435 Results for: "CONTEC"

Supplier: CONTEC

This standard weight wipe with textured surface is knitted from filament polyester. It is ideal for effective cleaning.

Supplier: CONTEC

Quiltec I wipes offer the highest sorptive capacity of any sealed edge wipe available. They are manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe.

Supplier: CONTEC

Contec HydroPure is a blend of 6% stabilised hydrogen peroxide and water for injection (WFI) or purified water. Contec HydroPure is BPR authorised at EU level and is efficacious against bacteria, fungi, moulds and yeasts.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

These low endotoxin wipes are made from 100% knitted polyester and pre-saturated with a blend of 70% USP-Grade IPA and 30% water for injection (WFI).

Supplier: CONTEC

100% nonwoven polyester wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

This sealed foam swab consists of a polyurethane foam bonded to a flex-tip PP handle.

Supplier: CONTEC

Neutral detergent with purified water. NeutraKlean is a gentle and low-foaming detergent designed for the cleaning of life science cleanrooms.

Supplier: CONTEC

This non woven, meltblown PP wipe is pre-saturated with 91% isopropanol and 9% deionised water.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

Presaturated wipes can offer many benefits over bottled alcohol and dry wipes for cleanroom use. Contec’s sterile SATWIPES Theta with 70% denatured ethanol consist of a perforated roll of presaturated wipes which are dispensed through a convenient centre pull canister.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water

Supplier: CONTEC

Presaturated with 70% USP grade IPA and 30% DI water.

Supplier: CONTEC

These PROSAT® Sterile™ Theta™ wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

These heat seal wipes are made from filament polyester that is laser cut to bond the fibres at the edges of the wipes. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. The wipes are saturated with 70% USP grade IPA, 30% DI water.

Supplier: CONTEC

Contec® Sterile NeutraKlean is a gentle and low-foaming detergent designed for the cleaning of life science cleanrooms. Ready to use, irradiated neutral detergent with purified water.

Supplier: CONTEC

Contec Sterile Denatured Ethanol is a blend of 70% v/v denatured ethanol with 30% water for injection or purified water. Contec’s ethanol is only denatured with IPA creating a very low residue product.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with knife cut edges.

Supplier: CONTEC

EasyReach™ is recommended for effective cleaning and disinfection of surfaces of separative devices such as: Isolators, restricted access barrier systems (RABS), laminar airflow hoods, bio safety cabinets, glove boxes, incubators and clean air hoods.

Supplier: CONTEC

SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester presaturated with IPA and DI water.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges and increased sorbency.

Supplier: CONTEC

These hydrophilic polyurethane foam wipes are engineered for use in cleanroom and other critical applications. They combine high absorbency with extremely low levels of extractable residue and particles.

Supplier: CONTEC

Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment. Made from 100% textured polyester no-run knit.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

QuickTask™ mopping system. The QuickTask™ product line consists of a variety of knitted polyester, polyester/cellulose, microfibre/foam and microfibre flat mop heads that are easily installed onto a hinged mop head frame and QuickConnect interchangeable handle. QuickTask™ mop head frames are available in stainless steel or durable, autoclavable polypropylene.

Supplier: CONTEC

Thermally bonded non woven PP and cellulose quilted wipes, two layers of PP trap the cellulose core, which allow this material to be very absorbent, with a high level of cleanliness.

Supplier: CONTEC

These lightweight, polyester disposable mops are excellent for applying disinfectants and for wet cleaning of vertical surfaces, ceilings, and walls in controlled environments. Ideal for reaching awkward corners and ceilings with a complete range of motion.

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

Contec ProChlor is a fast acting innovative sporicidal biocide designed for use in pharmaceutical cleanrooms. A blend of hypochlorous acid in purified water. Ready-to-use format.

Supplier: CONTEC

The SATWipes are made of pure non woven polyester that is hydraulically entangled creating a soft, durable and clean wipe. The saturation of either alcohol/deionised water or 100% alcohol provides a safe and mild cleaning solution.