"Spectrophotometer"

Supplier: CHEMetrics

The method measures total soluble copper as ppm (mg/L) Cu. The test kits are applicable for analysis of drinking water, surface waters, groundwater, wastewater and seawater.

Supplier: Merck

Spectroquant® CombiCheck solutions are ready to use multi-parameter standards for the range of applications of Spectroquant® test system. Each pack contains a standard solution and a spiking solution. Both solutions can be used for quality assurance as they are, without dilution.

Supplier: Merck

The PhotoCheck test set is designed for testing the wavelength accuracy of all Merck photometers and spectrophotometers. It can be used as a secondary standard for testing instruments according to DIN/ISO 9000 and ISO 14000. The stable colour solutions can be used to test the following spectrophotometer filters and wavelength settings: 445 and 446 nm, 520 and 525 and 690 nm. The accuracy of the wavelength setting and the linearity of the extinction measurement is checked with four solutions per wavelength. The traceability of these test solutions to international standards is guaranteed by examining them in a reference photometer that is checked against the primary standard (NIST standard). These values are properly documented and supplied as part of the set.

Supplier: Merck

A reference standard for chlorine, chlorine dioxide and ozone, that is designed to reassure the user about the accuracy and reliability of the results from the Picco and Multy colorimeters.

Supplier: VWR Chemicals

Bandwidth standards.

Supplier: Agilent

Accessory for Colour measurement, Tubing kit for UV/VIS OQ/PV tests, to flush flow cell of 8453 UV-Vis spectrophotometer. Includes tubing, fittings, adapter

Supplier: Liebherr

The didymium liquid filter consists of praseodymium and neodymium, dissolved in perchloric acid. This filter is ideally suited for checking the wavelength accuracy of spectrophotometers in the UV and visible range. It has a spectrum with a variety of characteristic, very well-defined peaks in the range between 320 and 870 nm.

Supplier: G-Biosciences

Protein assay, Assay cuvettes (1 ml)

Supplier: Thermo Orion

Orion™ AQUAfast™ COD reagents in digestion tubes are designed for use with Orion™ AQUAfast™ colorimeters and Orion™ AquaMate Vis and UV-Vis spectrophotometers. Just add the sample to the COD digestion tube, digest sample in thermoreactor and measure.

Supplier: VWR Chemicals

Linearity standards packed in permanently sealed UV cuvettes or 100 ml amber bottles.

Supplier: VWR Chemicals

Stray light standards packed in permanently sealed UV cuvettes or 100 ml amber bottle.

Supplier: Lovibond

Verification accuracy of photometers and validity of results.

Supplier: MICROSOLV

Wavelength calibration standard solution for UV-Vis detectors is composed of 4% Holmium oxide in 10% Perchloric acid.

Supplier: USP

USP Reference Standards are specified for use in conducting official USP–NF tests and assays. USP also provides Reference Standards specified in the Food Chemicals Codex as well as authentic substances—high-quality chemical samples—as a service to analytical, clinical, pharmaceutical and research laboratories. To confirm accuracy and reproducibility, USP Reference Standards are rigorously tested and evaluated by multiple independent laboratories including USP, commercial, regulatory, and academic labs. USP also provide publicly available, official documentary standards for pharmaceutical ingredients in the USP–NF that link directly with our primary reference standards.

Supplier: G-Biosciences

β-Galactosidase assay is for determining the β-galactosidase activity in the lysates of cells transfected with a β-galactosidase expression construct. It uses chlorophenol red-β-D-galactopyranoside (CPRG), which is up to 10 times more sensitive than the classic O-nitrophenyl-β-D-galactopyranoside (ONPG) β-Galactosidase assays. This increased sensitivity makes it simpler to measure β-galactosidase activity in cells that are difficult to transfect or have low β-galactosidase activity expression. β-Galactosidase activity is measured using a spectrophotometer or a microplate reader to determine the amount of substrate converted at 570 to 595 nm.

Supplier: VWR Chemicals

Wavelength standards (certified at 0,1; 0,2; 0,5; 1 and 2 nm slit widths) packed in six permanently sealed UV cuvettes or 100 ml amber bottles.