You searched for: Fittings and Connectors

Supplier: UPCHURCH SCIENTIFIC

Unions with stainless steel bodies and PEEK fittings.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: VARIAN

Bond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge.

Supplier: UPCHURCH SCIENTIFIC

PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-245, flangeless fitting for 1/16" OD tubing, PFA natural/ETFE blue, 1/4-28 flat-bottom port, standard knurl

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, U-650, replacement flangeless ferrule, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 1/4" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-124H, fitting, micro headless knurl, PEEK blue, 6-32 coned port, for 360 μm OD tubing, 5000 psi, PEEK

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE

Supplier: CADENCE SCIENCE

FLL to M5 × 6 mm thread (plated brass), Stainless steel, Thread: 0,125" NPT

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

MarvelX biocompatible PEEK-lined stainless steel UHPLC connection system is easy to use and eliminates dead volume. It also provides higher repeat uses without sacrificing from consistent performance.

Supplier: UPCHURCH SCIENTIFIC

PEEK, stainless steel or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: UPCHURCH SCIENTIFIC

ETFE or PEEK.

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing cross, stainless steel, 130 mm, DN 40/25, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: UPCHURCH SCIENTIFIC

VHP Microferrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments.

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. 10-32 threads, for 1/16" tubing. Fingertight up to 350 bar (5000 psi).

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1592 Adapter, 1-16 female to 1-8 flat-bottom, female, 1 mm thru-hole, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.