Ön a következőre keresett: Protein Linking and Labeling Systems

Supplier: Enzo Life Sciences

Bio-7-dATP (Biotin-7-2’-deoxyadenosine-5’-triphosphate) can replace dATP in reactions in which it serves as a substrate for E. coli DNA polymerase (holoenzyme and Klenow fragment), T4 and Taq DNA polymerases, reverse transcriptase (from AMV and M-MuLV) and terminal transferase.

Supplier: Apollo Scientific

Liquid product red odourless pH-value 7,3 to 7,5 Boiling point 102 °C. Stabiliser for a broad range of HRP conjugates.

Supplier: Enzo Life Sciences

Fluorescent probe for Zn²⁺. Cell permeable.

Supplier: Biotium

Lipophilic membrane dyes designed specifically for EV research and the best choice for general pan-EV staining.

Supplier: Enzo Life Sciences

Allylamine-2’-deoxyuridine-5’-triphosphate (Allylamine-dUTP) can replace TTP in reactions where it serves as a substrate for E.coli DNA polymerase 1 (holoenzyme and Klenow fragment), terminal deoxynucloetide transferase, T4 and Taq DNA polymerases, and reverse transcriptases (from ALV and MLV).

Supplier: Biotium

Reactive quenchers that act as acceptors in fluorescence resonance energy transfer (FRET) applications.

Supplier: G-Biosciences

The micro HOOK™ Biotin kits are designed to label small amounts of proteins, with each kit designed for 8 to 10 labellings of 50 to 250 µg protein/reaction.

Supplier: Enzo Life Sciences

Fluorescein-12-UTP is ideal for in vitro transcription reactions catalysed by T3, T7, or SP6 RNA polymerases and reverse transcriptase to produce fluorophore-labeled RNA transcripts. RNA-based probes can be used to identify complementary sequences by in situ hybridisation to fixed cells and tissues by direct or indirect fluorescence detection or by membrane hybridisation procedures.

Supplier: Enzo Life Sciences

Mixture of fluorescent dyes for detection of lysosomes, mitochondria and nucleic acids

Supplier: Enzo Life Sciences

Red 650 [Cyanine-5E] dUTP is a cyanine-5 derivative with enhanced spectral properties. This nucleotide analog can replace TTP in reactions in which it serves as a substrate for E.coli DNA polymerase (holoenzyme and Klenow fragment), T4 and Taq DNA polymerases, reverse transcriptase (from AMV and M-MuLV) and terminal transferase. Fluorescently labeled probes can be prepared with this fluorescent nucleotide by a variety of methods including nick translation, cDNA labelling and 3'-end labelling.

Supplier: Biotium

A wheat germ agglutinin (WGA) lectin labelled with Biotium’s CF® Dyes or HRP. It is a carbohydrate-binding lectin that has high affinity for sialic acid and N-acetylglucosamine moieties of glycoproteins. As a result, WGA conjugates will label yeast bud scars and the cell membrane of gram-positive bacteria and mammalian cells.

Supplier: Biotium

The simplicity and convenience of Mix-n-Stain™ labelling, for conjugation of 1 mg IgG with fluorescent CF® dyes or other dyes.

Supplier: Columbia Biosciences

Because of its high quantum yield, B-PE is considered the world’s brightest fluorophore.

Supplier: Biotium

CF® dye-dUTP can be used for TUNEL assay, microarray, or to synthesize labelled DNA probes for in situ hybridisation and nucleic acid blotting applications.

Supplier: Biotium

This kit contains everything needed to label antibodies or other proteins with biotin succinimidyl ester (biotin SE). Each kit contains reagents for three labelling reactions of up to 1 mg protein per reaction.

Supplier: Enzo Life Sciences

Fluorescein-12-ddUTP can be used for 3’-end labeling of oligodeoxynucleotides using terminal transferase. It also serves as a substrate for E.coli DNA Polymerase I (holoenzyme and Klenow fragment), T4 and T7 DNA polymerases, Taq DNA polymerase and reverse transcriptase. Oligonucleotide probes labelled with fluorescein-12-ddUTP can be detected by direct fluorescence detection (green fluorescence) or by methods using horseradish peroxidase- or alkaline phosphatase-linked anti-fluorescein antibodies.

Supplier: Enzo Life Sciences

This kit offers a set of three different monoclonal antibodies specific for threonine phosphorylation sites. Phosphorylation patterns in a given cell extract may differ when probed with different antibodies due to sequence specificity. Recognition therefore depends on two criteria: Phosphorylation and surrounding aa motif. If one of the two criteria is not fulfilled, the antibody will not detect the phosphorylation site.

Supplier: Apollo Scientific

Liquid product red odourless pH 6,7 to 6,9. Protein free Stabiliser. Enzyme activity preservation by special chemistry.

Supplier: Biotium

Phalloidin is a toxin isolated from the deadly Amanita phalloides mushroom. It is a bicyclic peptide that binds specifically to F-actin. Fluorescent conjugates of phalloidin are convenient tools to investigate the distribution of F-actin in fixed and permeabilised cells or tissue sections. One unit (U) of phallodin is sufficient to stain one sample (200 µl staining volume). A highly selective actin filament stain for fixed and permeabilised cells. Labeled phalloidins have similar affinity for both large and small filaments.

