You searched for: Heaters

Supplier: RSG

Heater, Spirit lamp, Burner, with wick regulation and cowl, Stainless steel, ±60 ml

Supplier: WARTEWIG

Mobile handheld laboratory gas burner with piezo ignition. The solution for flame sterilisation in the microbiological or biotechnological fields. The burner is lit as soon as the bar is pressed. The flame can be regulated in size and is extinguished by release of the bar.

Supplier: RSG

These burners are made up of stainless steel.

Supplier: JUCHHEIM Laborgerate GmbH

Teclu safety burner with needle valve and thermofeeler with safety valve on heavy, round base.

Supplier: R L ENTERPRISES

The burner is constructed with a gas control needle valve. Specially designed conical mixing chamber is incorporated, which allows the burner to give off a very hot flame.

Supplier: WARTEWIG

The Flame 100 is ideally suited for all flame related applications in the laboratory. The flame starts immediately at the push of a button; a match or pilot flame is not necessary.

Supplier: WARTEWIG

Gas-Safety Adapter C 206, 1,5 bar for Flame 110.

Supplier: MURRAY S

Heater, Spirit lamp, Spirit lamp, glass with fitted wick in ceramic burner, Glass, 100 ml

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Extra long lighter with electronic ignition.

Supplier: JUCHHEIM Laborgerate GmbH

With three valves.

Supplier: RSG

Bunsen burner made of stainless steel.

Supplier: MURRAY S

Bunsen burner with heavy gauge steel base.

Supplier: schuett-biotec GmbH

Safety bunsen burner made of polished stainless steel and safety glass. Ideal for use in microbiological safety cabinets or in the chemical laboratory.

Supplier: JUCHHEIM Laborgerate GmbH

Teclu burners with needle valve.

Supplier: WARTEWIG

Fuego SCS and Fuego SCS pro gas safety burners have the latest safety technology. Thanks to their innovative design and an extensive range of standard equipment, these laboratory gas burners are suitable for all applications that require a flame in the laboratory. The low profile housing allows you to work in comfort, and the streamlined design reduces the impact of air currents on clean room workbenches. The SCS (safety control system) uses the latest safety technology, constantly analysing potential dangers and triggering protective measures when necessary - such as the interruption of the gas supply. After prolonged use a residual heat indicator signals that the burner head is still hot, to help to prevent burns. Made entirely of stainless steel, and thanks to its fireproof controls and a display protected by special glass, the Fuego SCS can withstand even extreme laboratory conditions.

Supplier: WARTEWIG

Gas-safety adapter 360 for Flame 100.

Supplier: WARTEWIG

The gasprofi 1 SCS is the laboratory gas burners with IR sensor, button function, foot pedal and safety package SCS. Made of stainless steel and guarantee the highest degree of sterility.

Supplier: K-Factory

Electric burner for sterile manipulations. Ideal for glass working.

Supplier: WARTEWIG

Gas-safety adapter CV 300 - 1,5 bar for Flame 110.

Supplier: KLS Martin Group

Gas burners, nickel plated, for gas pressure up to 500 mm water gauge.

Supplier: witeg Labortechnik

Heating mantle, Flask capacity: 6000 ml, Ø×H: 325×226 mm

Supplier: SELECTA

Burners with gas (butane/propane) and air regulator.

Supplier: K-Factory

Unique multifunctional and reliable. Air flow over the whole unit 800 °C. Resistant against chemical fluid spillages. Suitable for biological and chemical work.

Supplier: witeg Labortechnik

Heating mantles WHM for flasks, 450 °C for use with external controller. Ideal for spherical flasks 50 to 6000 ml.

Supplier: witeg Labortechnik

Heating mantles with aluminium exterior and fabric interior. The integrated K-type thermo-sensor is basically embedded (except fabric mantles) which enables precise control of the mantles when used together with remote digital controller. External thermo-sensor is available, which enables precise control of the temperature of liquid sample in the vessel when used together with remote digital controller.

Supplier: K-Factory

Heating process based on a patented hot air column system. The burner has the same applications as bunsen burners.

Supplier: GERHARDT

For 250 to 1000 ml flasks. Stainless steel reflector with built-in heating coil for heating.

Supplier: GESTIGKEIT HARRY

Heating plate, Hotplate, HT 33-400, aluminium alloy plate , Temp.: 130...370 °C, Heating area: 430×580 mm, Heating capacity: 4000 W, W×D×H: 442×592×170 mm

Supplier: GESTIGKEIT HARRY

Aluminium alloy plate, stainless steel housing with variable temperature control.

Supplier: GESTIGKEIT HARRY

Ceran® THERM CT 10 is an glass ceramic instrument. It is extremely resistant to breakage, temperature changes, will not distort and permeable to UV light and also highly acid resistant. The temperature is controlled by an output controller without any performance loss. Heating time for 500 °C is approximately 3 min. The low mass CERAN® plate with a central diameter of 150 mm is electrically heated and is mounted on a stainless steel housing.