You searched for: Fittings and Connectors

These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.

Sort By

« ‹ 1 2 3 › »

Avantor® Hichrom, UHPLC Column Connector

Supplier: Avantor

This reusable UHPLC column connector have 10-32 threads. This fitting is reusable, as they are not permanently swaged onto the inlet tubing.

Expand 1 Items

Reducing tubing connectors, b.safe

Supplier: Bohlender

Straight fitting made of PP, with two hose connectors of elastic tubing with different inner diameters.

Expand 2 Items

Tubing connectors, cross-shaped, BOLA

Supplier: Bohlender

The Cross-shaped fitting, made of PTFE with four connectors for elastic tubing.

Expand 1 Items

Fedezze fel az Alfa Aesa és Arcor termékeit nálunk!

Vásárolja meg Acros & Alfa Aesar vegyszereit az Avantor®-tól, hogy optimalizálja laboratóriuma ellátását

Már bízik a Thermo Fisher kiváló minőségű vegyi anyagaiban, valamint az Avantor® kiváló szolgáltatásában és támogatásában. Nos, miért ne kombinálná a kettőt?

Vásároljon most!

Tubing connectors Y, b.safe

Supplier: Bohlender

Y-shaped fitting made of PP, with three hose connectors for elastic tubing.

Expand 6 Items

Tubing connectors, b.safe

Supplier: Bohlender

Straight fitting made of PP, with two hose connectors for elastic tubing.

Expand 3 Items

Tubing connectors, straight, BOLA

Supplier: Bohlender

Straight fitting, made of PTFE, with two connectors for elastic tubing (e.g. Viton®, Tygon®, silicone).

Expand 4 Items

Adaptor tri-clamp hose connector, BOLA

Supplier: Bohlender

Fitting made of PTFE for transition of Tri-Clamp as per DIN 32 676 to a hose connector.

Expand 1 Items

Reducing tubing connectors, straight, BOLA

Supplier: Bohlender

Straight fitting, made of PTFE, with two connectors for elastic tubing with different inner diameters.

Expand 3 Items

HFC39 series plastic couplings

Supplier: CPC COLDER

These high flow couplings feature automatic shut-off valves which stop flow and eliminate the need for pinch clamps, stainless steel connectors or fittings.

Expand 8 Items

Fittings preparative, b.safe

Supplier: Bohlender

Fittings made of PTFE to fix tubing in the tubing connectors (thread NPT ¹/₈") of b.safe caps. The conical seal cone clamps the tubing and tightens at the connector. Packing unit: 1 piece.

Expand 4 Items

b.safe Fittings PFAS Analytic

Supplier: Bohlender

Fittings made of PE to fix tubing in the capillary connectors (thread UNF ¹/₄" 28G) of b.safe Caps PFAS Analytic.

Expand 2 Items

Screw-in tubing connectors, straight, BOLA

Supplier: Bohlender

Straight fitting, made of PTFE, with one connector for elastic tubing (e.g. Viton®, Tygon®, silicone) and one screw-in thread (either NPT or G).

Expand 6 Items

Multiports, b.safe

Supplier: Bohlender

Extension of the number of capillary and/or tubing connectors on a b.safe Waste Cap. With PFA Fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¹/₄"), 1 hose connector for tubing Int.Ø 5,5 to 8,0 mm (thread NPT ¹/₈").

Expand 8 Items

FitQuik™ Tubing Connectors, Straight, Reducer

Supplier: CPC COLDER

FitQuik™ Connectors from Colder Products Company are high quality fittings for leak-free tubing connections. These precision molded fittings are designed to eliminate tubing leak points in applications such as medical devices, analytical instrumentation or air-driven equipment.