You searched for: Pumps

Supplier: Dr. Weigert

Drum Pump, Dispenser for 5 L, 10 L and 12 kg canisters (30 ml stroke)

Supplier: Lenz Laborglas GmbH & CO.KG

Robust design water jet pump made of borosilicate glass.

Supplier: GRANT INSTRUMENTS

All in one system with integrated pump designed for routine aspiration of the supernatent alcohol/buffer from the walls of microtubes during DNA/RNA purification and other macromolecule reprecipitation techniques. An ideal personal tool for independent operation away from an in-line lab vacuum supply.

Supplier: EDWARDS HIGH VACUUM METTLER

The E1M18 and E2M18 pumps are direct drive, sliding vane pumps. The E1M18 is a single-stage pump, and the E2M18 is a two-stage pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.

Supplier: EDWARDS HIGH VACUUM METTLER

These nXDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise.

Supplier: EDWARDS HIGH VACUUM METTLER

These XDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including water, solvents, dilute acids and bases. It also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Comes with integrated inverter drive with auto sensing voltage input delivers optimised pumping performance. The pumps are completely field serviceable.

Supplier: BUCHI

These V-300 PTFE diaphragm vacuum pumps impresses with its very silent and economical operation. These pumps have been operated at a flow rate of 1,8 m³/h and an ultimate vacuum of 5 mbar.

Supplier: witeg Labortechnik

Water jet pumps made of brass and nickel-plated.

Supplier: BUCHI

These powerful and quietly operating three-stage V-600 PTFE diaphragm vacuum pumps are robust and highly flexible. These pumps have been operated at a flow rate of 3,1 m³/h and an ultimate vacuum of 1,5 mbar.

Supplier: ALCATEL

This single-stage pallet pumps are ideal when a high condensing vapour pumping capacity is required or when a low limiting pressure is not required. For all common non-corrosive applications requiring high vacuum.

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: BUCHI

Diaphragm vacuum pump is made up PTFE and it is chemically resistant with a space saving design. It meets all the needs of vacuum generation. It is usable for multiple applications such as evaporation, drying, concentration, suction straining and filteration. It is a maximum longevity product due to robost and stable design and integrated ECO² mode.

Supplier: ALCATEL

C1 PASCAL rotary vane vacuum pumps are designed for pumping corrosive or aggressive gases in the chemical industry and R&D. It has a universal one phase or three phase motor. The two stage pump offers compact design and very low oil mist levels even with frequent cycling between atmosphere and ultimate pressure.

Supplier: FLUX FRANCE

A modular range of motors and pump bodies enables a multitude of combinations and provides a solution for each specific application.

Supplier: EDWARDS HIGH VACUUM METTLER

These high performance rotary pumps are used in many industrial and laboratory applications. They offer the option of high throughput or high ultimate vacuum by the adjustment of a single control. RV pumps can be run continuosly with inlet pressures up to 50 mbar or can be set to achieve an ultimate partial pressure of 1×10⁻⁴ mbar. For drying applications the water handling capability is 290 g per hour at vapour pressures up to 80 mbar (RV 12).

Supplier: EDWARDS HIGH VACUUM METTLER

Clean and overhaul kit

Supplier: LABCONCO

Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.

Supplier: EDWARDS HIGH VACUUM METTLER

Pump includes all of the components required for laboratory applications such as those found in wet chemistry and sample preparation. It allows for continuous running even in the presence of water and solvents and incorporates an integral fast acting inlet valve that holds the system under vacuum in case of a power failure. Ideal for use with rotary evaporators, centrifugal concentrators, vacuum ovens, distillation/extraction apparatus, fume hoods, glove boxes and vacuum filtration equipment.

Supplier: LABCONCO

Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: ALCATEL

Two-stage Rotary Vane pumps with increased resistance to meet the requirements of the more aggressive processes of the semiconductor industry application.

Supplier: EDWARDS HIGH VACUUM METTLER

E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.

Supplier: FLUX FRANCE

JUNIORFLUX pump is ideal for filling, emptying, transferring or dispensing small amounts of liquid out of carboys, hobbocks, canisters, narrow-necked containers or barrels. Wetted parts are made of polypropylene, ETFE, ceramic oxide/PTFE/carbon,
FKM, Hastelloy C.

Supplier: ALCATEL

This SD series dual stage rotary vane vacuum pump is designed and manufactured to meet the demanding requirements of various industrial and scientific applications. Suitable for several purposes (non-corrosive applications) such as manufacture of light bulbs, production of TV tubes, manufacture of electronic tubes, metallurgy, centrifuges, etc...

Supplier: EDWARDS HIGH VACUUM METTLER

ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Supplier: BUCHI

V-850 vacuum controller:
The V-850 vacuum controller with ¼" LCD VGA screen can be used universally for the display, control and adjustment of vacuum. The vacuum controller is a compact unit suitable for many tasks in the laboratory thanks to its integrated vent valve and chemical-resistant pressure sensor. It includes a timer, laboratory vacuum controller (Labvac) and solvent database featuring the 43 most commonly used solvents. The rotation speed control with the V-700 or V-710 vacuum pump enables accurate, hysteresis-free vacuum control with quiet operation.
Users also have the option of reducing their water consumption by adding a cooling water valve.

Supplier: HARVARD APPARATUS

Peristaltic Pump P-70 offers unparalleled accuracy, reproducibility, and ease of use. P-70 drive provides flow rates from 0,001 to 70 ml/min.

Supplier: Spectrum Laboratories

Spectrum's KrosFlo Research I (KRI) system combines a digital peristaltic pump and a multi-purpose lab stand to provide ultimate convenience and efficiency for experiments involving fluid circulation and transfers. The easy-to-operate digital KRI pump drives the fluid stream through flexible tubing (to be order separately) while the incorporated stand and included holders secure the tubing, filters, reservoirs and other components in place.

Supplier: Lenz Laborglas GmbH & CO.KG

Duran®, with hose connections. With spiral nozzle. For high performance.

Supplier: Sartorius

The hand operated vacuum pump made of PVC is used as practical vacuum source for outside of a laboratory.

Supplier: Thermo Scientific

Vacucenter™ is a vacuum pump cabinet fully equipped with a central power supply, a single main switch for both vacuum oven and pump including a timer for tracking oil changes for the rotary vane pump.