"Water"

Supplier: Spectrum Chemical

Chlorine Water, Saturated Solution, Approx. 0.4 Percent Chlorine, U.S.P. Chlorine Test Solution is a Spectrum solution concentrate that allows the preparation of fresh, reliable standard volumetric solutions quickly and accurately.

Supplier: Merck

Milli-Q® EQ 7008/7016 ultrapure and reverse osmosis (RO, Type 3) water systems are designed to produce consistent ultrapure water quality [resistivity 18,2 MΩ.cm at 25 °C; total organic carbon (TOC) ≤5 ppb] direct from a tap water source. Final ultrapure water quality can be adapted to each user’s specific application requirements. Plus, a range of intelligent design features make it effortless to dispense water as needed and where needed in the lab.

Supplier: VWR Collection

Unstirred water baths with double walled, stainless steel (inner) and coated steel sheet (outer) housing. All baths except the 2 litre models feature a drain tap for convenient emptying and are suitable for use with water or alternatively with heat transfer beads. Baths with a capacity of 5 litres or more have a heat transfer bead mode which is activated through the main menu. A drain stopper (plug) is supplied as on optional accessory to ensure heat transfer beads do not get stuck in the drain outlet. Note: Baths are classified Safety Class 1, allowing unattended operation when used with non flammable liquids.

Supplier: Sartorius

The Arium® Smart Station can be optimised to fit easily into any lab environment. Combine the Smart Station with the water system type needed to dispense pure or ultrapure water. The Smart Station ultrapure supports multiple points of use to save costs and valuable lab space.

Supplier: Merck

Economical water system, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 l/min. For clinical analysers with pure water needs up to 480 L daily

Supplier: Merck

LiChrosolv® hypergrade is accurately tested for LC-MS suitability, meeting all the requirements of modern LC-MS ionisation methods (ESI / APCI - positive and negative mode).

Supplier: Merck

The Milli-Q® SQ 200P water purification system delivers ultrapure (Type 1) water from a lab's pressurized purified (RO/DI) water loop. It benefits from a flexible handset dispenser to deliver ultrapure water.

Supplier: Merck

The Milli-Q® SQ 240C water purification system delivers both pure reverse osmosis (RO) water and ultrapure (Type 1) water. It benefits from a flexible handset dispenser to deliver ultrapure water. It can also be equipped with a gravity valve (optional) to dispense pure RO water directly from the SQ Switch 3,5 L tank base.

Supplier: Merck

Pure and Ultra Pure Water System, Milli-Q®, Q-POD® remote dispenser, Water quality (Type): Type II (pure water), Type I (ultra pure water)

Supplier: Merck

LiChrosolv® hypergrade is accurately tested for LC-MS suitability, meeting all the requirements of modern LC-MS ionisation methods (ESI / APCI - positive and negative mode).

Supplier: VWR Chemicals

Acetonitrile:Methanol:2-Propanol:Water (25:25:25:25) (v/v/v/v), HiPerSolv CHROMANORM® wash solution, for LC-MS

Supplier: USBECK Laborgeräte

Water pump manometer

Supplier: Sartorius

The Arium® Smart Station can be optimised to fit easily into any lab environment. Combine the Smart Station with the water system type needed to dispense pure water. Smart Station pure supports multiple points of use to save costs and valuable lab space.

Supplier: SELECTA

Aquasel is suitable for continuous distilled water requirements.

Supplier: LABCONCO

WaterPro RO stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water (type III). RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. The units be connected to glassware washers to provide purified rinse water.

Supplier: Spectrum Chemical

Bromine Water, Saturated Solution is a yellow liquid and a powerful oxidizer. It is most commonly used as a reagent in chemical assays.