You searched for: Electrodes

Supplier: Mettler - Toledo

These combination pH electrodes with built-in temperature sensor are designed for highly demanding chemical processes.

Supplier: Thermo Orion

These versatile 3-in-1 pH/ATC probes can be used in either the field or a plant.

Supplier: BTX

The BTX Meander Fusion Chamber is a novel microslide design which is specifically used for electro cell fusion. The chamber generates a divergent field and is used for fusion of mammalian cells, plant, yeast, fungi and microorganisms.

Supplier: Cole Parmer

Keep your homogeniser up and running.

Supplier: Mettler - Toledo

Electrode, Redox/KF, EM43-BNC, pH: -, 0...+100 °C, Glass, Diaphr.: -, Electrolyte: -, BNC, fix cable, For: KF and redox titrations of food ingredients

Supplier: YSI ENVIRONMENTAL

YSI 3200 series conductivity cells have built-in thermistors, allowing automatic temperature compensation. All YSI cells are calibrated according to the International Organization of Legal Metrology recommendations 56 and 68.

Supplier: YSI ENVIRONMENTAL

Dip type conductivity cells made from 7740 PYREX borosilicate glass. For use with the 3100 and 3200 conductivity benchtop instruments (cell adapter required).

Supplier: Mettler - Toledo

The InPro3030 is a state-of-the-art, gel-filled, low-maintenance pH electrode specifically developed for inline pH measurements in bioprocesses.

Supplier: KNICK

SE 202: 2-electrode sensor with integrated temperature probe (NTC 30 kohm) and flow cell.

Supplier: WTW ONLINE

The SensoLyt® measuring chains with arming are easy to install and boast flexible measuring and application areas. Eletrodes without arming can be connected directly to a pH monitor of the EcoLine® or QuadroLine® series. Depending on the application, they can be installed into a flow vessel.

Supplier: Greisinger

Working and calibration set consisting of: 5×GPH 4, 7 and 10 buffer capsules each, 3×100 ml GPF 100 plastic bottle, 1×3 mol KCL: electrolyte, KCL3M and 1× cleaning solution GRL 100

Supplier: Mettler - Toledo

These low-maintenance pH electrodes are supplied complete with factory-filled, prepressurised liquid electrolyte and suited to a wide scope of applications in the biotechnology and pharmaceutical industries. The electrodes have been designed for use at medium operating pressures and in particular where reliable and highly accurate measurements are of special importance.

Supplier: Mettler - Toledo

Pressure-resistant, low maintenance electrodes with built-in temperature sensor for universal use in industrial wastewater processes.

Supplier: WTW ONLINE

The special design of the process line electrodes makes them close to optimal in their accuracy, stability, speed and longevity to liquid electrolyte electrodes. For the use in pipelines, they can be installed into the replacement fitting CHEMtrac 830 M.

Supplier: Hach

Immersion or flow-through probe with optical luminescence measuring method. The luminescence method means the measurement is unaffected by any type of interference. The sensor features PROGNOSYS which is a predictive diagnostic system that allows users to be proactive in their maintenance, by alerting them to upcoming instrument issues.

Supplier: Mettler - Toledo

405-DPAS is a pre-pressurized, gel-filled, low maintenance pH probe, specially developped for in-line measurements in biotech and food and beverage applications.

Supplier: CHEMPUR

Electrode for electrogravimetrical identification of Cu and Zn by Winkler method.

Supplier: Cole-Parmer

Electrode, pH

Supplier: Hach

This three-pole platinum cell with an integrated Pt1000 temperature sensor provides accurate, stable results over a wide measurement range.

Supplier: WTW ONLINE

With the NitraLyt® Plus 700 IQ, nitrate can be determined directly in the medium. This makes measured values available in a timely manner and they can easily be used for regulation purposes.

Supplier: HORIBA

Electrode, pH

Supplier: Thermo Orion

These durable conductivity cells provide high performance conductivity measurements.

Supplier: METROHM

Surfactant electrodes for two-phase titration.

Supplier: Cole-Parmer

Combined electrodes for use with Jenway ion meters.

Supplier: CONSORT

Electrode, ORP, Platinum ORP (redox) electrode, 0...±2000 mV, Single junction, sealed, 0...+80 °C, Epoxy, Ø×L: 12×110 mm, S7

Supplier: Cole-Parmer

A variety of pH electrodes for your Jewnay meters.

Supplier: Mettler - Toledo

The polarographic sensor InPro6850i is an intelligent all-rounder that uses the new 3-electrode system. A separate platinum anode increases the signal stability especially in low oxygen levels.

Supplier: Lovibond

Combined pH/temperature electrode with temperature sensor NTC 30 kOhm and BNC connection.

Supplier: WTW ONLINE

Electrode, Dissolved Oxygen, Ecoline, TriOxmatic® 690-7, 0 - 60 mg/l; 0 - 600%, 196 mm, 7 m cable, with watertight plug (IP65)

Supplier: Cole-Parmer

Electrode, pH, Combination pH electrode, bulb, pH: 1 - 14, 0...+80 °C, Glass, Diaphr.: Annular ceramic, Electrolyte: 4.0M KCl/AgCl (refillable), Ø×L: 12×350 mm, BNC, 1 m cable, For: Measurements in large flasks