"PerkinElmer"
Gas purification systems
Supplier: PerkinElmer
Moisture, oxygen, and other trace contaminants found in carrier or make-up gases can greatly affect your analysis and instrument performance. They can cause ghost peaks and degrade your column. Gas filters and traps can remove up to 99,9999% of these unwanted contaminants, increasing the life of your column life and decreasing stationary phase bleed.
Expand 1 Items
Calibration standard, single element, iridium for AAS and ICP-OES, pure grade
Supplier: PerkinElmer
Until 10th October 2017 it is still allowed to use mercury thermometers if they are exclusively intended to be used for tests as per standards which require the usage of mercury thermometers.
Expand 1 Items
Gas purifier, 73-099 AA
Supplier: PerkinElmer
This wall mounted gas purifier system is designed to purify compressed air and acetylene gas.
Expand 1 Items
Antimony standard solution, for ICP-MS, Pure Plus grade
Supplier: PerkinElmer
Single element standard is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.
Expand 1 Items
Antimony standard solution, 1000 mg/L Sb in dil. nitric acid (from Sb₂O₃) standard for AAS and ICP
Supplier: PerkinElmer
Antimony Standard, 1000 mg/L, Antimony, Matrix: 2% HNO₃, Application: ICP standards
Expand 2 Items
Rubidium standard solution, 1,000 mg/L Rb in dil. nitric acid (from RbNO3) standard for AAS and ICP
Supplier: PerkinElmer
Rubidium Standard, 1000 mg/L, Rubidium, Matrix: 2% HNO₃, Application: ICP standards
Expand 1 Items
Rhodium standard solution, 1,000 mg/L Rh in 10% hydrochloric acid (from RhCl3) standard for AAS and ICP
Supplier: PerkinElmer
Rhodium Standard, 1000 mg/L, Rhodium, Matrix: 10% HCl, Application: ICP standards
Expand 1 Items
Selenium standard solution, 1,000 mg/L Se in dil. nitric acid (from Se) standard for AAS and ICP
Supplier: PerkinElmer
Selenium Standard, 1000 mg/L, Selenium, Matrix: 2% HNO₃, Application: ICP standards
Expand 2 Items
Yttrium standard solution, 1000 mg/L Y in dil. nitric acid (from Y₂O₃) standard for AAS and ICP
Supplier: PerkinElmer
Yttrium Standard, 1000 mg/L, Yttrium, Matrix: 2% HNO₃, Application: ICP standards
Expand 1 Items
Tungsten standard solution, 1000 mg/L W in water (from (NH₄)₂WO₄) standard for AAS and ICP
Supplier: PerkinElmer
Tungsten Standard, 1000 mg/L, Tungsten, Matrix: H₂O, Application: ICP standards
Expand 1 Items
Bismuth standard solution, 1,000 mg/L Bi in 10% nitric acid (from Bi) standard for AAS and ICP
Supplier: PerkinElmer
Bismuth Standard, 1000 mg/L, Bismuth, Matrix: 10% HNO₃, Application: ICP standards
Expand 1 Items
Multi-element calibration standard 5
Supplier: PerkinElmer
Designed to contain virtually every element in the mass spectrum for concentration checks.
Expand 1 Items
Capillary columns, Elite-XLB for autosystem
Supplier: PerkinElmer
Elite-XLB capillary columns are specialty phase for GC/MS with exceptionally low bleed.
Expand 3 Items
Capillary columns, Elite-5 Amine for autosystem
Supplier: PerkinElmer
Elite-5 Amine capillary columns are ideal for the analysis of amines and other basic compounds.
Expand 7 Items
Chromium standard solution, 1,000 mg/L Cr in dil. nitric acid (from Cr(NO₃)₃.9H₂O) standard for AAS and ICP
Supplier: PerkinElmer
Chromium Standard, 1000 mg/L, Chromium, Matrix: 2% HNO₃, Application: ICP standards
Expand 1 Items
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.



