Supplier: BURKLE

Disposable ZoneDispo samplers for pourable bulk goods up to 2 mm particle size.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: BURKLE

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod.

Supplier: BURKLE

GeoSampler is specially designed for soil sampling.

Supplier: Bertin Instruments

Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.

Supplier: Bertin Instruments

Portable dry air sampler for bio contamination control.

Supplier: BURKLE

Cleaning reusable samplers is a demanding and often complicated task, with greasy, strongly adhesive or toxic substances. An ergonomic handle makes it easier to draw the sample as with a syringe.

Supplier: GERBER FUNKE

It is made up of stainless steel with valve for automatic drainage.

Supplier: BURKLE

Very robust model with specially hardened forged drill bits. For determining soil properties, moisture and structure. The shape of the Mole‘s drill bits ensures minimum friction when drilling and removing the Mole from the ground.The Mole has different components. Handle with 75 cm rod, extension rod 100 cm if necessary and one of seven available drill bits, each of which is designed for a particular soil type. The components can be combined without any problems. Extension rods can extend the working depth of the Mole down to 5 m. Please order drill bits seperately.

Supplier: BURKLE

Suction samplers for viscous media such as paste, sludge, cream, or oil.

Supplier: BURKLE

This disposable TargetDispo sampler is to take a target point sample at a position in the sample material that has previously been precisely determined. Sampler is closed while it pierces into the powder or granulate, when it reaches the sample removal point it is opened and then closed again, in this way a precise target-point sample is obtained.

Supplier: BURKLE

This disposable DispoPicker is used in the sampling of powders and small-grain bulk materials. Because the tip is closed, the sample material cannot trickle back out of the sample lance.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: BURKLE

The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm.

Supplier: BURKLE

ProfiSampler, the vacuum-operated sample collector for robust industrial use.

Supplier: BURKLE

The Powder Sampler Mini is a stainless steel sampler for small quantities. The sampler precisely collects 0,01, 0,05, and 0,1 ml sample volumes, depending on the version.

Supplier: BURKLE

DispoLadle is a sampling scoop specially designed for disposable use. The scaled scoop with embossing can be used for measuring. It shows contents in increments of 10 ml.

Supplier: BURKLE

Made of stainless steel or PP, transparent, sample bottles made of PE. The QuickPicker is appropriate when bulk goods are withdrawn directly from sacks, bags or open containers. The sample is filled directly into sample bottles. Sampling depth 300 mm, Ø 25 mm, length 500 mm, 75 ml volume.

Supplier: BURKLE

Novartos Uno sampler with two or three sample chambers, for one sample zone.

Supplier: BURKLE

Pigment lance to sample pigments, pastes and agglomerating bulk goods.

Supplier: BURKLE

Completely made from non spark-producing materials, nickel plated.

Supplier: BURKLE

Disposable sampler for the highest standard in sampling unlike conventional reusable samplers, disposable samplers do not need to be cleaned after use. Simple disposable sampler for taking samples of low viscosity media. Cleaning reusable samplers is a demanding and often complicated task with greasy toxic substances. Sometimes the task is even impossible. Cross contamination is completely eliminated. It has two opening sizes (2,5/5,5 mm) for different viscosities.

Supplier: BURKLE

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask.

Supplier: BURKLE

Made of ultra-pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Fits all vats and barrels with openings of at least 32 mm Ø.

Supplier: Avantor Fluid Handling

Simple and safe removal of liquid samples.

Supplier: BURKLE

Guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the complete Spiralus has been filled. The shape of the sampling slits prevents seeds from being cut up. The Spiralus provides an excellent all-layer sample.

Supplier: Hach

Portable water sampler using pressure-vacuum technology. Combines small dimensions by offering the 24×1 l bottle option for glass as well as plastic bottles or 25 l composite PE bottle. Enables the option of 24×1 l or 1×25 l PE sample bottles, respectively 24×1 l or 1×20 l glass sample bottles, in combination with an active cooled sampler base. This is especially interesting for sampling in accordance to local regulation (24 × hourly mixed sample/daily mixed sample). Cleaning efforts are reduced to a minimum due to the new designed vat sample distributor and the standard round sample bottles. The sampler offers two cooling options for ensuring a sample storage at 4 °C: passive with ice packs or active with an integrated cooling machine including autarkic temperature control. The pressure-vacuum sampler is ISO 5667 compliant. To avoid cross contamination, the system is purged before and after each sample is taken. The compact, weatherproof housing made of PE plastic ensures failure-free operation over many years and often changing installation locations. Even in extremely corrosive applications. All programming features of stationary sampler products are available.

Supplier: BURKLE

This DispoTube sampler can be used for taking samples of liquids. Its ergonomic handle makes it easier to work and facilitates a good grip even under difficult conditions, for example with gloves.

Supplier: Hach

These lightweight samplers with low power requirements (12 VDC) have been designed for easy mobility.

Supplier: BURKLE

With EasySampler, it is possible to take multiple samples from bulk goods, quickly and easily.