3520 Results for: "Binder"

Supplier: Binder

Factory Fitted Options for Binder FP Heating Chambers

Supplier: Binder

Accessories for drying ovens with natural convection ED series, Avantgarde.Line

Supplier: Binder

Temperature test chamber

Supplier: Binder

Calibration digital pressure display, including certificate. Measurement at specified pressure, range 20 - 900 mbar, For: VD and VDL

Supplier: Binder

Environmental test chamber

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

The KB series with compressor cooling consumes up to 30% less energy compared to its predecessor. Refrigerated incubators are mainly used for culturing tasks that need to be carried out at temperatures below room temperature or if high ambient temperatures cannot be avoided. The cooling system and the controllable fan guarantee high degrees of humidity even during cooling mode, or prolonged testing, to protect samples from drying out even when fully loaded.

Supplier: Binder

Shelves, Stainless steel shelf, For: BF/FD/FED 260

Supplier: Binder

KMF constant climate chambers ensure constant test conditions throughout the stainless steel chamber even with a full load and only require a small amount of bench space. Units can be operated with Binder Pure Aqua Service, a flexible water purification system (optional) or deionised water. Units self-test for comprehensive status analysis.

Supplier: Binder

A powerful all-rounder among constant climate chambers: Equipped with all kinds of sophisticated technology, the KBF PRO with proven APT.line™ preheating chamber technology takes any material test in its stride – whether it takes place at -20 °C or under THB conditions at +85 °C and 85% relative humidity. Units have a stainless-steel inner chamber and temperature range of -20 to +100 °C and humidity range of 10% to 98% RH. The models offer flexible water supply options for all installation sites and consumes up to 40% less energy than its predecessor, the KMF model. Optional light modules are also available to turn the KBF PRO into a chamber for ICH photostability testing or plant growth.

Supplier: Binder

Vacuum drying ovens with stainless steel inner chambers. All units have a microprocessor controller with two programs, 10 sections each or, alternatively, one program with 20 sections. The time interval of a single program section can be adjusted up to a maximum of 99,59 or 999,59 hours on all program sections. Units have an adjustable TWB Class 2 safety device with visual alarm. GLP/GMP compliance is assisted by the integral RS422 interface and optional APT-COM™ DataControlSystem software.

Supplier: Binder

RS422/RS232 interface converter

Supplier: Binder

Avantgarde. Line incubators ensure stable and reliable incubation of microbiological cultures and guarantee reproducible results for routine tests in the laboratory – even high batch throughputs and with long-term operation. Avantgarde. Line BD models have natural convection ensuring rapid temperature equalisation after the door is opened. The BF models have forced convection via a fan. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution, excellent temperature uniformity and low fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

With natural convection, Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. APT.line™ pre-heating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. These units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

Extended warranty for Binder KT refrigerated incubators

Supplier: Binder

These energy efficient cooled incubators have been designed for use in the temperature range from 4 to 100 °C. They feature a Peltier cooling system for finely controlled cooling down to 4 °C together with powerful conventional heating. The unit has easy to clean stainless steel interior and inner safety glass door. The incubators are ideal for use in microbiology, genetics, zoology, food and beverage industries, medicine, forensics, pharmaceutical and cosmetic industries. USB port for reading data and ethernet interface for communication software APT-COM™ DataControlSystem.

Supplier: Binder

CO₂ Incubator

Supplier: Binder

CO₂ Incubator

Supplier: Binder

CO₂ Incubator

Supplier: Binder

Foam-filled compartment doors with gasket, For: UF V 350

Supplier: Binder

CO₂ incubators with a built in CO₂ sensor which can be sterilised. Units offer optimum growth conditions for cell cultures and meet demanding requirements for best possible cell growth and maximum sample safety. The ANTI.PLENUM design minimises surfaces due to the seamless, deep-drawn inner chamber without fixtures and featuring an integrated shelf support system. This reduces the risk of contamination, giving less surface area and fewer parts to clean manually, and removes the running costs of consumables. Reliable decontamination is provided by the standard-compliant 180 °C hot air sterilisation routine which completely eliminates contaminants and ensures the inner chamber is completely sterilised.

Supplier: Binder

Universal drying ovens with stainless steel chambers which are ideal for use in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable TWB class 2 safety device with visual alarm and adjustable ventilation by means of ventilation slide and 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change.

Supplier: Binder

With forced convection and enhanced timer functions, the Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ preheating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

The powerful KB Series of cooling incubators for microorganisms are able to incubate with exceptional precision even when fully loaded. Units have a stainless-steel inner chamber, feature proven APT.line™ preheating chamber technology, have a temperature range of 0 to +70 °C, hot-air disinfection routine, and can be programmed for weekend operation with ease. This KB unit consumes as much as 40% less energy than the previous model.

Supplier: Binder

The durable and affordable CB-S series incubators are suitable for routine cell cultivation applications in the field of cell production, particularly in academic settings. They are contamination proof due to the 180 °C hot air sterilisation cycle and reliably pH stable thanks to drift-free infrared CO₂ measurements conducted in real time.

Supplier: Binder

Temperature test chamber

Supplier: Binder

Environmental test chamber

Supplier: Binder

Series CB-S incubators are suitable for routine cell cultivation applications: They are free from contamination due to 180 °C hot air sterilisation and reliable pH stability thanks to the drift-free infrared CO₂ measurement system.

Supplier: Binder

CO₂ sensor, CO₂ sensor

Supplier: Binder

Standard Incubator