOLA
Supplier: Bohlender
PTFE.
Expand 2 Items
Closures for 8 mm crimp top vials, Chromacol™
Supplier: CHROMACOL
Chromacol™, Chromatography vial closure, Aluminium, Ø: 8 mm, Silver crimp cap, 4 mm hole, Type: 8-AC-ST15, Hardness: 50° shore, Septum: White silicone/red PTFE, Thickness: 1,3 mm
Expand 1 Items
Axygen® Screw Caps for Transport Tubes
Supplier: Corning
These screw caps are used for 5/10 ml transport tubes.
Expand 1 Items
Dust covers
Supplier: EP SCIENTIFIC
These PE dust covers are designed to fit all standard size VOA vial caps. They prevent contamination and protect critical samples during transport.
Expand 1 Items
Seals and closures for 8 mm screw vials, Chromacol™
Supplier: CHROMACOL
Chromacol™, Chromatography vial closure, PP, Ø: 8 mm, Black PP screw cap with central hole, Type: 8-SC, Hardness: -
Expand 9 Items
Screw caps for wash bottles, wide mouth, Azlon
Supplier: SciLabware
PP, coloured
Expand 5 Items
Cap lock for microtube
Supplier: Greiner Bio-One
Cap lock for microtubes, non-sterile, For tubes: 1,5 ml
Expand 1 Items
Caps, KIM-KAP™, disposable, KIMBLE®
Supplier: DWK Life Sciences
PP, coloured.
Expand 25 Items
Screw caps for moulded pathology media vials, WHEATON®
Supplier: DWK Life Sciences
Self-sealing PP caps provide leak proof seal, aluminium caps fitted with non-inhibitory rubber liners are suitable for storage of cultures and allow cell growth.
Expand 4 Items
PP cap for screw top autosampler vials, AQR™
Supplier: MICROSOLV
Chromatography vial closure, PP, For: RSA™ or AQ™ screw top vials with 9-425 threads, Septum: Non slit, flitted ultra pure silicone/PTFE septa
Expand 1 Items
Caps for cell culture flasks, EasYFlasks™, Nunclon™Δ
Supplier: Thermo Fisher Scientific
Ideal for cell culture flasks. Offered in two different types vent/close and filter.
Expand 1 Items
Pouring rings for laboratory bottles, DURAN®
Supplier: DWK Life Sciences
PP, coloured.
Expand 3 Items
Screw cap with septum for sample tubes
Supplier: Simport Scientific
This aqua colour screw cap incorporates a pierceable septum made of chemically resistant PTFE on the outside and silicone on the inside, both components being stable over a broad range of temperatures.
Expand 1 Items
Screw caps for laboratory bottles, with temperature probe holder
Supplier: DWK Life Sciences
PP caps with stainless steel holder.
Expand 1 Items
Caps for RSA™ autosampler vials, AQR™
Supplier: MICROSOLV
Chromatography vial closure, PE, Snap caps, Light blue colour, Septum: Fitted ultra pure clear silicone/PTFE septa
Expand 2 Items
Screw caps for 9 mm screw neck vials, Chromacol™
Supplier: CHROMACOL
Chromacol™, Chromatography vial closure, PP, Ø: 9 mm, Blue screw cap, open top with 6 mm hole, Type: 9-SC(B)-8RT1X, Hardness: 58 °shore A, Septum: Red natural rubber/clear PTFE, pre-slit, Thickness: 1,0 mm
Expand 1 Items
Pouring rings for square laboratory bottles, DURAN®
Supplier: DWK Life Sciences
PP, blue.
Expand 2 Items
Caps for cell culture flasks, Nunc™ Cell Factory™
Supplier: Thermo Fisher Scientific
These caps reduce the need for open interventions and support the use of aseptic methods for fluid handing relating to filling, inoculation, feeding and harvesting of the cell factory system.
Expand 1 Items
Caps, closed top
Supplier: EP SCIENTIFIC
PP, white.
Expand 4 Items
Screw cap with septum for microcentrifuge tubes, Micrewtube™
Supplier: Simport Scientific
This screw cap incorporates a pierceable septum made of chemically resistant PTFE on the outside and silicone on the inside, both components being stable over a broad range of temperatures. The septum also acts as a silicone o-ring for better sample protection.
Expand 1 Items
Supplier: EPPENDORF
Supplier: Integra
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: Integra
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: Testo
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio