You searched for: Tubing

Supplier: Thermo Fisher Scientific

Slide-A-Lyzer MINI Dialysis devices, 3,5K MWCO, are disposable polypropylene cups with integrated, low-binding membranes for dialysis and high recovery of proteins and macromolecules >3,5 kDa in volumes from 10 µl to 2 ml. They were developed as a convenient means for dialysing small-volume samples of nucleic acids and proteins without undue sample loss. Low molecular weight contaminant removal, buffer exchange, desalting, equilibrium dialysis, micro conjugation reactions, and concentration can be accomplished with these devices.

Supplier: GRANT INSTRUMENTS

Tubing kit 2×2 m, assembled with OptimaTM pump outlet plate and simple hose clips, no tools required (can be cut to length as required).

Supplier: GLASWARENFABRIK KARL HECHT

AR-Glass®, clear.

Supplier: Honeywell Chemicals

This hose is suitable for all drums, use in combination with dispensing system or dispensing head.

Supplier: Hach

PTFE titrant delivery tip for use mounted on delivery tubing.

Supplier: Thermo Fisher Scientific

These devices can be used for a wide range of applications including low molecular-weight contaminant removal, buffer exchange, desalting, equilibrium dialysis, and concentration. The cassette membrane is composed of low-binding regenerated cellulose and features a hermetically sealed sample chamber to maintain the highest possible sample retention. This type of membrane is compatible with a number of common chemicals and buffers. The colour-coded transparent frames of the Slide-A-Lyzer® cassette allow instant recognition of the MWCO of the membrane and make viewing the needle easier during sample injection.

Supplier: Cytiva

Purge tubing kit

Supplier: Cytiva

Ethylenetetrafluorethylene tubing (ETFE) is designed for use with AKTA systems.

Supplier: BURKLE

Pressure tubing made from reinforced fabric.

Supplier: BURKLE

Tubing made of soft PVC, cadmium-free, with high resistance to chemicals, high flexibility and permanent crystal clear transparency and excellent abrasion resistance.

Supplier: Cytiva

PEEK, Tubing kit, PEEk/ETFE, including: 2 x PEEK tubing 0,33 m length, 2 x PEEK tubing, 0,15 m length, 1 x PEEK tubing , 0,46 m length, 1 x PEEK tubing , 0,47 m length, 1 x PEEK tubing, 0,41 m length, 1 x PEEK tubing, 0,62 m length, 1 x PEEK tubing, 0,47 m length, 1 x PEEK tubing, 0,18 m length, 1 x PEEK tubing, 0,37 m length, 1 x PEEK tubing, 0,16 m length, 1 x ETFE tubing, 0,45 m length, 1 x ETFE tubing, 0,11 m length, 1 x ETFE tubing, 0,12 m length, 1 x ETFE tubing, 0,6 m length, 1 x ETFE tubing, 1 m length, 1 x ETFE tubing, 40 x finger tight connector, Ø int.: 1,00 mm

Supplier: Cytiva

Pump tubing for AKTA flux, AKTA flux is a versatile cross flow filtration system for sample concentration and diafiltration (buffer exchange) as well as cell harvest and clarification.

Supplier: VITLAB

Intake tube for micro-dispensers, piccolo 1 and 2, PTFE, Length: 150 mm

Supplier: Cytiva

Polyetheretherketone tubing (PEEK) is intended for use with AKTA systems.

Supplier: HIRSCHMANN

Tese sanitary silicon tubes are platinum cured silicon tube, ultra smooth inner wall, non-toxic, non-haemolytic, non-pyrogenic.

Supplier: HIRSCHMANN

These tubes are for extreme environmental conditions due to its high chemical resistance, resistantance to ozone, sunlight and the weather, extremely tear resistant, high flexibility and elasticity.

Supplier: BURKLE

Silicone tubing is a versatile transparent hose.

Supplier: HUBER

Tubings, insulated, Rubber, Tubing int.Ø: 17 mm, Wall thickness: 7 mm

Supplier: Spectrum Laboratories

Silicone, translucent.

Supplier: HIRSCHMANN

These tubes are used for industrial applications for its bending fatigue strength, good abrasion resistance and low gas permeability when compared to rubber tubes.

Supplier: DWK Life Sciences

Tubing for 0,3 to 10 ml syringes, made of long lasting medical quality silicone.

Supplier: HUBER

Insulated smooth silicon hose, ends covered with silicon caps, fixed length and drain tubing with variable length.

Supplier: HIRSCHMANN

These tubes are biocompatible for sensitive pharmaceuticaland biotechnological applications with good general chemical resistance, excellent resistance to acid, alkali and oxidation, impermeable to light and UV radiation.

Supplier: HIRSCHMANN

These ultra-pure tube free of softeners for applications in the food industry and aggressive media with broad chemical resistance, free of softeners.

Supplier: HIRSCHMANN

These tubes are used in chemical application for its very high chemical resistance to acids, bases, salts, ketones, alcohols.

Supplier: COWIE

PTFE, white.

Supplier: HIRSCHMANN

These tubes are used for hydrocarbons and mineral oil products due to its low gas permeability, ozone resistant.

Supplier: HIRSCHMANN

Non-DEHP and phthalate-free for laboratory appications.

Supplier: DWK Life Sciences

Silicone, translucent or FKM (Viton), black.

Supplier: Cytiva

Made of Perfluoroethylene-propylene copolymer (FEP).