You searched for: Filters

Supplier: Merck

ORBO™ 80 is a glass fiber filter coated with 1-(2-pyridyl)piperazine.

Supplier: Merck

Precolumn filter kit has a standard 10-32 fitting and fits direct to most column types without introducing an additional dead volume.

Supplier: VWR Collection

VWR®, Frosted filter

Supplier: Avantor

This is a fingertight bioanalytical inline filter, comprising a PEEK holder and a 5 μm titanium PEEK-encased frit.

Supplier: VWR Collection

Filter vials with the membrane, PE snap ring cap (11 mm), with hole and silicone white/PTFE red septa.

Supplier: Merck

Designed for extracting large volumes of aqueous samples. Suitable for EPA methods and environmental methods.

Supplier: Avantor

Placed immediately before the column, the precolumn filter traps particles introduced with the sample. For samples, which may irreversibly absorb onto the column, the use of guard cartridges is strongly recommended.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: VWR Collection

Filter cartridge, VWR®, Sterile filter 0,2 µm

Supplier: VWR Collection

VWR® Gas venting filters are designed for obstructing bacterial, particles or moisture when venting in different applications. Sterile venting of bioreactors, fermentation tanks, media flasks, and carboys. Sterile gas purge of cell culture vessels or filling vessels. In-line sterilisation of and particulate removal from air and gases. Obstruct moisture to protect equipment.

Supplier: Avantor

These syringe filters are specifically designed for chromatography sample preparation applications and optimised to provide the most consistent results with less extractables.

Supplier: VWR Collection

Typical applications are clarification, sterile filtration, sample preparation and sterile venting.

Supplier: Merck

This economy water vapor trap is designed for moisture removal for compressed air service to pneumatically-controlled devices.

Supplier: VWR Collection

These units are ideal for minimising unnecessary transfers by filtering directly into the centrifuge tube.

Supplier: Avantor

The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Supplier: Merck

Solid phase extraction disks provides faster flow rates and exhibits less clogging than PTFE discs for the extraction of organic contaminants from drinking water samples.

Supplier: VWR Collection

PP insert and receiver tube. MWCO filters are ideal to concentrate, purify and desalt peptides, proteins, oligonucleotides, DNA and RNA.

Supplier: VWR Collection

Cyto strips made of filter board for cytocentrifuges. Absorption of excess liquids from the staining of samples in cytologic analysis. Can be used in Shandon and Sakura Cyto-Tek® cytocentrifuges.

Supplier: Avantor

These precolumn filters with PEEK body and stainless steel frit provide protection for analytical and microbore columns. They connect directly to the column without the need for an additional holder.

Supplier: VWR Collection

Binder-free glass fibre filters feature fast flow rates, high loading capacity, wide thermal tolerance and excellent precipitate retention.

Supplier: VWR Collection

Low nitrogen content filters for determination of nitrogen content in steel and iron samples dissolved in acid. Filtration of fine precipitates to dissolve according Kjeldahl method.

Supplier: Avantor

Avantor® ACE® UHPLC pre-column filters made from stainless steel/PEEK provide protection for all UHPLC columns. They offer ultra-low dispersion for maximum compatibility with UHPLC instruments and columns. For use with Waters 'Classic' Acquity® systems, an alternative Waters Acquity® compatible version provides improved performance.

Supplier: Avantor

These filters are made from 100% PEEK.

Supplier: Avantor

Avantor® Hichrom, Frit, Porosity: 2,0 µm, Frit material: PEEK

Supplier: VWR Collection

These vacuum filter units are very useful in large volume samples separation and purification.

Supplier: VWR Collection

424: Filtration of lead sulphide, iron sulphide, silver sulphide, alkali carbonate, lead chromate, arsenic, antimony, cadmium and foodstuffs. Determination of sand content in dairy products. Determination of whiteness of pulp in paper mills.

Supplier: VWR Collection

PS funnel and collection reservoir. Systems for vacuum filtration of aqueous solutions including cell culture media, buffers or other biological fluids.

Supplier: VWR Collection

Hydrophobic filter paper used for separation of aqueous solutions from organic solutions.

Supplier: 3M

Adflo™ particulate and gas filters are replacement, high-efficiency filters designed for use with 3M™ Adflo™ powered air purifying respirators.

Supplier: VWR Collection

Designed for the preparation of buffers, tissue culture media, microbiological media and other biological fluids. These vacuum filtration systems feature large diameter high performance PES membranes for guaranteed performance and maximum throughput. The full assembly includes a filtration unit and a receiver bottle with an ergonomic shape, moulded finger grips and a patented bottle cap. The centrifuge tube and funnel system allows the user to filter fluids directly into a 15 or 50 ml tube.