1300 Results for: "Cole-Parmer"

Supplier: Cole-Parmer

Flame photometer

Supplier: Cole-Parmer

Reducing connectors made of PVDF. Barbed fittings are designed for quick and easy assembly without tools. Combine these fittings with our flexible tubing for use in your low-pressure applications.

Supplier: Cole-Parmer

3505: Simple to use laboratory pH/mV/°C meter for use in general purpose and educational applications. It utilises rotary controls for mode selection and pH calibration. A novel design feature ensures that inadvertent movement of the calibration controls has no effect during sample measurement.

Supplier: Cole-Parmer

Combined electrodes for use with Jenway ion meters.

Supplier: Cole-Parmer

Fully specified dissolved oxygen meter from Jenway that includes full support for the B.O.D 5-day test protocol. Remote monitoring and data collection are facilitated by the provision of both analogue and digital outputs and in the event of power removal all user-defined parameters are retained.

Supplier: Cole-Parmer

Run multiple reactions in a single station, saving time and money.

Supplier: Cole-Parmer

Corrosion resistant baths with stainless steel inners for easy cleaning.

Supplier: Cole-Parmer

High temperature cooling coil, Cole-Parmer®, For: All Cole-Parmer IC-300 series immersion circulators

Supplier: Cole-Parmer

Compact, high quality, easy to use measurement system for routine analysis in education, environmental analysis, healthcare, food and quality control.

Supplier: Cole-Parmer

Flexible heating tapes are designed to fit metal pipes and glassware.

Supplier: Cole-Parmer

Hybridisation Oven

Supplier: Cole-Parmer

Simple solution for laboratories requiring compliance.

Supplier: Cole-Parmer

Designed to determine the protein content of food.

Supplier: Cole-Parmer

Don't get burned - the outside stays 'safe to the touch'.

Supplier: Cole-Parmer

Electronic ice bucket ceramic beads, material: ceramic-coated, Cole-Parmer®

Supplier: Cole-Parmer

Gentle stirring action promotes high cell yields.

Supplier: Cole-Parmer

Hybridisation tubes, large, with end caps, for HB-3D, Type: Techne, Borosilicate glass 3.3, Ø×L: 80×240 mm

Supplier: Cole-Parmer

Unstirred water bath

Supplier: Cole-Parmer

These Techne® compact Dri-Block® heaters provide precision temperature control for general heating and incubating applications as well as sensitive analytical procedures in microbiology and clinical laboratories. They are designed for precise heating of test-tubes, microcentrifuge tubes, cuvettes and microtitre plates and can hold any combination of aluminium insert blocks, depending on the model.

Supplier: Cole-Parmer

Standard solutions are used for calibrating conductivity cells.

Supplier: Cole-Parmer

Opening in base accommodates a wide variety of flasks and 60° funnels.

Supplier: Cole-Parmer

These spectrophotometers are designed to provide a compact instrument for use in education and quality check laboratories.

Supplier: Cole-Parmer

These spectrophotometers have more advanced features including.

Supplier: Cole-Parmer

4510 is an easy-to-use meter offering the flexibility to meet the broadest range of applications and for those where greater accuracy is required. With automatic conductivity standard recognition and endpoint detection. 4520 is a high specification laboratory conductivity/resistivity/TDS/salinity/°C meter that offers additional accuracy with 1, 2 or 3 point conductivity calibration across a wide measurement range. The dedicated 'pure water' mode ensures the optimum accuracy for this difficult application.

Supplier: Cole-Parmer

Heater element temperature max. 220 °C; magnetic stirrer speed: 100 to 800 min⁻¹. Base unit accommodates choice of three interchangeable cartridges: 250, 500 or 1000 ml round bottom flask sizes.

Supplier: Cole-Parmer

The RS reaction stations has different positions that can be programmed to run at the same temperature and stirring rate simultaneously.

Supplier: Cole-Parmer

Melting point capillaries, closed both ends,100 × 2,0 mm, Electrothermal

Supplier: Cole-Parmer

This gelation timer is designed for accurate measurement and quality control, for the gelation of resin or adhesive based samples in the laboratory.

Supplier: Cole-Parmer

Multi-position magnetic stirrer designed for optimal suspension cell culture and the use of microcarriers. The system from Techne® consists of a stainless steel stirrer platform with locators for the glass culture vessels (not included). The design of the vessels, together with the bulb-ended stirrer, ensures that the cells are lifted into suspension at the lowest possible speeds. This gentle stirring action promotes high cell yields by preventing cell shearing.

Supplier: Cole-Parmer

Block heater block, Techne®, ³PrimeX block, 48×0,2 ml