You searched for: Stoppers

Supplier: DWK Life Sciences

Igloo lyophilisation style stoppers.

Supplier: MACHEREY-NAGEL

PE plugs with a diaphragm for safe penetration of the needle are used for the shell vials.

Supplier: DWK Life Sciences

These stoppers are made from grey butyl rubber.

Supplier: BURKLE

These conical silicone rubber stoppers are translucent, chemically-biologically neutral, food-safe according to BfR Recommendation XV and FDA § 177.2600.

Supplier: witeg Labortechnik

Hollow standard taper stoppers with hexagonal grip, made of borosilicate glass 3.3.

Supplier: witeg Labortechnik

Solid standard taper stoppers with octagonal grip, made of Borosilicate glass 3.3.

Supplier: SciLabware

These glass stoppers are ideally suited for use with Quickfit® jointed glassware and other glassware having standard ground glass sockets.

Supplier: GLASWARENFABRIK KARL HECHT

Stopper, DURAN®, hollow, 34/35, Clear glass

Supplier: witeg Labortechnik

ST-hollow stoppers, with extra long stem, for BOD-bottles, made of borosilicate glass.

Supplier: SciLabware

Quickfit® iodine flask stoppers.

Supplier: Hach

Ideally can be used as a small beaker, sample cup for pH meters, flame photometers and automatic analysers.

Supplier: NEUBERT VOLUME GLASSWAERE

Solid glass stopper made of borosilicate glass 3.3 octagonal.

Supplier: DWK Life Sciences

These PE stoppers have an ergonomic grip that makes the opening and closing of the flasks easier and more secure. Coloured inserts in the different sizes of stoppers allow the easy identification of the corresponding ground (NS/TS) neck size.

Supplier: NEUBERT VOLUME GLASSWAERE

Six sided, solid glass stopper.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

These coloured conical stoppers are made from silicone foam.

Supplier: Greiner Bio-One

This ceaprene stopper is made of water-repellent material.

Supplier: BRAEMSWIG

Natural cork, A1 quality

Supplier: SEMADENI

Lamellar stoppers made from soft PE-LD.

Supplier: GERHARDT

This connection stopper is made from viton and is suitable for distribution heads with connection pipe Ø 32,7 mm.

Supplier: HIRSCHMANN

Stopper for Standard Ground Joints, PE, NS: 7/16

Supplier: BRAEMSWIG

These conical stoppers are made of cork.

Supplier: LEY RUBBER

Turnover stoppers create a very effective double seal for narrow aperture containers.

Supplier: Edwin Mraz Kunststoff-Erzeugnisse GmbH

HDPE stopper, white with red cover plate. Hollow, with sealing rings and octagonal head.

Supplier: LP ITALIANA

PE stopper.

Supplier: LP ITALIANA

Stopper, Winged, PE, Ø bottom: 11 - 13 mm, Natural

Supplier: LEY RUBBER

Red rubber stoppers as Cat. No. 391-2100 but with one standard hole of 5 mm diameter.

Supplier: BEHR

These glass stoppers can be used instead of DIN/DEV diagonally cut stoppers. They are easy to use due to the lack of the easily broken edges.

Supplier: SciLabware

These glass stoppers are ideally suited for use with Quickfit® jointed glassware and other glassware having the shorter 'C' length ground glass sockets.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

These cylindrical shaped stoppers are made of chlorobutyl rubber and are used for injection bottles.

Supplier: HERENZ HEINZ

Original Steristoppers® have been proved as an excellent sealing for microbiological samples and tissue cultures in test tubes and Erlenmeyer flasks. They are in constant use in many world famous microbiological laboratories.