You searched for: Ovens

Supplier: Thermo Fisher Scientific

Heating and drying ovens with stainless steel chambers, which are designed for routine applications. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection are suitable for faster drying and heating, and superior temperature uniformity.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with coated or stainless steel exterior. The timer allows the oven to be turned on or off after a preset time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and superior temperature uniformity.

Supplier: Thermo Scientific

Vacuum drying ovens with stainless steel chambers, vacuum fittings, tubing and ball valve. Units are designed for gentle drying of heat-sensitive samples and have adjustable temperature limit protection, protection Class 2 (DIN 12880, Part 1).

Supplier: Thermo Fisher Scientific

Heratherm™ large capacity ovens were designed for larger samples or high sample volume. All models have a large, easy to view, vacuum fluorescence display and simple to use touch button operation which is controlled by a microprocessor and automatic over-temperature alarm system to protect samples. All units are available in convenient 230 V version - no special connection required.

Supplier: Thermo Fisher Scientific

Lindberg/Blue M Moldatherm box furnaces are versatile selection for a variety of industrial and laboratory applications.

Supplier: UVP ULTRA VIOLET PRODUCTS

The ultimate oven for multiple motion options, the Multidizer oven comes with both a rotary wheel (in the lower chamber) and a reciprocating shaker tray (in the upper chamber). It also offers a rocker tray and/or orbital motion tray as options. These are to accommodate different containers and usages. The lower chamber of the unit is the same as for the HB-1000 and operates independently of the top chamber.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with coated or stainless steel exterior (SS models). The timer allows the oven to be turned on or off after a pre-set time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and offer superior temperature uniformity.

Supplier: Thermo Fisher Scientific

Thermolyne™ muffle furnaces offer heating solutions for a number of application needs, from general laboratory use to industrial applications. Units are ideal for fast heat up and temperature control up to 1200 °C. The furnaces are used for chemical analysis, materials testing, determination of volatiles in waste water treatment plants, industrial plants, pharmaceutical and cosmetic companies, environmental laboratories, agriculture laboratories and paper manufacturers.

Supplier: BOEKEL SCIENTIFIC

RapidFISH slide hybridisation oven was designed to simplify fluorescent in-situ hybridisations procedures for FFP samples, cell suspensions, and other tissue preparation procedures.

Supplier: BOEKEL SCIENTIFIC

Hybridisation and wash methods vary according to application and personal choice. Boekel Scientific offers a range of hybridisation incubators with features that include digital display for ease and reproducibility of temperature setting; microprocessor or proportional temperature control; rapid heat-up, optimised heater power and natural or forced air convection.

Supplier: Cole-Parmer

Use and recover volumes as low as 5 ml, ensuring preservation of precious samples.

Supplier: Cole Parmer

Versatile - features both rotisserie and rocking motions.

Supplier: NABERTHERM

Ovens that are designed for drying and evaporation of solvent-containing materials. Furnace based technology utilised for ovens, units have a 1.4301 (DIN) stainless steel chamber, which is rust-resistant and easy to clean, they feature horizontal forced convection.

Supplier: Thermo Scientific

The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Supplier: Thermo Scientific

For incineration and annealing loss determinations, high temperature drying, materials testing and ashing processes on a laboratory scale. The heating coils are located and protected in T fixtures at the sides of the working area and the chamber inner surfaces are ceramic plates. They are easy to replace, with no renewal of the insulating material necessary. Optimum insulation and heating conditions produce a consistent temperature distribution in the oven chamber: max. fluctuation of 13 K.

Supplier: BOEKEL SCIENTIFIC

The Shake ‘N’ Bake hybridisation oven is ideal for hybridising and pre hybridising membranes used in Southern and Northern blotting techniques. The gentle rocking motion provides washes that are less messy than a shaking water bath and more convenient than a shaker inside a conventional incubator. The small footprint conserves valuable bench space.

Supplier: SELECTA

The 'Digitheat' 2000 series drying and sterilisation ovens with microprocessor control and digital display have a corrosion resistant, epoxy coated exterior and an AISI 304 stainless steel double chamber, with self adjusting door seal and adjustable shelves and guides. They have an independent insulated control panel with controllable safety thermostat that disconnects the power to the heater in the event of a fault in the microprocessor, manual reset and function signal lamp. Independent heating chamber for the heating elements to obtain an even heat distribution and rapid temperature equilibrium and stabilisation.

Supplier: SELECTA

The 'Digitronic' universal precision ovens of the 2000 series with microprocessor control and digital display of temperature with pre-set programmable run time and pre-set temperature monitoring using a Pt100 sensor probe. The inner chamber and pre-mixing chamber are made of AISI 304 stainless steel and epoxy coated exterior. The shelves are made of stainless steel, with adjustable height positions for shelves and guides and with flexible silicone door gasket around the entrance of the door. The homogeneously distributed shielded heating elements ensures complete air circulation throughout. The turbo fan made of AISI 304 stainless steel makes to circulate the air at the working temperature. The models are available either with toughened double safety glass door for viewing the contents of the oven without having to open the door or with the solid metal door.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Stainless steel exterior and interior.

Supplier: PHC Corporation

Chemically resistant ovens with stainless-steel interior and glass wool insulation. MOV-112/212 with natural convection system are ideal for drying smaller samples and finer particles, which would otherwise be scattered when using a fan, whereas MOV-112F/212F feature a forced air circulation system providing quicker drying at an even temperature.

Supplier: NABERTHERM

These compact tube furnaces with a SiC rod heating and integrated switchgear with controller can be used universally for many processes. They represent an inexpensive variant in the high-temperature range. The standard mounting options for accessories make them flexible for use in a wide range of applications.

Supplier: NABERTHERM

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, make these tube furnaces suitable for integration into existing process systems.

Supplier: NABERTHERM

These compact bench top tube furnaces with integrated controllers can be widely used for a variety of processes. Equipped with a standard C 530 ceramic working tube and two fibre plugs they have an unbeatable price/performance ratio. Units feature rust-free, textured stainless steel exteriors. R models feature Tmax 1200 or 1300 °C, RD models have Tmax 1100 or 1300 °C.

Supplier: GENLAB

These Genlab drying cabinets are suitable for general purpose warming applications and drying glassware or instruments. Made from sheet steel finished in an easy to clean powder coated paint. Fitted with adjustable shelf runners, removable plated wire grid shelves and ventilation holes. Insulated models (IWC) give energy savings of over 30% compared to the non-insulated range (DC). Heated by Incoloy sheathed elements in the base of the unit. The 500 and 1000 litre models have fan assistance as standard. All units have toughened glass doors; 125 and 250 litre models have sliding doors and the 500 and 1000 litre models have hinged doors. Units are controlled via a direct reading thermostat with calibrated scale and tamper-proof lock. The units also have an illuminated mains switch with heat indicator.

Supplier: GENLAB

These Genlab E3 drying cabinets are suitable for general purpose warming applications and drying glassware or instruments. All models in this range are fully insulated for improved efficiency and energy savings.