4964 Results for: "Sartorius"

Supplier: Sartorius

The dispenser fully automatically releases membrane filters from their sterile packaging. You can choose one of the following modes: Push button, foot switch or sensor mode.

Supplier: Sartorius

Vivaflow® 50 is a disposable and ready-to-use crossflow cassette for filtration and concentration of samples from 100 ml to 3 L.

Supplier: Sartorius

LentiSELECT kits offer LentiSELECT 40, LentiSELECT 500 and LentiSELECT 1000 for the purification and concentration of VSV-G pseudotyped lentivirus from 40 to 1000 ml cell culture, leading to purified infective particles. These lentivirus purification and concentration kits offer purified recombinant lentivirus particles for in-vitro transfection a fast, safe and easy to use solution. These kits replace time-consuming ultracentrifugation protocols, which typically take about one day for large sample volumes, thus reducing the purification time to only a few hours.

Supplier: Sartorius

These paper boards are used for the filtration of cooking and transformer oils, galvanic baths and as base paper for further impregnation with certain reagents. They are made of refined pulp or cotton linters.

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%.

Supplier: Sartorius

Minisart® Ophthalsart with surfactant-free cellulose acetate (SFCA) is made for aqueous or oily solutions with a pH of 4 - 8. Type 17528 with a pore size of 0,2 µm can be used for sterile filtration and has a male luer slip outlet. Version K is individually packed and sterilised by ethylene oxide (EO). Only available in the EU/EEA and registered countries.

Supplier: Sartorius

Flexel® 3D tank liners are gamma irradiated, open single use bags designed to fit in plastic cylindrical drums.

Supplier: Sartorius

For samples up to 2 ml; membrane: Regenerated cellulose Hydrosart®. Vivacon® 2 centrifugal concentrators have been designed for DNA concentration, buffer exchange applications and primer removal. They feature a horizontal membrane design that is preferred by some users for reasons of consistency with previously used procedures and reproducibility.

Supplier: Sartorius

These nitrocellulose blotting membranes are ideal for Western blotting, DNA blotting, as well as dot or slot blots. They are optimally adapted to all protein blotting systems, such as electro transfer, semi-dry or simple capillary blotting. A high protein binding capacity is combined with low background to give good blocking possibilities. High membrane stability ensures easy handling of the blotting membrane, even when wet.

Supplier: Sartorius

Single-use polystyrene bottles for storage of media, buffers, and other aqueous solutions.

Supplier: Sartorius

Ready to use, sterile Microsart® @filter units combine a funnel, a filter base and a membrane filter in one unit. They have been specifically developed for the detection and enumeration of microorganisms in pharmaceuticals, cosmetics and other liquids.

Supplier: Sartorius

Sartofluor® LG MaxiCaps® are specially developed for liquid filtration. The modified construction is beneficial with regard to hydrodynamic flow and it is especially recommended for solvent filtration but can also be used as an air and gas filter. It improves the process security of sterile filtration of aggressive media (acids and bases) and solvents.

Supplier: Sartorius

This mechanical pipette with large display has been designed with comfort in mind. Tacta makes pipetting effortless and safe, while producing accurate and reliable results. The pipette is made from carefully selected materials, with each component designed to meet the highest standards.

Supplier: Sartorius

These standard filter housings are made of high grade stainless steel 316 L construction with minimal pressure losses due to optimised flow pattern.

Supplier: Sartorius

These qualitative filter papers are essentially used for analytical purposes and routine analyses, whenever no gravimetric analyses are required. They are wet-strengthened and can be used for pressure and vacuum filtration. They are made of refined pulp and linters with an >95% alpha-cellulose content, are very pure with an ash content <0,1%.

Supplier: Sartorius

Sartoguard® GF filter elements consist of glass fiber layers and PES membranes. They combine the defined retention performance for particles and microorganisms of membrane filters with the high total throughput capacity in the depth of the fibrous material. They are ideally suited for effective retention of particles, colloids and lipids which block more expensive sterilising grade or Mycoplasma retentive membrane filters quickly.

Supplier: Sartorius

Filter cartridge, Sartobran®, PP, Membrane material: CA, Type: 2-flange bayonet adapter with 226 double O-ring, Pore size: 0,2 µm, Filtration area: 18000 cm²

Supplier: Sartorius

Sartolon® filter cartridges are designed for broad chemical compatibility for specific applications in the pharmaceutical and chemical industry. The double-layer design leads to superior filtration performance compared to other nylon membrane filters. Ideal for filtration of a broad range of solvents and solvent-containing liquids.

Supplier: Sartorius

MPC coupling body, 1/4 PC

Supplier: Sartorius

The Arium® Smart Station can be optimised to fit easily into any lab environment. Combine the Smart Station with the water system type needed to dispense pure or ultrapure water. The Smart Station ultrapure supports multiple points of use to save costs and valuable lab space.

Supplier: Sartorius

Centrifugal ultrafiltration units, Vivaspin® 6, IVD

Supplier: Sartorius

Centrifugal ultrafiltration units, Vivaspin® Turbo 4, IVD

Supplier: Sartorius

Centrifugal ultrafiltration units, Vivaspin® Turbo 15, IVD

Supplier: Sartorius

The Sterisart® Universal pump, Gen 4 is a robust and reliable peristaltic sterility testing pump built from 316L mirror-finish stainless steel and used for sample and media transfer into the Sterisart® family of sterility testing canisters.

Supplier: Sartorius

Incucyte® Annexin V dye for apoptosis is a specially formulated, highly-selective phosphatidylserine (PS) cyanine fluorescent dye, designed for real-time evaluation of apoptosis in living cultures.

Supplier: Sartorius

Stainless steel closed filter holder for microbiological, analytical sampling and testing of gas in pressurised lines.

Supplier: Sartorius

A cardboard disc (1,4 mm thickness) is wetted with appropriate nutrient medium before the membrane filter is placed on. They are pre-sterilised in plastic magazines, suitable for the corresponding dispenser.

Supplier: Sartorius

Ready-to-connect units contains a multi-step combination of filters for effective and economical particle removal.

Supplier: Sartorius

The filter holder has been designed for in-line filtration.

Supplier: Sartorius

These Proline® multi-channel mechanical pipettes are ideal for universities and colleges or any laboratory seeking a cost-efficient, practical and reliable liquid-handling tool. Due to its relatively light weight, high accuracy and precision, it is used by many professionals.