You searched for: Membrane Filters

Supplier: Sartorius

Non sterile membrane filters for colony counting, particle testing, microscopy and sterility testing. The membrane filters are made of cellulose nitrate (cellulose ester).

Supplier: Sartorius

These cellulose nitrate membranes are suitable for air monitoring.

Supplier: Sartorius

Cellulose nitrate hydrophilic, gridded membrane filters for colony counting, particle testing and microscopy, with outstanding recovery rates for microorganisms.

Supplier: Merck

Ultrafiltration membranes - Amicon™ XM polyacrylonitrile/PVC co-polymer filters. High-recovery membranes for stirred cells.

Supplier: Cytiva (Formerly Pall Lab)

Strong, chemically resistant membranes for air monitoring and sampling in aggressive environments.

Supplier: Merck

PVC membrane filters are specified by ASTM, NIOSH, and OSHA in air monitoring applications to analyse silica, carbon black, metals, quartz particulates and others.

Supplier: Sartorius

PES membrane filters are hydrophilic, have high flow rates thanks to the symmetric structure, have a low non-specific protein adsorption and are chemically resistant over a pH range of 1 to 14. They are recommended for the filtration of aqueous solutions as well for the protein filtration. Furthermore, the low level of extractables makes them suitable for environmental analysis.

Supplier: Whatman products (Cytiva)

A polyester backed and highly consistent membrane for use with low viscosity samples in a lateral flow assay.

Supplier: Sartorius

PTFE hydrophobic membrane filters. For filtration of air, gases, solvents and acids. Sterilisation by autoclaving or ethylene oxide.

Supplier: Bohlender

Membrane filters made of microporous PTFE, with 0,2 mm thickness.

Supplier: Merck

Durapore® PVDF white membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.

Supplier: Sartorius

These are general purpose membrane that provide excellent performance with most solutions when retentate recovery is of primary importance.

Supplier: Sartorius

Membrane filters manufactured from high grade PC film using track etch technology. Applicable for particulate analysis, epifluorescence miroscopy, fluid clarification, cytology, cell biology, bioassays, water microbiology, environmental analysis.

Supplier: Merck

MF-Millipore™ filters without Triton® surfactant contain minimum amounts of wetting agent and have a lower water extractable content than standard MF-Millipore™ filters.

Supplier: Merck

Nylon filters are compatible with a broad range of solvents. Two types of filters are available, membrane filters with pore sizes ranging from 0,20 to 1,20 µm and woven net filters with mesh openings ranging from 10 to 180 µm.

Supplier: Sartorius

Gelatine membrane filters in conjunction with the MD8 air samplers (gelatine filter method) are used for the collection of airborne microbes and viruses. These filters are completely water-soluble, therefore, microbes in one sample can be cultivated in different nutrient media or low and high bacteria counts can be measured.

Supplier: Cytiva (Formerly Pall Lab)

The next generation of universal hydrophilic PTFE membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive solvents.

Supplier: Cytiva (Formerly Pall Lab)

Hydrophilic PES Supor® membrane for reduced filtration time, optimised for biological, pharmaceutical and sterilising filtration requirements.

Supplier: Sartorius

Hydrophilic polyamide (nylon) membrane filters. For the filtration of alkaline solutions and organic solvents.

Supplier: Merck

These silver membrane filter are suitable for a variety of applications and are commonly used for air monitoring and analysis of particulate contaminants. They are specified for collection and detection of particles such as silica, carbon black, coal tar products and coke oven emissions.

Supplier: Sartorius

These membrane filters have high hydrophilicity and exceptionally low non-specific binding characteristics. These membranes are ideal for sample cleaning and protein removal and when high recovery of the filtrate solution is of primary importance.

Supplier: Cytiva (Formerly Pall Lab)

Good prefilter made from PP/PE for heavily particulateladen and viscous fluids. Can be used as separators between stacked discs in a single filter holder during serial filtration.

Supplier: Merck

Biologically inert mixtures of cellulose acetate and cellulose nitrate have made MF-Millipore™ membrane filters one of the most widely used membranes in analytical and research applications.

Supplier: ENTEGRIS

These filter disc series with non-woven PP media can be used for simple, quick and efficient filtration of fluids used in laboratory, pilot and small scale applications. Can be used for clarification of acids, bases and solvents.

Supplier: ENTEGRIS

These filter disc series can be used for simple, quick and efficient filtration of fluids used in laboratory, pilot and small scale applications.

Supplier: Sartorius

These sterile cellulose nitrate and PES Microsart® e.motion membrane filters can be used for colony counting, particle testing and microscopy. They are specifically designed for use in the Microsart® e.motion dispenser.

Supplier: Cytiva (Formerly Pall Lab)

These membranes have been designed specifically for use with the Sentino® automatic filter dispenser.

Supplier: Sartorius

Hydrophobic cellulose nitrate and cellulose acetate gridded membrane filters for colony count and sterility testing, with outstanding retention rates for microorganisms.

Supplier: Merck

Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing 'FHUP' are unlaminated, or produced without a backing.) Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.

Supplier: Whatman products (Cytiva)

Nuclepore™ track-etched hydrophilic membrane filters offer a highly defined pore size cut-off in the submicron range, enabling particle deformity measurement and capture of extremely small particles. The membranes have sharply defined pores, high flow rates, and excellent chemical and thermal resistance. They are suitable for a variety of samples and applications, including microscopy, cytology, parasitology, and certain air and oceanography analyses.