Supplier: Enzo Life Sciences

Bio-16-ddUTP (Biotin-16-2’,3’-dideoxyuridine-5’-triphosphate) can be used for 3’-end labelling of single-stranded or double-stranded DNA. It is especially useful as a substrate for terminal transferase for the 3’-terminal addition of a single Bio-16-ddUMP. Biotin-labelled oligonucleotides produced by this reaction are suitable as hybridisation probes and nucleic acid array assays. It is also a substrate for Taq DNA polymerase and other DNA polymerases.

Supplier: Cayman Chemical

Bilirubin conjugate is a stable, water-soluble ditaurate derivative of bilirubin meant to mimic endogenous bilirubin glucuronide derivatives.

Supplier: Enzo Life Sciences

Gold 550 [Cyanine-3E] dUTP is a cyanine-3 derivative with enhanced spectral properties. This nucleotide analogue can replace TTP in reactions in which it serves as a substrate for E.coli DNA polymerase (holoenzyme and Klenow fragment), T4 and Taq DNA polymerases, reverse transcriptase (from AMV and M-MuLV) and terminal transferase.

Supplier: Enzo Life Sciences

This kit offers a set of seven different MAbs specific for tyrosine phosphorylation sites. Phosphorylation patterns in a given cell extract may differ when probed with different antibodies due to sequence specificity. Recognition therefore depends on two criteria: Phosphorylation and surrounding aa motif. If one of the two criteria is not fulfilled, the antibody will not detect the phosphorylation site. Specificity has been determined by epitope mapping using degenerated phosphopeptide libraries.

Supplier: G-Biosciences

The Calmodulin Resin Kit is for the affinity purification of calmodulin binding proteins (CBP), including recombinant proteins with a CBP tag and calmodulin-regulated proteins in eukaryotic cells. The resin is 4% agarose coupled to calmodulin and has a ligand density of approximately 1 mg calmodulin/ml resin.

Supplier: Biotium

ExoBrite™ CTB EV Staining Kits were designed to overcome some of the challenges of EV detection, particularly in flow cytometry. ExoBrite™ CTB EV Stains bind to molecules in the EV membrane for bright, specific staining, with little to no background.

Supplier: Enzo Life Sciences

Green 496 [5-Fluorescein] dUTP can replace TTP in reactions in which it serves as a substrate for E. coli DNA polymerase (holoenzyme and Klenow fragment), T4 and Taq DNA polymerases, reverse transcriptase (from AMV and M-MuLV) and terminal transferase.

Supplier: Enzo Life Sciences

The kit offers a set of six different MAbs specific for serine phosphorylation sites. Phosphorylation patterns in a given cell extract may differ when probed with different antibodies due to sequence specificity. Recognition therefore depends on two criteria: phosphorylation and surrounding aa motif. If one of the two criteria is not fulfilled, the antibody will not detect the phosphorylation site. Specificity has been determined by epitope mapping using degenerated phosphopeptide libraries. Clone 16B4 strongly interacts with pSK and pSP motifs, thus specifically recognizes substrates of MAP/SAP Kinases and CDC kinases.Clones 1C8, 4A3, 4A9, 4H4 and 7F12 interact with epitopes containing phosphoserine in the context of positive or neutral aa (e.g. substrates of PKA, PKB, PKC, PKG etc.) Though revealing a similar pattern in epitope mapping using phosphopeptide libraries, these antibodies interact with different sets of phosphoproteins in whole cell lysates.

Supplier: Biotium

Dihydrorhodamine 123 is the reduced form of rhodamine 123, which is a commonly used fluorescent mitochondrial dye. It is non-fluorescent, but it readily enters most of the cells and is oxidized by oxidative species or by cellular redox systems to the fluorescent rhodamine 123 that accumulates in mitochondrial membranes. It is useful for detecting reactive oxygen species including superoxide (in the presence of peroxidase or cytochrome c) and peroxynitrite. Dihydrorhodamine 123 dihydrochloride is functionally equivalent to dihydrorhodamine 123 but with increased stability toward air oxidation and light during storage. Dihydroethidium (also called hydroethidium) is the chemically reduced form of the commonly used DNA dye ethidium bromide. The probe is useful to detect oxidative activities in viable cells, including respiratory burst in phagocytes. Dihydroethidium itself has blue fluorescence (355/420 nm) in cells, while the oxidized form ethidium has red fluorescence (518/605 nm) upon DNA intercalation. H2DCFDA (2′,7′-Dichlorodihydrofluorescein diacetate) is a useful fluorogenic reagent to detect reactive oxygen intermediates in cells. On oxidation, H2DCFDA becomes the highly green fluorescent 2′,7′-dichlorofluorescein, 504/529 nm (end product).

Supplier: Enzo Life Sciences

Fluorogenic chromophore. Ex(max): 380nm, Em(max): 460nm. Reference compound.

Supplier: Enzo Life Sciences

Cell viability dye