433 Results for: "EQUIP LABO"

Supplier: EQUIP LABO

For benches, there must be provision for electrical power supplies protected at the top, conforming to the NFC 15 to 100 standard in force, namely one cable for 6×220 V single phase sockets. For the twin pole + earth, 10/16 A it is necessary to provide a 220 V single phase 3G 2,5 to 16 A, 30 mA cable.

Supplier: EQUIP LABO

Wide choice of coverings for worktops: laminate, glazed glass, drawn stoneware (standard) and composite resin or polypropylene (on request). The 'H' shaped metal legs are coated with an epoxy resin. The backsplashes, with or without shelf or central boxes are in water-repellent grey melamine, pre-drilled to receive the taps or electrical outlets.

Supplier: EQUIP LABO

Composition :

Supplier: EQUIP LABO

Kitlab®

Supplier: EQUIP LABO

Composition :

Supplier: EQUIP LABO

This furniture is equipped with 4 wheels (ø 80 mm), 2 with brakes, which allows to move them easily.

Supplier: EQUIP LABO

Work bench, Vacuum

Supplier: EQUIP LABO

VWR® Kitlab®, Laboratory Cabinet with Two Solid Doors

Supplier: EQUIP LABO

The taps are of 3 types:

Supplier: EQUIP LABO

Supplied assembled with fitting accessories, length 900 mm.

Supplier: EQUIP LABO

Mobile storage cabinet made of epoxy coated melamine.

Supplier: EQUIP LABO

Cabinets in melamine with a super-agglomerate face. Grey finish with white handles. Metal base with adjusting cylinder.

Supplier: EQUIP LABO

Composition:
Counter-top laminate worktop
Welded frame 40×40 mm
4 castors (Ø 80 mm), including two with brakes
Maximum load distributed: 240 kg

Supplier: EQUIP LABO

Cabinet, Showcase

Supplier: EQUIP LABO

Open cabinet, 3 shelves: 1 fixed and 2 adjustable. Made of water-repellent white melamine on all sides, inside and outside.

Supplier: EQUIP LABO

Composition:
1 under-basin fixed furniture unit with an identical finishing to the mobile furniture
1 sink worktop
1 U-bend
1 laminate front strip
or
2 metal legs
1 sink worktop
1 PE U-bend
1 laminate front strip
1 rear strip
1 rear fluid back panel
1 stop bar

Supplier: EQUIP LABO

Wall mounted cabinets with water resistant white melamine panels on all sides (inside and outside), front: black or white finish

Supplier: EQUIP LABO

Work bench, Under bench shelf: 1500×520 mm (L×W) for base frame with 600 mm depth

Supplier: EQUIP LABO

Composition:
1 under-basin fixed furniture unit with an identical finishing to the mobile furniture
1 sink worktop
1 splashback to fit
2 veneer shelf supports
1 wide shelf 160 mm, (10 mm front edge)
1 U-bend
or
2 metal legs
1 sink worktop
1 splashback to fit
2 veneer shelf supports
1 wide shelf 160 mm, (10 mm front edge)
1 PE U-bend
1 laminate front strip
1 rear strip
1 rear fluid back panel
1 stop bar

Supplier: EQUIP LABO

Fume hoods which are specially designed for labs with low flow rates are of three types they are registre, caisson and attaque.

Supplier: EQUIP LABO

Composition:
One backsplash
One tablet
Two tablet holders

Supplier: EQUIP LABO

Composition :
One work plan
One corner frame to connect to two standard benches

Supplier: EQUIP LABO

Frame:
30×30-mm metal base frame, protected by a white baked epoxy resin, fitted with level adjustment gas lift columns
Rear strip and a fluid back panel, with water resistant melamine on both sides, with all borders veneered
Metallic tube stop bar protected by a white epoxy resin

Supplier: EQUIP LABO

Furniture fixed (delivered without bench).

Supplier: EQUIP LABO

Bare wet benches:
Composition:
1 fluid back panel
2 metal legs
1 wet workbench
1 laminate front strip
1 rear strip
1 stop bar
1 black PP sink with Ø 40 mm U-bend

The 750 mm deep bench is equipped as standard with a 600 mm base, which cannot accommodate a splashback shelf. To add a splashback shelf, a 750 mm base is required.
No plumbing fixtures possible on the top surface for wet benches in enamelled glass and stoneware with built-in sink

Supplier: EQUIP LABO

Laboratory furniture, cabinet with vertical drawers, VWR Kitlab®

Supplier: EQUIP LABO

Kitlab®

Supplier: EQUIP LABO

Work surface:
All elements: sides, bottom and upper are white, water-resistant, laminated panels with a fire classification grade of M1.

Supplier: EQUIP LABO

Work bench, Applicator gun

Supplier: EQUIP LABO

About wall benchtop finish: 160×505 mm, Kitlab®